Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Is the dewalt 735x a good fit for me.

Featured Replies

I have a lot of reclaimed oak 2x4 and 4x4 that Im trying to clean up for projects. Im using a hand electric planer at the moment and had considered buying lunchbox style next year if the money was there. I was in a store and came across a sale and it was nib and 440.00 out the door. I have 60 days to return if its still in the box so since it was over an hour away and the sale ends soon I picked it up and can return If I changed my mind. I was wondering if this unit would be good for my needs? From what I read the blades might not be up to the job but I can get better ones down the road for 70.00 or carbide for around 150.00. Heard some complaints about the prices of the blades. I have nothing to compare them to vs other planes, will the price of the blades eat me up or is it worth it for the price I got it for-assuming I got a good deal-I didn't see it anywhere else for that price.

 

I still will use the hand planer to clean the tops off so I don't send dirt through it. Ty for any response.

The DW735 or 735x are about as good as you will find in a portable planer. What you are doing is hard on any machine, you have to expect more frequent blade replacement. You MIGHT get away with light honing on those blades, but if I recall correctly, they have index holes that prevent the adjustment needed to accomodate a full re-grind.


I can't see how you'd go wrong, since it's pretty much universally recommended as the best choice for a bench top planer. You'll probably just have to accept that you're going to wear out a set of knives doing this, but even though they're disposable there are 2 cutting edges, so you can flip them partway through. If it's not a ridiculous amount of material, I'd be tempted to skip plane all of it to remove the rough surface, then flip the knives to make finishing passes on project material.

52 minutes ago, Lester Burnham said:

The 735 is awesome. You'll love it. Do a search for it on here and in google and you'll see that it's a favorite of many. Get some ear plugs, it's loud. Get a hose/garbage can combo, bag, or truck to collect the chips and you'll be good to go.

 

I borrowed your image @RichardA hope you don't mind.

102_1369.JPG.91a033273541b4c84d1b28a8519ff124.JPG

Stop thief!   Use it whenever you need to.

That's how much I spent on mine at amazon, plus free shipping, so I can sympathize with your position.  It's a littel more planer than I really need, but the price was excellent, and I'm loving the X so far. 

Get a metal detector and make sure all the nails are out of those boards.  Check for Rocks and other hard debris too.  The blades like to nick easily.  But the planer should have no problem handling those boards. 

And even if you don't see yourself keeping the planer, at the price you paid, you could resell it used and at least break even. 

  • Popular Post

I would take a stiff brush to your boards and hit them with compressed air. After that, send the suckers through the new machine! You bought it to plane wood and save time, right? When i had my 735, i kept a used set of knives on hand for jobs like you describe. If i was planing questionable material, i would swap out my newer knives for the crap ones and avert the potential for nicking up fresh edges. You can change all three blades on the dewalt in a couple minutes. 

  • Author

Ty all for the replies. At the moment Im thinking of still using the hand one for just cleaning it up for storage so I can tell the condition of the wood and see the grain better. I just take couple quick passes just taking very little each pass. Then using the dewalt when Im ready for a project. Could have used it last week on a wall shelf for a friend. Have to use it before i really know what I want out of it but asking here to make sure it would do what I need. I have time off in the winters so it will be awile before it gets serious use.

As everyone else said, this is a good, inexpensive planer. I have owned mine for way more than 5 years; maybe closer to 10 and it still continues to function as well as it did the day I bought it. Knives do wear out, but sometimes you can find the Dewalt knives cheaper online and, if you use it a lot, it pays to have a set or two on hand. I would say that I don't think just paying more for new steel knives will make them any better. It's possible that the carbide knives might be a good upgrade, but the difference in cost might not justify the the difference in knife life. I have always thought it was borderline and I continue to use the Dewalt knives with great success.

I would recommend that you don't try to use the planer without dust collection though unless you are planing outside. The amount of dust, shavings, and chips that will accumulate can quickly build up to a large hill.

7 minutes ago, Randy said:

I would say that I don't think just paying more for new steel knives will make them any better.

i would disagree, i bought the replacement blades from Infinity Tools on the recommendation of @RichardA and found them to be a much thicker blade and last a lot longer than the standard Dewalt blades for about the same money, and they can be sharpened IMO.

You are not going to find a better portable planer and if the one you have is the 735x then there should be a second set of knives in the box.  Don't return it, you will regret it.

I bought mine in 2010, when home depot had their closeout.  Paid $270 out the door with the tables.  So I justified to myself that I could go along time the OEM blades.  Came to my senses last year ( I am a slow learner) and replaced the cutter head with a Shelix head.  With the number of blades I went through over the years, I figure I could have bought the Shelix 2x over.  Use the original blades on that reclaimed oak, and then upgrade to good steel/carbide or a spiral head. Either way your going to really like the planer.

  • Author

Ty for all the replies. Doubt I will take it back unless I fall into some kinda hard times in the next 2 months. Checked out the reviews on the infinity blades and helix head and will probably make some kinda switch when the ones I got wear out but have time to think about that. Defiantly going to check out making a trash can dc.

 

Some great news. At my parents today for lunch and rummaging around the garage looking for some old hand planers that are supposed to be there from my grandpa and I spied something under a bunch of stuff and said hey whats that. My dad says oh forgot about that, 20 years ago my uncle gave him a electric jointer planer made in Indiana, USA (forget the name brand) so I still have to test it out but its mine for the taking. My uncle always took good care of stuff so feel good that it should work. My dad is a garage hoarder and no telling whats in there.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.