Recommended Posts

Posted

I set up m 6" Delta grinder to have a buffing wheel on one side.

http://MvnQ6I2.jpg

The grinder came with two "stone" grinding wheels, and the manual doesn't really say if one should put different weight wheels on different ends of the shaft at the same time.

Is this okay? Are the bearings in the grinder alright with an unbalanced combination of wheels, or am I setting myself up for bearings over heating and premature seize-up?

Posted

Yes, it's OK to have different weight wheels on each side. I have that same grinder & pimped it out with a Lee Valley tool rest. The variable speed is sure nice too.

  • Like 2
Posted
3 hours ago, drzaius said:

Yes, it's OK to have different weight wheels on each side. I have that same grinder & pimped it out with a Lee Valley tool rest. The variable speed is sure nice too.

+1

Unless you have a HUGE difference in mass from one wheel to the other, as long as each wheel itself is balanced, then it'll be fine.  If you have a buffing pad on one side, and a flintstone-esque car wheel on the other, then you might start getting into wear issues in the bearings, but short of that, you're fine. 

  • Like 1
Posted
1 hour ago, Tom King said:

This one only has a wheel on one end.  It's running in that picture, and has been for several minutes while I went to the truck to get the camera.  I've used it like that for several years.  It still only has one wheel on it.post-14184-0-57062800-1391282795_thumb.jpg

Given the nature of that wheel, and it's intended use, do you ever worry about tiny vibrations affecting the edge of the blades?  I know I was professing how stable it would be with wheels of different masses, and.... nevermind.... just saw the coin!

What wheel is that?  I'm thinking about getting one of those for my turning tools. 

Posted

D-way fine, radiused edge.   I thought I might add the coarse wheel later, but this one cuts so fast that I don't need anything coarser.  I've never used the rounded edges that I can remember.  I remember that Derek has some sort of trouble with one of these radiused edge wheels, but I never had any trouble with this one.  If I had the order to make over, I'd get the straight edged one, but for turning tools the curve might be useful.

I'm usually set up in a Museum house, and don't want to grind metal in there, so mine gets little use.  I don't put my plane irons in anything that might nick an edge, and have so many chisels that if one needs to hit a grinder, it just gets put back in the Chisel toolbox until later. Otherwise, my sharpening setup is usually set up in a sink in the house, if there is one.

When I do have an edge to grind, this makes quick work out of it.

Since I took this picture, I picked up a Baldor 3/4 hp slow speed buffer that's as smooth running as the Metabo for 75 bucks.  I'm going to change to the slow speed one for this wheel.  This high speed one doesn't burn an edge unless you try, but cuts so fast that sometimes it's hard to control.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 54 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined