bushwacked Posted June 21, 2017 Report Posted June 21, 2017 https://www.amazon.com/dp/B001PTGBSK/ref=pd_luc_rh_bxgy_01_04_t_img_lh?_encoding=UTF8&psc=1 After all the planing for the kitchen helper, I was curious if something like this would actually be beneficial? I know not often I need wood at an exact thickness, I just need everything the same thickness. However, my thought on it was it would make it a little easier to just read the thickness I am I at. The clunky red Dewalt 735 gauge thing was kinda hard to tell exactly where I was. However I knew I needed to get to 3/4 so I just set the stop at 3/4 so I couldnt go past it. Is it one of those things that kinda nice to have, but not needed at all? Quote
21meyer Posted June 21, 2017 Report Posted June 21, 2017 I think you will receive quite a few responses that will deem it unnecessary. Personally, I use mine every time I plane. Even though it is accurate enough to use for final dimensioning, I rarely use it that way. Everything is relative to the current project. My planer has anti-kickback fingers that grab the wood as soon as I start to feed. It is a pain to try to set the height by eye because of these fingers. I work with very rough stock of varying thickness and the DRO saves me a lot of time setting the initial height of my planer along with subsequent passes. The planer is the only machine I use this on and have no plans to add it to my drum sander, table saw, jointer, etc. 1 Quote
wdwerker Posted June 21, 2017 Report Posted June 21, 2017 A pair of calipers is what I use. Dial calipers that read in inch/ fractions most of the time and digital calipers if I'm flipping between metric & inch. Having said that I'm eyeing the Wixley for my next drum sander. 1 Quote
Llama Posted June 21, 2017 Report Posted June 21, 2017 26 minutes ago, wdwerker said: Having said that I'm eyeing the Wixley for my next drum sander. That makes more sense to me than for the planer. And I'm saying this as I'm awaiting delivery of a planer that comes with a damn digital readout. Quote
Chet Posted June 21, 2017 Report Posted June 21, 2017 53 minutes ago, wdwerker said: Having said that I'm eyeing the Wixley for my next drum sander. I like this idea. Quote
bushwacked Posted June 21, 2017 Author Report Posted June 21, 2017 58 minutes ago, Llama said: That makes more sense to me than for the planer. And I'm saying this as I'm awaiting delivery of a planer that comes with a damn digital readout. haha, which one? Quote
Llama Posted June 21, 2017 Report Posted June 21, 2017 Just now, bushwacked said: haha, which one? You'll see soon enough Quote
Guest Posted June 21, 2017 Report Posted June 21, 2017 1 hour ago, wdwerker said: A pair of calipers is what I use. Dial calipers that read in inch/ fractions most of the time and digital calipers if I'm flipping between metric & inch. Having said that I'm eyeing the Wixley for my next drum sander. I have the wixey on my drum sander and is useless. On my sander, at least, I can take multiple passes without adjusting the drum and each pass will remove a little more material (after about 4 passes it stops removing material) but the gauge oviously can't help determine a precise thickness. I don't find it useful for adjusting the conveyor to even a rough estimate. It is faster just to feed my stock in and crank up the conveyor until my stick kisses the spinning drum. Quote
Guest Randy Posted June 21, 2017 Report Posted June 21, 2017 I have had it installed on my Dewalt 735 since around the time it came out. I find that it is easier to read the thickness you're at and, if I need to take just a small amount off to get boards to an in-between size, it is very accurate. Of course, the exact measurement you will get on the planer might be slightly different than if you measured it with a dial caliper or a digital caliper. However, checking the final dimension with my caliper usually gives me the same thickness within a few thousandths, which is usually beyond my needs. It is definitely not a necessary addition to the planer, but I really like it and would buy another one if my current one stopped working for some reason. It has operated well for about 5 years. Quote
gee-dub Posted June 21, 2017 Report Posted June 21, 2017 DRO use seems to fall into two camps, "gotta have it" or "who needs it". I ran a Wixey on my DW734 for years and loved it. When I moved to a floor machine I bought a DRO with that capacity from Grizzly (IGaging I think). It works great, is very reliable and allows "going back" to make a part that got botched or missed. Just so we don't get the impression that I am gadget-happy, I added a DRO to my router table which I find I never use. It works fine, I just do not have the call for it that I thought I would. The DRO on my tablesaw is indispensable and I would get another one immediately if it disappeared. So, from my experience and the sorts of things I do . . . DRO on the tablesaw and planer? Absolutely. DRO on a jointer or a router lift? Who cares. Quote
Ronn W Posted June 22, 2017 Report Posted June 22, 2017 I find that a dial caliper does the job for me and it is useful for a lot other things like checking the depth of mortises, checking thicknesses at other places in the shop. I see the unit you are talking about as a one trick pony. Quote
Guest Randy Posted June 22, 2017 Report Posted June 22, 2017 By its very design and purposed it is a "one trick pony". It's designed to be mounted on the planer and to provide accurate readings of wood thickness. If it's zeroed out correctly to begin with, it will do just that down to a couple of thousandths if desired (or even if it isn't desired). I have found it's a great accessory for the planer and makes it easy to see exactly where you're at with regard desired thickness. If you want to make a very fine pass for the final cut, it allows you to do that very easily. I can see how the digital gauge for the table saw would be a great accessory also from the standpoint of accuracy of rips and for the drum sander (especially for sanding veneer). I never bought the router version for my Incra table because the Incra lift is already so accurate it really wouldn't provide any additional accuracy or precision. Again, it definitely isn't a necessity but, for me, it is a great assist. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.