Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Figured Redwood

Featured Replies

  • Popular Post

A little wood porn for ya.

59974706db10b_WoodPorn.thumb.JPG.ff4a3583c0a8083d664d118c01ee7b3b.JPG

Bookmatched Figured Red Wood Veneer.

You will notice the grain is actually running north south, while the figure/quilting is running East west.  Each piece of veneer is about 16" wide, and 14' long, there are 2 pieces in this photo, with a bit of a third beneath the one.It was on a pallet of maybe 300-400 bf of this veneer, all pretty much identical figure.  The figure is so pronounced, that in the right light, it looks severely warped,  and you have to lay your hand on it to convince your brain it actually is flat. 

 

 

Beautiful stuff.  Are you sure you didn't mean square feet?  3-400 board feet of veneer is enough to wallpaper the Empire State Building.

  • Author

Pallet was 4 of these across, 14' long, and stood about 3 ft high.  Each layer was about 1/16" of an inch, but if we double that for air gaps.....

Carry the 2....

Roughly 448 bf,  Around 21,500 sqf. 

But even with math errors, which I probably have, it was a ton of beautiful wood. 

 

Dont tell me they are going to paint this to look like red oak. :)

17 minutes ago, Marmotjr said:

Pallet was 4 of these across, 14' long, and stood about 3 ft high.  Each layer was about 1/16" of an inch, but if we double that for air gaps.....

Carry the 2....

Roughly 448 bf,  Around 21,500 sqf. 

But even with math errors, which I probably have, it was a ton of beautiful wood. 

 

Wow.  That's a lot.  What are they doing with it, paneling?

  • Author
12 minutes ago, Eric. said:

Wow.  That's a lot.  What are they doing with it, paneling?

Not sure, They are setting it up for a customer's project. 

I'm guessing they have a membrane press for veneer ? Handling raw veneers, cutting and flattening, seaming pieces together to make a face sheet  etc. are totally different from most woodworking skills.

Maybe you can collect a few offcuts to play with at home ?

Thats gorgeous. Now i want a veneer press even more.

 

Sent from my SM-N910W8 using Tapatalk

 

 

4 hours ago, shaneymack said:

Now i want a veneer press even more.

It really amazes me that you don't have one.  You have a $10,000 machine for making dowels yet no veneer press???:o

  • Author

I think they have 3 presses, each looking like it's capable of squashing a car.  They buy the veneer when it becomes available, and let it sit till they find a customer.  There's a whole department that does nothing but veneering of materials. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.