Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Painting

Featured Replies

This week I am building more kids furniture with Marc's table and chairs set from Woodworkers Fighting Cancer a couple years back.  For those not familiar, it's 100% plywood. 

I'll likely paint it white.  I've had mixed results painting projects in the past with usual household latex paint.

Marc used lacquer, added white pigment, and HVLP'd it.  This is feasible and a more attractive option, but the only turbine I have is the single stage Rockler $100 thing.  I've never even used it. 

What say the collective here?  

 

I don't know what your set up is for finishing but with this type of finish I think you will want to be in the great out doors or you will need a spray set up with some kind of explosion proof fan to move the fumes out.    But as far as the single stage and lacquer i don't think you would have any problem.

 

  • Author

Basically anything that's not Arm R Seal is outside my wheelhouse, lol.  I can set up saw horses on my back patio and spray outside. 

I bought the Rockler cheapie sprayer to spray latex paint (when I was getting lousy results with a brush) before I knew better.  When it didn't work I put it away and forgot about it. 

I'm up for trying it on this, but I don't want to dump a bunch of cash on lacquer and pigment if it's going to look like crap or if the sprayer isn't going to cut it. 

Maybe the bad experience comes from using wall paint on wood. Wall paint is for walls, not wood. A good paint for wood is acrylic. Do you have any paint stores close by? Expect to spend about $30.00 a gallon. Shoot, you can even apply with a 4" roller. 

The best results will require multiple coats and sanding between coats to get a nice smooth finish. 

 

-Ace-

  • Author
23 minutes ago, AceHoleInOne said:

Maybe the bad experience comes from using wall paint on wood. Wall paint is for walls, not wood. A good paint for wood is acrylic. Do you have any paint stores close by? Expect to spend about $30.00 a gallon. Shoot, you can even apply with a 4" roller. 

The best results will require multiple coats and sanding between coats to get a nice smooth finish. 

 

-Ace-

That's another piece I was looking for.  No one talks about painting wood so no one says what to use.  I have a Sherwin Williams less than five minutes from the house, so resources for lacquer or paint are close. 

17 minutes ago, bleedinblue said:

That's another piece I was looking for.  No one talks about painting wood so no one says what to use.  I have a Sherwin Williams less than five minutes from the house, so resources for lacquer or paint are close. 

Unfortunately, the good pigmented lacquers are kinda of thick and you need a good amount of air to atomize it. Maybe try a pint of BIN primer, it's a tinted white shellac. If the el'cheap'o gun can push it. Then topcoat the BIN with a good water-based topcoat to get it butt smooth and offer some protection.  

You are looking to coat things white?

 

-Ace-

You would have to thin it way down, to use that sprayer.   Get some SW Pro Classic, and play with it.  It's a step up from regular paint, but not quite up to the fancier coatings.  It does spray nicely, and would be worth a try with your sprayer.   I've sprayed it a number of times with an airless sprayer, to a professional looking finish.  It's a good go-to when you are not close to a pro store.

Jeff Jewitt’s spray finishing book says to use an acrylic trim paint for woodworking. GF milk paint is actually a high quality acrylic paint - it’s not cheap but sprays like a dream with HVLP and 1.8mm set. 

  • Author

To make sure there is no confusion, if I use paint, I will NOT use this sprayer.  I'll brush or roll it on.  The sprayer is only an option if I go with a tinted lacquer. 

A tinted waterbourne acrylic is a great way to go for a furniture grade painted finish. I prime & sand ( sometimes twice) then go back and refill any small flaws that always appear before starting with the finish coats. And yes it's usually more expensive than house paint or lacquer, but I get great results and no flammable odors.

9 hours ago, wdwerker said:

A tinted waterbourne acrylic is a great way to go for a furniture grade painted finish. I prime & sand ( sometimes twice)

What are you using for a primer under the acrylic?

I spray a pre-cat waterborne by ML Campbell called Agualente . They make a primer for the pigmented version and a sanding sealer for the clear coatings . 

A lot of waterborne finishes can be used without a primer. It’s just a little harder to sand and has to dry a bit longer. At around $55 a gallon for the primer and $68 for the tinted finish and spray application only it’s usually only sold at pro dealers. The 1-2 hour drying time before sanding & recoating can mean several coats in one day which makes it worthwhile for me.

General Finishes has come out with a pre cat waterborne but I haven’t tried it yet . Some of Generals products are usually only marketed to the pro market .

@wdwerker Oh okay...I think I misread your earlier post. I thought you were talking about using SW Proclassic. That's what I was curious about which primer you were using. 

House paint and Turbine HVLP isn't a good mix. I've got a 4 stage turbine that will run 2 guns, made by American Turbine, $$$ , and I wouldn't even try putting that stuff in my gun. They make airless sprayers for housepaint . Or you can rent one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.