Recommended Posts

Posted

Hello all,

I am just getting into woodworking. For the last year I have done a good amount of milling oak trees into lumber. 

Now, I am trying to get a wood shop. I have built a few small tables but nothing to much yet. I have basic tools such a miter saw, belt sander, jigsaw, and a few other small tools. 

I am looking to purchase my first table saw and could use some advise. I have been doing some research and there is so much out there to pick from. 

My budget is around 1,200$. I will be doing a lot of thicker hardwood cuts, sometimes on boards that are slightly warped. I have 220V power in my garage as well. 

Any recommendations are greatly appreciated!

Posted

Grizzly is your most bang for your buck. However some people have had quality issues requiring repairs or returned machines. That said, I am not one of them and have owned a grizzly machine for years with zero difficulties.

For that budget and a desire to cut thicker hardwoods in one pass I would say you are best off with a 3hp machine which means the only other option is buying a used machine. Is that an acceptable option for you? If so what city and state are you  near?

 

Posted

Thanks for the quick relpy!

Yeah, I have been looking into Grizzly for the last year or so and now that I am in a position to buy a saw I did some more research. I know someone that had a Grizzly lathe that did not last long and have heard other quality issues with them so I am a little hesitant to buy Grizzy, although they seem like a great price for the saw. 

 

Buying used is absolutely acceptable for me. I have been looking here and there for used table saw and used planer/jointer. 

Posted

Hi, and welcome! 

$1200 is a pretty good budge, so I'm sure you'll be getting some good advice.  Grizzly does offer a lot for the money (from what I've read).

I'm more interested in what you mean by "sometimes on boards that are slightly warped" ... can you elaborate?  Cutting warped/non-flat boards on a TS can lead to kickback and serious injuries....

  • Like 2
Posted

Craigslist is your best bet for used saw. At that price range you can buy a very nice used machine. Powermatic 66 or Unisaws are both good options. You should be able to get a 2 to 5 hp motor on one of those saws. What city and state do you live near? A quick search could show some good options.

 

Edit: also yea, you can't use a table saw on warped boards. You will want a planer and a jointer as well.

Posted

Thank you, I appreciate it!

 

What are some saws you have used/owned that you have been happy with?

 

I milled the wood on my own for the first time and I did not put enough weight when drying them so they are twisted. Some are worse than others. The ones that are bad I will most likely not end up doing anything with and just burning in my wood stove. 

Posted

I would be initially cutting these down on a band first.  Not being flat and not knowing how they are going to react can (and has to several of us) cause the wood to pinch the blade and create issues you don't want.  I've had them squeeze hard enough to crack the wood away from my cut line.

As for the saw, I've had good luck with the Grizzly but, not everyone here has.  With your budget and set up, I think I'd be looking for a used Powermatic PM66 or maybe you'd get lucky on a PM2000 in that price range.

Posted
Just now, nmazzino said:

What are some saws you have used/owned that you have been happy with?

 

I milled the wood on my own for the first time and I did not put enough weight when drying them so they are twisted. Some are worse than others. The ones that are bad I will most likely not end up doing anything with and just burning in my wood stove. 

I had a 1950 unisaw for several years and its a great saw. Mine had a 1 hp motor so it would be under-powered for what you are wanting. I have not owned a pm66 but I have used one a couple of times and I own a powermatic jointer. Powermatic makes some very nice machines. Anything made in the 70s or later has a chance of having a 3hp motor on it. Or a saw that has a non-original motor. 

If you go the used route you will also have to replace some bearings and belts after you buy the saw. You should be prepared to make that happen or else forget the used market.

Regarding twist, any board that rocks on a couple of points when put on a flat surface can not be used as is through a table saw. However using a jointer and planer you can flatten a board with twist and do so safely. If you cut a board with some twist in it you can have kickback which means your board gets caught on the blade and then flung back at you at the 3500 rpm speed of the blade. At that point the best you can hope for is the board misses you. If it hits you then you can have anything from broken fingers, to broken arms, to broken noses, to being impaled on the board.

Posted

Thank you for the advice. I cut a square line with a circular saw on the planks before running on the table saw. Needless to say I am also looking for a jointer/planer combo before doing anymore work

I did find a PM66 used but it is 3 hours away from me and I am not sure if I have means of transporting it yet. I am also nervous about transporting/setting up something like that causing issues with the saw. Is that something I should be worried about? 

Posted
1 minute ago, nmazzino said:

Thank you for the advice. I cut a square line with a circular saw on the planks before running on the table saw. Needless to say I am also looking for a jointer/planer combo before doing anymore work

I did find a PM66 used but it is 3 hours away from me and I am not sure if I have means of transporting it yet. I am also nervous about transporting/setting up something like that causing issues with the saw. Is that something I should be worried about? 

If the saw is in good shape, you shouldn't have any issues moving it.  There's not a whole lot that can go wrong.

Make sure the saw has a riving knife!

Posted

A PM66 will likely not have a riving knife unless it was recently made. So you are going to want to get a splitter system of sort and actually use it. There are cheap systems available and more expensive. 

Moving such a machine is actually pretty easy and if you have a hatchback or SUV where the seats come out or go down flat thats all you need. Basically what you do is drape a moving blanket (or old comforter) over your bumper. Position the saw next to the bumper, and then tilt it up into your vehicle using your bumper/tailgate as your pivot point. Then slide the saw into your vehicle on the moving blanket. Piece of cake. 

If you want to get really really careful about moving it you can block the motor with some padding (wooden blocks/rolls of old bed sheets/whatever) and then lower it down onto that padding so that when the saw is on its back for transport the motor is supported in the downward direction. I have however moved my old unisaw twice without bothering to do this with no issues.

Posted

This is the PM66 I found. Any thoughts?

https://columbus.craigslist.org/tls/d/powermatic-66-table-saw/6448687262.html

I actually have an F150. So I assume it will not be an issue moving the saw then. The novice in me did not know if there was a risk of misalignment of something during transportation or loading. 

I found a unisaw that said it was pre 1940s but restored and works great. Someone said they prefer that age over newer unisaws anyways. How old is yours and what would be your opinion on that?

Posted
2 hours ago, nmazzino said:

Thank you for the advice. I cut a square line with a circular saw on the planks before running on the table saw. Needless to say I am also looking for a jointer/planer combo before doing anymore work

I did find a PM66 used but it is 3 hours away from me and I am not sure if I have means of transporting it yet. I am also nervous about transporting/setting up something like that causing issues with the saw. Is that something I should be worried about? 

Uhaul is your friend. Along with good straps. I have a Grizzly 1023 and it's doing exactly what I ask of it.

Posted

Another comment about cutting non-flat stock on a tablesaw.

IT IS DANGEROUS

No kidding, this can hurt you quickly. If the tablesaw must be used, ask Youtube about something called a straight-line ripping sled. It can hold your warped or twisted board so that you have straight and flat reference surfaces against the fence and table.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 36 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined