tlbrooks Posted January 7, 2018 Report Posted January 7, 2018 A couple years ago I was given cordless tool combo pack that has a drill, a small circular saw and a reciprocating saw. The person that gave it to me had never used it and It's probably 10 years old. Unfortunately it didn't have the battery charger with it and he doesn't know what ever happened to it. Does anyone have any idea what I can do to charge these? It's a 12 volt and I've already contacted the manufacturer and they've discontinued that model and no longer has any parts for it. I'd actually like to give it to my grandson but it's no good without a charger. Thanks for your help! Quote
..Kev Posted January 7, 2018 Report Posted January 7, 2018 Well, you could toss up the manufacturer info here to see is someone has it. You could also post to eBay or CL in your area to see if anyone has it. I would definitely surf eBay to see if you can find it. Quote
Bankstick Posted January 7, 2018 Report Posted January 7, 2018 Check www.ereplacementparts.com as they have a lot of odds and ends. I found the two blade wrenches for my Ryobi TS. Ryobi only had one and out of stock on the other. Quote
wdwerker Posted January 7, 2018 Report Posted January 7, 2018 Even your local Craigslist or similar site could be helpful. If I saw an add looking for some of the old chargers I have I would probably give them away cheap or for free. Maybe there is a place to post ads for stuff you want. Brand, age and type of battery matter a lot. If it uses Ni-Cad batteries you might see if better types were ever made for those tools. Chargers tend to be specific to the tool brand and type of battery. Quote
Tom King Posted January 7, 2018 Report Posted January 7, 2018 Being that old, the battery is probably no good anymore. Let us know the brand, and it would help. You can buy replacement batteries for almost anything, but by the time you buy a battery and charger, you're probably close to the cost of buying a whole new kit. I have some old Makita chargers. Quote
tlbrooks Posted January 8, 2018 Author Report Posted January 8, 2018 It's just one of the cheap Harbor Freight kits and I already had the same tools in Dewalt and Porter Cable. I just never had any use for it. I know it's just a cheap kit but thought my grandson could get some use out of it. Probably not worth the effort. Quote
wtnhighlander Posted January 8, 2018 Report Posted January 8, 2018 Mostly likely you can buy an entirely new kit from HM for less than you would spend trying to obtain a charger elsewhere. Certainly in time and effort. Quote
Jfitz Posted January 8, 2018 Report Posted January 8, 2018 sadly, I also have to say you're probably better off just buying a new kit. At some point, most of us will run into this situation - either a bad charger or a bad battery, and a ridiculous cost to replace and revive what otherwise is a workable tool. I'm also in this situation - I have a Ridgid oscillating tool (with some attachments) which I don't use a lot but is handy to have. Battery is indicated as 'defective' - and at $50 to replace (and the new one probably also defective soon), I'll probably just look at other items and toss this one. Quote
Marmotjr Posted January 8, 2018 Report Posted January 8, 2018 Given it's age and lineage, I'd assume it's a NiMh battery set. You could pick up a hobby battery charger and rig up a jig to charge the batteries, or even just clamp the leads to the correct terminal. With these there is little chance of an overcharge or other mishap. Undercharging and 'memory' can be an issue with these though. Quote
Marmotjr Posted January 8, 2018 Report Posted January 8, 2018 10 hours ago, Jfitz said: I'll probably just look at other items and toss this one. Check around for 3rd party after market batteries. I've gotten a few of the bigguns for my set at a very very reasonable rate. Check amazon, and read the reviews. It's also usually very affordable to find a battery store to replace the guts of a battery pack. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.