Popular Post Chris208 Posted September 27, 2018 Popular Post Report Posted September 27, 2018 My son had an incredible 2nd grade teacher. I made this for her. These are surprisingly easy to make once the process is clear. Hard maple with walnut, Purple Heart and santos mahogany ribbons. Quick fun project. 4 Quote
Coop Posted September 27, 2018 Report Posted September 27, 2018 Chris, I’ve made 6 of these with 2 not cutting the muster and I have to disagree, for me they were not “ surprisingly easy”. You did a great job my friend! Quote
Chris208 Posted September 27, 2018 Author Report Posted September 27, 2018 Thanks Coop, I’ve only made 1. Maybe beginners luck. I might make a few more for Christmas gifts, so we might find out. Where did you have problems with the two that weren’t up to snuff? Quote
Coop Posted September 27, 2018 Report Posted September 27, 2018 They were my first two and one had to do with the radius of my strips being too great and the other was that I wasn’t paying attention to the boards shifting left to right during glueup. The “ribbons” didn’t line up on the final like they should have. That board still serves me well around the BBQ cooker though! Quote
..Kev Posted September 27, 2018 Report Posted September 27, 2018 3 minutes ago, K Cooper said: They were my first two and one had to do with my arc being too great and the other was that I wasn’t paying attention to the boards shifting left to right during glueup. The “ribbons” didn’t line up on the final like they should have. That board still serves me well around the BBQ cooker though! Come for a visit Coop and I'll run you thru the process! they're fun to build! Quote
Coop Posted September 27, 2018 Report Posted September 27, 2018 2 minutes ago, ..Kev said: Come for a visit Coop and I'll run you thru the process! they're fun to build! Set another plate, I’m on my way! 1 Quote
treeslayer Posted September 27, 2018 Report Posted September 27, 2018 I agree with Kev, they are fun to build, probably did 35 of them by now, great gifts, although the first few were a challenge the process gets easier every time i build one Quote
treeslayer Posted September 27, 2018 Report Posted September 27, 2018 Here's one of my first ones that turned out correctly, Coop was a big help pointing out what could go wrong 2 Quote
Chestnut Posted September 27, 2018 Report Posted September 27, 2018 Never knew how to make these until now. I had to look it up. Seems like a fun process. Quote
Brendon_t Posted September 27, 2018 Report Posted September 27, 2018 OP, great board and a great gift. It is a fun process but one that needs attention paid or you end up like ol coop.. The tricks I've found to ensure they fit back together are; Ensure the strips you are inserting are a few thousandths thinner than what you remove from the board. Because of the curve, lining up is important. Having one side cut straight will give you a line to line up as you assemble Be ready to clamp in 3 directions. 1) Cauls to stay flat, 2) cross grain, which is most of it to get together 3) along the length, a clamp helps keep the two uneven pieces from slipping under clamp pressure and is often needed to close up gaps. 1 Quote
treeslayer Posted September 27, 2018 Report Posted September 27, 2018 Just to add to #3, I cut the corners at an angle so the clamp has a flat surface to keep the clamp from slipping off during assembly @Brendon_t is right on, these boards are a great gift and fun to make, thanks to @K Cooper for making the mistakes we learn from 1 Quote
Cliff Posted September 28, 2018 Report Posted September 28, 2018 I've been wanting to make these. I actually just made my first regular cutting boards last week. Thought I'd do easy stuff before fancy ribbons. Quote
Coop Posted September 28, 2018 Report Posted September 28, 2018 23 hours ago, treeslayer said: I agree with Kev, they are fun to build, probably did 35 of them by now, great gifts, although the first few were a challenge the process gets easier every time i build one If I get to be as old as you, I’ll probably never build 35 of them! But because of this thread, I think I’ll make a couple more. 1 Quote
treeslayer Posted September 28, 2018 Report Posted September 28, 2018 My beard hides my true age Coop, let’s just say there was only AM radio when I was in high school. I make those boards in between jobs or when I have some short scraps to use up. Quote
treeslayer Posted September 28, 2018 Report Posted September 28, 2018 12 hours ago, treeslayer said: Just to add to #3, I cut the corners at an angle so the clamp has a flat surface to keep the clamp from slipping off during assembly @Brendon_t is right on, these boards are a great gift and fun to make, thanks to @K Cooper for making the mistakes we learn from A sad face Coop? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.