jmaichel Posted March 20, 2011 Report Share Posted March 20, 2011 Edensaw, Port Townsend - http://www.edensaw.com/contact.asp Crosscut & Compton, seattle (maybe too far?) http://www.crosscuthardwoods.com/ PS. Welcome to the NW Handtool School com-padre! Thanks Marilyn! I have heard of edensaw but I think I have to take the ferry over to PT and not sure how I would get the wood back. I will look into it. Thanks again! James Quote Link to comment Share on other sites More sharing options...
SamV Posted March 21, 2011 Author Report Share Posted March 21, 2011 Thanks Marilyn! I have heard of edensaw but I think I have to take the ferry over to PT and not sure how I would get the wood back. I will look into it. Thanks again! James I highly reccomend Edensaw. I have been twice and each time I come home with some crazy deals. My VS drill press was on special, and I picked up some ebony pegs and a short of Hickory to make a nice bowsaw frame. I have always checked out and come away like I stole the place, but it all fits in my Jetta so there is plenty left. Viall8r Quote Link to comment Share on other sites More sharing options...
pens by david Posted January 28, 2013 Report Share Posted January 28, 2013 Hi, allDavid from Coeur d Alene,Idaho 1 Quote Link to comment Share on other sites More sharing options...
sgmdwk Posted May 12, 2013 Report Share Posted May 12, 2013 I'm in Tumwater, Wash. It seems the Pacific Northwest thread hasn't been busy for a long time. Dave K. Quote Link to comment Share on other sites More sharing options...
Nyles Posted May 12, 2013 Report Share Posted May 12, 2013 Hello. Hows it going Sgmdwk?. I havnt seen much action in this thread unfortunately. I am in Spokane, Wa. What type of woodworking do you do? Nyles Quote Link to comment Share on other sites More sharing options...
Jens Olson Posted June 14, 2013 Report Share Posted June 14, 2013 I surprise we have other people close to me. I am up in Sandpoint Idaho. Do all sorts of woodworking professional with my father. And starting Mid July will be doing a lot of fine CNC woodworking, a new super nice 5 axis CNC that we ordered. Hello. Hows it going Sgmdwk?. I havnt seen much action in this thread unfortunately. I am in Spokane, Wa. What type of woodworking do you do? Nyles Nyles, what type of wood working do you do? Quote Link to comment Share on other sites More sharing options...
Nyles Posted July 21, 2013 Report Share Posted July 21, 2013 Jens, I do alot of hybrid woodworking. Mostly small prokjects at the moment. Its been a few months since I even stepped into the shop honestly since i started school this summer... what was i thinking going to school over the summer? Anyways, welcome Jens. Always nice to see more pacific NW people. Nyles Quote Link to comment Share on other sites More sharing options...
wentzelwood Posted January 1, 2014 Report Share Posted January 1, 2014 Old forum new tricks. I've been a shipwright for 13 years and now delving into furniture. Living in Port Townsend has been a ideal location because of access to Edensaw. Not to mention all the great craftspeople in town, it really makes you bring your "A game", and their creating more with the excellent classes at PT School of Woodworking and NW School of Wooden Boatbuilding. With an upcoming Furniture Society Conference this year in PT, look for more from us. Quote Link to comment Share on other sites More sharing options...
..Kev Posted January 1, 2014 Report Share Posted January 1, 2014 I'm just North of Bellingham near the border. By the way, I love Edensaw, what a fantastic store! 1 Quote Link to comment Share on other sites More sharing options...
jmaichel Posted January 1, 2014 Report Share Posted January 1, 2014 I am in Oak Harbor, just a short ferry trip over the PT. I love PT, I always turn it into a family trip with my wife and little one. We go to Edensaw, walk around the downtown area and have lunch at Public House! I really want to take a class the PT School of Woodworking. Quote Link to comment Share on other sites More sharing options...
Mortoolsthanskill Posted January 2, 2014 Report Share Posted January 2, 2014 I'm just east of Redmond. My username is a pretty good description of my experience, so attending a school might be just the ticket. I've been to Crosscut and thought the prices were pretty high. Quote Link to comment Share on other sites More sharing options...
..Kev Posted January 2, 2014 Report Share Posted January 2, 2014 Welcome! Nice to see another not too far from me! Quote Link to comment Share on other sites More sharing options...
FlyinFish Posted October 31, 2014 Report Share Posted October 31, 2014 Figured I'd say "hi" over here as well. I just posted on the Intro Yourself board (). I'm specifically in the Greenwood/Phinney Ridge area of Seattle. Anyone else in the area have a favorite place to get wood where they'll mill down to thickness for you? I think Compton is the only place. I've got some projects that require 1/2" stock, and I'm going through the 'should I try to dive into buying a planer and jointer' phase. For now, I wouldn't mind just paying extra. Quote Link to comment Share on other sites More sharing options...
..Kev Posted October 31, 2014 Report Share Posted October 31, 2014 I'm about 85 miles North of you so, my options probably wouldn't work too well for you.. You might spend a few bucks on a lunch box planer. They tend to hold their value pretty well so, if you decide this isn't for you, you're not out much money.. Quote Link to comment Share on other sites More sharing options...
camrod67 Posted January 25, 2015 Report Share Posted January 25, 2015 Been awhile since someone posted on the thread. Newbie from Oregon checking in. Quote Link to comment Share on other sites More sharing options...
..Kev Posted January 25, 2015 Report Share Posted January 25, 2015 Welcome to the forums Camrod.. Quote Link to comment Share on other sites More sharing options...
Tom Crawford Posted January 25, 2015 Report Share Posted January 25, 2015 What part of Oregon? I'm 20 south west of Grants Pass. Quote Link to comment Share on other sites More sharing options...
bernieswanson Posted January 28, 2015 Report Share Posted January 28, 2015 I am here and near where I-90 intersects with I-405 in Bellevue. Have lots of tools, and lots to learn. Primarily built gift type items and any sales goes int my tool and wood fund. Saving $$ to upgrade my Delta 14 in bandsaw into a Grizzly 17 incher. Quote Link to comment Share on other sites More sharing options...
..Kev Posted January 28, 2015 Report Share Posted January 28, 2015 I'm about 100 miles North of you Bernie Quote Link to comment Share on other sites More sharing options...
MrMike27 Posted February 5, 2015 Report Share Posted February 5, 2015 Seems this Forum's not as popular as some of the others. Mike here from So-Cal specificaly Anaheim, not to far from Disneyland. I know there are more woodworkers out there, I used to work a Sears and got to talk to quite a few. That was some years back, but even back then they had computers. Quote Link to comment Share on other sites More sharing options...
Phil B Posted December 31, 2015 Report Share Posted December 31, 2015 Hi guys. I'm in Seattle (well, technically, Shoreline, WA but nobody's ever heard of it). Link to my intro: http://www.woodtalkonline.com/topic/20916-phil-from-seattle/ Quote Link to comment Share on other sites More sharing options...
..Kev Posted December 31, 2015 Report Share Posted December 31, 2015 4 minutes ago, Phil B said: Hi guys. I'm in Seattle (well, technically, Shoreline, WA but nobody's ever heard of it). Link to my intro: http://www.woodtalkonline.com/topic/20916-phil-from-seattle/ I'm just a bit North of Bellingham Phil.. Welcome aboard! Quote Link to comment Share on other sites More sharing options...
Strasberry Posted December 31, 2015 Report Share Posted December 31, 2015 On 1/1/2014 at 10:02 AM, TIODS said: I'm just North of Bellingham near the border. By the way, I love Edensaw, what a fantastic store! Have you been to the Grizzly warehouse in Bellingham? A true candy store! Quote Link to comment Share on other sites More sharing options...
..Kev Posted December 31, 2015 Report Share Posted December 31, 2015 Just now, Strasberry said: Have you been to the Grizzly warehouse in Bellingham? A true candy store! Frequently! Their tent sale sucks tho! Quote Link to comment Share on other sites More sharing options...
Strasberry Posted December 31, 2015 Report Share Posted December 31, 2015 Have you been to the Grizzly warehouse in Bellingham? A true candy store! Frequently! Their tent sale sucks tho! I've only been there once while visiting my daughter in Bellingham. Would like to go back. Sent from my XT907 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.