Recommended Posts

Posted

I have a few young friends (mid 20s) who occasionally use my shop.  One of them might use my shop unsupervised, and he rents an apartment in my home, so I asked him to sign a waiver.  The waiver said that he was responsible for learning how to use the tools safely.  I put that in there because I didn't trust myself remember everything, or even to know everything.

When he signed it, he asked if I had any suggestions on safety videos or resources.  I thought I did at one point, but I couldn't find them.

Have any of you been in a similar situation?  And recommendations to share.  I'm going to search this forum for "safety", and this thread can become a resource.

 

  • Like 1
  • Thanks 1
Posted

I remember seeing some great videos on TS kickback from Stumpy Nubs (James Hamilton).  

Just in general, he could do searches  for safe and proper operation of ______ machine.

  • Like 1
Posted

I'm putting together a document.  I'll probably post a link to it here, since it's already three pages.

So far most of what I've found has either been general, or table saw specific.  And old, lots of discussion of after market or DIY riving knives and splitters.

I consider the table saw to be about average dangerousness for my shop.  I think the band saw is among the safest, and the angle grinder is among the most dangerous.

Posted
On 7/24/2025 at 8:52 AM, Mark J said:

I would suggest you check with your homeowner's insurer to make sure you are covered.

I was just thinking that.  I was thinking the waiver would put anything on their insurance, not mine, but then I started thinking, "What if they claim that the tool was defective or not set up correctly" or worse yet "Your safety document was incomplete".

I'm not too concerned about the people or their families, but if their insurance company refuses to pay because they think my insurance company should pay, that's a problem.

My waiver says that it's their responsibility to educate themselves on safety, but if I turn around and provide a lengthy safety document....

  • Like 1
Posted

Your homeowners policy might not cover damage to your house (or personal injury) if you are using your house for business.  You might need a rider.

 

*Edited*

Posted
5 minutes ago, Beechwood Chip said:

waiver says that it's their responsibility to educate themselves on safety, but if I turn around and provide a lengthy safety document....

Good question.   

Posted
On 7/24/2025 at 9:04 AM, Mark J said:

Your homeowners policy might not cover you if you are using your house for business.  You might need a rider.

I'm not running a business, but if I let someone use my shop and they buy dinner and give me a few dollars for supplies, etc, then maybe I am?  

There must be other people who let people use their shop or borrow their tools.  Am I the only one who worries about all this?

By the way, the waiver and all this discussion happened before the router bit incident.  I'm mostly thinking about it now because I have a third person using my shop. 

Posted
On 7/24/2025 at 8:13 AM, Beechwood Chip said:

I'm not running a business, but if I let someone use my shop and they buy dinner and give me a few dollars for supplies, etc, then maybe I am?  

There must be other people who let people use their shop or borrow their tools.  Am I the only one who worries about all this?

By the way, the waiver and all this discussion happened before the router bit incident.  I'm mostly thinking about it now because I have a third person using my shop. 


You better ask your insurance, business or not.

  • Like 2
Posted
On 7/24/2025 at 9:13 AM, BillyJack said:

You better ask your insurance, business or not.

Waiver or no waiver, this is definitely something to check with your Insurer.

  • Like 1
Posted

I wouldn't let anyone work in my shop unattended unless I had worked with them to some extent to make sure they work safely and respectfully, regardless of any insurance matters.

 

  • Like 1
Posted
On 7/24/2025 at 9:17 PM, JohnG said:

I wouldn't let anyone work in my shop unattended unless I had worked with them to some extent to make sure they work safely and respectfully, regardless of any insurance matters.

 

There are three people who work in my shop.  One has spent four years in college working in "maker spaces".  At one of her jobs she was in charge of writing up the safety protocols, safety training, etc.  She only uses the shop with me, and I walk her her through every procedure before she does it, and supervise.

The second also only works with me with me in the shop.  She's very cautious and detail oriented, and remembers what she's told.  She's been working with me for four years, and I'm comfortable having her work without my direct supervision on tasks that she familiar with ("You rip the boards while I cross cut them at the miter saw."). She's also very good at stopping and asking for direction if she's at all unsure.

The third is more iffy.  He's worked in a metal shop (college course), and just completed an associates degree/certificate in auto mechanics.  So, he understands about shop safety.  He's likely to borrow a tool to do some DIY in his apartment.  Compared to the other two, he's a little more likely to try something if he thinks it's safe.  I'd say he's about as safe in the shop as I am, maybe a little less.

But, accidents happen no matter how careful, well trained, and experienced a person is.  And I'm just self taught without a ton of shop time.

  • Like 2
Posted
On 7/25/2025 at 8:21 AM, Mark J said:

Wow, you are very generous to do that!  

I agree. This is no doubt complicated from an insurance perspective and responsibility perspective, and I applaud you for being willing to take it on. I suspect there is a good chance these folks wouldn't get into woodworking without someone like you. I hope it continues to be a rewarding experience for everyone.

  • Like 2
Posted

First, full disclosure I am a CFP so my thoughts come from a planning risk assessment perspective.

I would be talking to your Insurance rep and an atty before even considering doing this. Once you have the facts you can make an informed decision and move forward. I can tell you for me personally even with a very large liability policy (wife has a pool) I would not let anyone use a power tool in my shop ever. While sad given the litigious environment we live in one negative event can change your financial future for ever its unfortunately, in my opinion, just not worth the risk.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 30 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined