Popular Post Ron Swanson Jr. Posted January 14 Popular Post Report Posted January 14 https://www.beck-fastening.com/en/innovation/lignoloc I stumbled across this this morning A nail gun that shoots... Wooden nails. 6 Quote
Popular Post drzaius Posted January 14 Popular Post Report Posted January 14 Can't remember the YouTube channel, but the guy was a boat builder and used one for those guns with either wood or polymer nails to tack things together when gluing up. No worries if he hit a nail with a cutting edge. 5 Quote
Popular Post pkinneb Posted January 14 Popular Post Report Posted January 14 I can absolutely see where that could be used in wooden boat building for sure. 4 Quote
fcschoenthal Posted January 14 Report Posted January 14 Interesting, but expensive at 25-50¢ each. I've heard of people using plastic nails as hold-downs on CNC machines. 1 Quote
Popular Post Botch Posted January 15 Popular Post Report Posted January 15 Might've been useful when they built this: This is at the south end of Kirtland AFB in Albquerque, where I was stationed '87-'92. It's built entirely of wood (held together with wooden pegs) to measure radar signatures of different USAF aircraft (no banana for scale, but there is a B-52 setting on it ). 6 Quote
legenddc Posted January 15 Report Posted January 15 Very cool. I'm sure the 66% less CO2 helps some builders meet sustainability goals in Europe where they're made. 1 Quote
Mark J Posted January 15 Report Posted January 15 12 hours ago, Botch said: Might've been useful when they built this: This is at the south end of Kirtland AFB in Albquerque, where I was stationed '87-'92. It's built entirely of wood (held together with wooden pegs) to measure radar signatures of different USAF aircraft (no banana for scale, but there is a B-52 setting on it ). That's amazing. I can't believe they got a B-52 up there, and getting it down must have been an even greater challenge. 1 Quote
Mark J Posted January 15 Report Posted January 15 The wood nail gun is interesting. I'm surprised they can drive the rather blunt tip w/o a pre-drilled hole. I wonder how you'd pull one out? Certainly not with a hammer claw. Probably you drill it out. 1 Quote
wtnhighlander Posted January 15 Report Posted January 15 I recall seeing a video explanation of how the wooden nail gun works, some time ago. IIRC, the friction heat from driving the nail in causes the lignin to sort of 'weld' itself together. I'm thinking these nails can't be extracted, only cut through or drilled out. Quote
Mark J Posted January 16 Report Posted January 16 I wonder if the nail ever breaks when fired, or doesn't go all the way in 2 Quote
Ron Swanson Jr. Posted January 16 Author Report Posted January 16 On 1/16/2026 at 6:48 AM, Mark J said: I wonder if the nail ever breaks when fired, or doesn't go all the way in I'm sure that probably happens sometimes. But the might of German engineering probably helps keep it to a minimum. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.