Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dave's Shop tour

Featured Replies

  • Replies 162
  • Views 42.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Thanks for the update, Dave. Tell the wife you'll build her a new car when the shop is fully kitted. Just got thru season 1 of "Rake" - some good wholesome Aussie telly and they made mention of

  • nateswoodworks
    nateswoodworks

    It's come a long ways and looks great. I don't think you ever have to worry about extension cords! Thanks for keeping us posted

  • Looking good, Dave! I just upgraded to T8's in my shop and wow, what a difference. Also put a T5 strip above the workbench...that thing may actually be TOO bright. LOL Love your wood floors. I k

Posted Images

Dave, having a 14" Rikon, that has good resaw capacity (12"), I would still recommend going bigger. The small table size is limiting and with your tooling direction, you will probably want that extra bit of table. Personally, I could do without the tablesaw, but that isn't to say I don't love mine as it is set up.

(null)

If I were to start again, I would buy a 17" bandsaw, and scrap the tablesaw. But I am Ina very small apace and use hand tools for a lot of my woodworking.

  • 2 weeks later...

Everything looks like it's coming along very nicely thanks for all the updates. As for the tablesaw I suppose I could do with out but that does not mean I would want to do with out! How long till you think you will be done and ready to play?

Here is a short clip to give a better idea of my thoughts at this stage.

http://www.youtube.com/watch?v=cFfO-uwMMS4&feature=plcp

I very much like your table and thoughts on track saw setup, Dave. I have been fiddling around with a smaller version (76/152cm) as a power tool bench and am focused right now on how best to square the track and wood for repeat cuts and routing operations. You have inspired me to take another crack at it, though I am deeply envious of your bench size!!

  • Author

Frank, have a look at Ron Paulk in youtube for ideas on using the table for repeat panel docking.

  • Author

Nate, the whole experience is playing. To answer your question about six months from now. Middle of winter in Australia right now so not much desire to venture into the cold.

Frank, have a look at Ron Paulk in youtube for ideas on using the table for repeat panel docking.

Will do. Thanks, mate!

  • 1 month later...

Hey Dave, We need an update. You must be busy playing with the new tools!

  • Author

Hi everyone. I have been very busy in the retail sector which has been both great fun and also very educational. I have kept my ears open and absorbing a heap of knowledge from both young and old in regard to joinery and workshop design. Festool Australia has taken me under their wing and invited me to various events to assist in manning booths with their own rep. This is of course able to be done due to the people at Carbatec where I work asking me to be their ambassador at these events. Everyone is a winner.

Regarding my workshop, things have stalled until it becomes warmer and I can afford to buy some more toys. Unfortunately my wife's 23 year old car decided to die, so finances were diverted to buying a new vehicle. I am thinking this could be a perfect opportunity to actually buy some plywood and make a few items for the shop and also for my home. Feels a bit strange not just buying toys!

Thanks for the update, Dave. Tell the wife you'll build her a new car when the shop is fully kitted.

Just got thru season 1 of "Rake" - some good wholesome Aussie telly and they made mention of the Blue Mountains in one episode. Love the new avatar/pic.

that's a nice looking shop, especially the dance-floor like finish on the plywood. Insert your own pun here about doing a jig. get it? dance floor, jigs... oh nevermind. :)

  • Author

Yes, I get it..... :-)

I have been adjusting the layout of the shop so I am thankful that I haven't run any ducting for the dusty.

  • 3 months later...
  • Author

Here is a video clip of the outfeed table, taken with my phone so not the best quality. The noise in the background is Barry walking around behind me...Barry of course being my dog.

Hey Dave and Barry

The new saw and OFT look great , I like the new shop space . You have tons of room now , miss you in chat mate . Take care .

Jerry

  • Author

I am doing a little catch up posting as you may see, lol. This video shows my current shop vac solution. Some of you may remember that I was experimenting with a dry cyclone and then a wet cyclone. It worked brilliantly but the maintenance was too much trouble, emptying the wet cyclone container and drying it was too much trouble. Mold would end up being an issue. I have since followed onedia's advise and fitted 2 of their small cyclones as prefilters to my shop vac. I am impressed because I have around 12 metres of 2 inch hose connected to the unit and the draw is plenty good enough for my sanders, tracksaw, router and also for vacuuming the shop floor.

http://www.youtube.com/watch?v=vYtLE27PPLQ

  • Author

I am leaning towards getting a jointer mainly for removing twist and also doing some rebating. I was all set to get an 8 inch with spiral head. I am now thinking a 6 inch longbed with 3 standard 18% tungsten blades would be all I need. It may be used once a month. I have no neighbours in earshot. I do not resaw timber. If on the odd occasion I did try to clean up a few feet of sawn material I guess I could pass in 2 directions and then run through my 13 inch spiral head thicknesser.

Any thoughts?

http://www.carbatec.com.au/carba-tec-6-long-bed-jointer_c2360

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.