Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop video

Featured Replies

Really!? is that necessary?

What you mean by this. Just giving off a little humor. something you young folk dont understand.

  • Replies 60
  • Views 14.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • PaulMarcel
    PaulMarcel

    I haven't watched it yet, so no suggestions there, but this post gets my vote for funniest admission: Figured out after the listening to the voice over I forgot my darn teeth.

  • EdgewaterWW
    EdgewaterWW

    Great video and shop. I would think this will be your hardest video to make talking about the shop, talking about a project or technique should be easy for You. Good luck   Also My 2 cents is more e

  • jhl.verona
    jhl.verona

    Good start Don, thanks for sharing. First the good news - the lighting is perfect, and the length of video is perfect, and the humour is nicely balanced, 'towel holder', 'sagging hose' etc. Just enoug

What you mean by this. Just giving off a little humor. something you young folk dont understand.

I guess I must be to young to understand.... Just making sure no one disrespects my boy Don... ;)

I guess I must be to young to understand.... Just making sure no one disrespects my boy Don... ;)

count me as an old fart, too! Cracking 50 in a couple months!

You guys make me feel so young at 22. Am I the youngest on here?

I'm pretty sure you're not. 

I guess I must be to young to understand.... Just making sure no one disrespects my boy Don... ;)

 

Jack, from what I have been reading around this froum he need no help. :P :P :) But I hear loud and clear! Meant no disrespect. Very sorry :(

So as far as critiquing the video is concerned, I have only two areas to mention.

 

First, it seems you're using some editing software to piece the videos together and to do audio overdub.  If that's the case, you should also be able to edit out wobble like where you start the camera up for the second bit of video after your intro.

 

Second, I agree with the poster who noticed the hum in the background of the audio throughout your commentary.  It's understandable if you're in the shop and working at the same time.  If you're doing an overdub, pick a quieter environment to do it in.  It should be crisp and clear.

 

On the positive side, for not being scripted your commentary is well executed and flows very well.  If you hadn't mentioned the lack of choppers, I'd not even have noticed or have chalked it up to some local accent or inflection.  I'm not going to be as picky to say that some comments were unnecessary or controversial.  I thought they were more a matter of giving a perspective of the type of woodworking you like to do.

 

As far as comments about the shop go, I realize that wasn't what was asked for in your original post.  I will have to say I'm green with envy.  I don't care so much about the brand but there are at least three tools I'd love to have or upgrade to in my shop.  I did notice that a couple of your tools were facing into or out of corners, specifically the jointer an planer, and wonder if that doesn't create some feed length issues for you.  Perhaps you just don't work with pieces that are that long.

 

Nice shop, unreasonably clean, and a good start into the world of video making.  Anyone who has seen the few I've got on YouTube would know I shouldn't criticize!

  • Author

So as far as critiquing the video is concerned, I have only two areas to mention.

First, it seems you're using some editing software to piece the videos together and to do audio overdub. If that's the case, you should also be able to edit out wobble like where you start the camera up for the second bit of video after your intro.

Second, I agree with the poster who noticed the hum in the background of the audio throughout your commentary. It's understandable if you're in the shop and working at the same time. If you're doing an overdub, pick a quieter environment to do it in. It should be crisp and clear.

On the positive side, for not being scripted your commentary is well executed and flows very well. If you hadn't mentioned the lack of choppers, I'd not even have noticed or have chalked it up to some local accent or inflection. I'm not going to be as picky to say that some comments were unnecessary or controversial. I thought they were more a matter of giving a perspective of the type of woodworking you like to do.

As far as comments about the shop go, I realize that wasn't what was asked for in your original post. I will have to say I'm green with envy. I don't care so much about the brand but there are at least three tools I'd love to have or upgrade to in my shop. I did notice that a couple of your tools were facing into or out of corners, specifically the jointer an planer, and wonder if that doesn't create some feed length issues for you. Perhaps you just don't work with pieces that are that long.

Nice shop, unreasonably clean, and a good start into the world of video making. Anyone who has seen the few I've got on YouTube would know I shouldn't criticize!

Thank you. There is shy of 8ft usable for the jointer and planer, has worked pretty good for what I do.

Turned out the wood I was trying to bend was kiln dried.  No matter how loud I grunted it wouldn't bend.  I now have a nice stack of air dried oak that I intend to try some stuff with ... as soon as I sort out some of the things I have yet to finish ...

while doing some research on bending i know that oak does bends well.  i made a bent wood box for the 1ft challength and the sides were white oak.  

 

Byrdie you can get a wall paper steamer from a box store for 50 bucks while woodcraft sells it for 70. i made a few head bands but most of my blanks broke and dont have the tools to cut the wood down and havent talked to my lumber supplyer since i moved since i havent built anything big since last year.   so i dont have any air dried wood so havent made the number of headbands that i would like too. 

Don't need a wallpaper steamer.  The steamer part of my operation works just fine.  Wrong choice of wood was my problem.

count me as an old fart, too! Cracking 50 in a couple months!

Vic!!!! Only 50??? :lol: :lol: :lol: Hey, at 53 I've finally begun to learn things like, how to drive pretty much in the right lane and still make time and avoid all my law enforcement friends. Don's a "neaty"....I'm a messy. He's prob a one project at a time guy.  I'm a 4. Too neaty and you're too tight...you obsess over crazy things that messies laugh at....you need to loosen up some...messies like me loose no sleep over the shop that's not clean enough.  "ITS A SHOP...NOT A CHURCH!!" :rolleyes: BUT.....I spend half my life looking for things and that I hate. Good first video.  Way to put yourself out there.  My theme in life is don't get old and stuck in your ways.  Always try new things!

Great setup. I wish I could have that 12" jointer and the drum sander and ... everything.

 

Ok im trying to learn how to make videos. Take a look, let me know how bad it is and where the quality could be improved. If its bad let me know Im pretty thick skinned. Id like to learn to do video's but dont want to do just bad one. Figured out after the listening to the voice over I forgot my darn teeth.

 

http://www.youtube.com/watch?v=FEgE0O6F-VE

  • Author

Any thoughts on a second video?

 

Im going to do some chairs and tables eventually. I started a chair video and sat down with the wife to go through it and she had some pretty valid points. I really dont do alot of things like you see done on the internet. For example I dont pattern cut like most on a chair leg. Usually you would trim close to a line on the bandsaw then template router. I dont trim on the bandsaw I use a 5.5" diameter head and bearing and turn it all into shavings real quick. I think Im going to start over and order some router bits since I really only own two cheap straight bits. I think it would be best to show how to do it with tooling that most people already own, maybe show it with the bigger stuff and then at least show the setup with smaller tooling.

There are a few bugs I need to work out as there are some things I really have no experience doing with smaller tools. In fact I ordered a Jet tablesaw tenon jig that is arriving today. This will be a first for me, I usually use a pair of 6" diameter heads and cut tenons in one pass as a cope. For little stuff I use a 4" Amana dado with 3/4" bore on the shaper as a cope cut. I just started working on the bugs but will get some video shot fairly soon.

Im going to do some chairs and tables eventually. I started a chair video and sat down with the wife to go through it and she had some pretty valid points. I really dont do alot of things like you see done on the internet. For example I dont pattern cut like most on a chair leg. Usually you would trim close to a line on the bandsaw then template router. I dont trim on the bandsaw I use a 5.5" diameter head and bearing and turn it all into shavings real quick. I think Im going to start over and order some router bits since I really only own two cheap straight bits. I think it would be best to show how to do it with tooling that most people already own, maybe show it with the bigger stuff and then at least show the setup with smaller tooling.

There are a few bugs I need to work out as there are some things I really have no experience doing with smaller tools. In fact I ordered a Jet tablesaw tenon jig that is arriving today. This will be a first for me, I usually use a pair of 6" diameter heads and cut tenons in one pass as a cope. For little stuff I use a 4" Amana dado with 3/4" bore on the shaper as a cope cut. I just started working on the bugs but will get some video shot fairly soon.

I look forward to it.

Maybe some intermittent updates as well? Not just a finished video at the end but 2 or 3 simply edited 1 minutes videos showing progress.

Im going to do some chairs and tables eventually. I started a chair video and sat down with the wife to go through it and she had some pretty valid points. I really dont do alot of things like you see done on the internet. For example I dont pattern cut like most on a chair leg. Usually you would trim close to a line on the bandsaw then template router. I dont trim on the bandsaw I use a 5.5" diameter head and bearing and turn it all into shavings real quick. I think Im going to start over and order some router bits since I really only own two cheap straight bits. I think it would be best to show how to do it with tooling that most people already own, maybe show it with the bigger stuff and then at least show the setup with smaller tooling.

There are a few bugs I need to work out as there are some things I really have no experience doing with smaller tools. In fact I ordered a Jet tablesaw tenon jig that is arriving today. This will be a first for me, I usually use a pair of 6" diameter heads and cut tenons in one pass as a cope. For little stuff I use a 4" Amana dado with 3/4" bore on the shaper as a cope cut. I just started working on the bugs but will get some video shot fairly soon.

 

Since you're doing a few chairs, I'd love to see at least one done the way you'd do it.  Sure I don't have the tooling for it, but would like to see how it would be done that way.  I've already seen how it's done with a pattern bit :)

Hell yeah..... I agree with Paul.....show us all how you would do it in the Pro world! I have see how other's do it. Show us your way! :D  To hell with bug's. Just do it, come on! :)

 

Why not show us how you handle a spray gun. Quick video on your spray booth or paint locker? I would like to see that. :)

 

-Ace-

  • Author

Hell yeah..... I agree with Paul.....show us all how you would do it in the Pro world! I have see how other's do it. Show us your way! :D  To hell with bug's. Just do it, come on! :)

 

Why not show us how you handle a spray gun. Quick video on your spray booth or paint locker? I would like to see that. :)

 

-Ace-

 

Ill show both methods. I closed the deal on my warehouse shop a few weeks ago, so as I stated earlier what you see is what you get. Im  just spraying in my shop like everyone else.  I really dont know about pro world maybe old school. 

Id like to make what videos I do make useful not just youtube blurbs that are useless.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.