Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop video

Featured Replies

Ok im trying to learn how to make videos. Take a look, let me know how bad it is and where the quality could be improved. If its bad let me know Im pretty thick skinned. Id like to learn to do video's but dont want to do just bad one. Figured out after the listening to the voice over I forgot my darn teeth.

 

http://www.youtube.com/watch?v=FEgE0O6F-VE

  • Replies 60
  • Views 14.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • PaulMarcel
    PaulMarcel

    I haven't watched it yet, so no suggestions there, but this post gets my vote for funniest admission: Figured out after the listening to the voice over I forgot my darn teeth.

  • EdgewaterWW
    EdgewaterWW

    Great video and shop. I would think this will be your hardest video to make talking about the shop, talking about a project or technique should be easy for You. Good luck   Also My 2 cents is more e

  • jhl.verona
    jhl.verona

    Good start Don, thanks for sharing. First the good news - the lighting is perfect, and the length of video is perfect, and the humour is nicely balanced, 'towel holder', 'sagging hose' etc. Just enoug

Ok im trying to learn how to make videos. Take a look, let me know how bad it is and where the quality could be improved. If its bad let me know Im pretty thick skinned. Id like to learn to do video's but dont want to do just bad one. Figured out after the listening to the voice over I forgot my darn teeth.

 

http://www.youtube.com/watch?v=FEgE0O6F-VE

 

 

I haven't watched it yet, so no suggestions there, but this post gets my vote for funniest admission: Figured out after the listening to the voice over I forgot my darn teeth.

You made one statement that I disagree with....."12 inch joiner, nothin' special".....That would be fabulous special for me. Nice video and nice shop, PB. Ya done good.

Nice set up.  Question: What type of stuff do you build.  You reference the shaper as the work horse of the shop.  I imagine that for miles and miles of custom trim.  LOVE the 24" bandsaw!!  Someday!

Making people like myself jealous ;) Just like Marc's shop, filled up with Powermatic beauties.

 

Comment I can give you is you narrated your speech very well. You are very easy to understand and follow.

one real comment is this a shop or a tool storage with dust collection hooked up?  never seen a shop so clean without little projects here and there, garbage cans, finish stand,  scrap wood waiting for a project,  nick nacks, a little clutter ect...... basicly as a viewer i feel like its not a shop where your passion is but rather a place that you spent tools on to store.  feel like you need to add some of your own personality to the room.  my shop has a yellow monkey with a giant cigaret hanging out of its mouth in the corner and a sad monster coffee mug holding paint brushes,  there are bits and pieces of half finished projects, shop made jigs, couple boxes of materials that are half thought ideas ect......

 

did you just move your tools in and hook up your hoses or have you been in for a while it feels like its a brand new space without any kind personality.  not saying you have to fill it with clutter but i as a viewer need to connect with you as a person in order to feel like im a part of your shop.  i learn better with people i relate too.

Now to be fair, he said the envy inducing 20" planer was nothing special, not the severe envy inducing 12" jointer.

 

Having a small shop, it foreign to me to see a shop where there isn't stuff stuck in every crevice.  I might have my shop sometimes looking that clean if there were space around things to actually be able to clean without having to move things and crawl around.  So I tend to agree the place looks kind of lifeless compared to what I'm used to.

 

But we're supposed to be critiquing the video not the shop, so there's a pretty annoying noise in the background of the audio.  Otherwise I can't see anything wrong with it as far as a shop tour goes.

Great video and shop. I would think this will be your hardest video to make talking about the shop, talking about a project or technique should be easy for You. Good luck

 

Also My 2 cents is more excitement in your voice, not boasting but upbeat, like Marc sounds upbeat talking about Glue (haha)

 

I was just joking about the 2 cents, I need it I'm saving for a PM tape measure.

PB it's very good. If I am being harsh I agree with Doug, I like people who seem fully engaged with a hint of passion. As Doug said no need to boast but good to let us know the lowdown on your equipment, it's nothing special to you perhaps but I have seen quite large pro joinery shops with much worse equipment.

I feel differently about the tidy shop. I like your approach. I don't like bit's everywhere, if I want to learn I don't want to be distracted by other stuff. I think your tidy shop approach is right on the money. I have seen videos where someone is huddled at the end or a bench surrounded by a pile of tools,  scraps, dirt.......for me that's not good.

For me, no need to say you don't like hand tools. Anything you don't like perhaps leave unsaid, promote what you do like. People can become unintentionally divisive with comments that are meant with the best of intent (see here, bottom paragraph) .

Your voice is fine really it's fine. Sadly I think we all hate how we sound on a recording  :)

For my benefit what did you film it on? Did you use a mic? Will we see your face?

Already looking forward to more.

Good start Don, thanks for sharing. First the good news - the lighting is perfect, and the length of video is perfect, and the humour is nicely balanced, 'towel holder', 'sagging hose' etc. Just enough for the native speakers, not too much for non native speakers.

 

I have to agree with GS - no need to mention hand tools if you don't use them. It avoids controversy and above all doesn't side track. Positive wording of the script helps incredibly - in discussions I use a simple example; some people finish with 'do you understand?' others with 'did I make myself clear?', the first indicates that the student is at fault, the second the teacher. I know which I prefer when I'm learning :)

 

Don't start with too long a preamble, or if you do then film yourself speaking, a still image isn't that interesting. I think the 7 second rule for web pages applies to videos too - I'll watch maybe 10-20 seconds before moving on.

 

Also agree with GS and Doug, drink the coffee first! It sounded a little funereal, you'll have to change tone occasionally, try to sound a little more enthusiastic.

 

Those machines may be 'middle of the road' to you, after such a rich professional career, but most viewers won't know your background, and (as you've seen from the comments here) are certainly much more enthusiastic about them. Try to put yourself in their shoes, and add a quick positive comment '12" jointer, bigger than most, but can handle all the cabinet stock jointing I do now', something like that...

 

Instead of walking around, wobble wobble, perhaps some panning/zooming shots on the tripod?

 

Last but not least - excellent voice over, no hesitations, no "er's and ah's" - how many times did it take to get that right?

 

I think we're all secretly interested in doing our own videos (at least I am one day) so I'm finding this thread and the others you started about videos very interesting. Keep it up!

 

John

Good vid, nice shop, I understood everything said.  Count me in as one of the jealous people in regards to the tools...lol

Haven't watched yet, but I plan on it later.

 

One thing that I was taught out of the speech class is to prepare your speech like it's a conversation with a friend, not something you read.  If you are going to be in the shot, you need to look at the camera and treat it like it's a viewer.  (I have to master this technique myself; I tend to look at a point above the lens or anywhere but directly at the lens... makes me uncomfortable to look directly at the lens for some reason.)

  • Author

I haven't watched it yet, so no suggestions there, but this post gets my vote for funniest admission: Figured out after the listening to the voice over I forgot my darn teeth.

 

That part is actually true there are a few word you can really hear it. :)

 

Making people like myself jealous ;) Just like Marc's shop, filled up with Powermatic beauties.

 

Comment I can give you is you narrated your speech very well. You are very easy to understand and follow.

 

Thank you

 

one real comment is this a shop or a tool storage with dust collection hooked up?  

 

did you just move your tools in and hook up your hoses or have you been in for a while it feels like its a brand new space without any kind personality.  not saying you have to fill it with clutter but i as a viewer need to connect with you as a person in order to feel like im a part of your shop.  i learn better with people i relate too.

Duck, 

Clutter collects dust. I find it alot easier to work in a clean organized shop. Can guarantee you that the shop has seen more use in the year and a half that its been stand than many have seen in a life time. 

 

Now to be fair, he said the envy inducing 20" planer was nothing special, not the severe envy inducing 12" jointer.

 

Having a small shop, it foreign to me to see a shop where there isn't stuff stuck in every crevice.  I might have my shop sometimes looking that clean if there were space around things to actually be able to clean without having to move things and crawl around.  So I tend to agree the place looks kind of lifeless compared to what I'm used to.

 

But we're supposed to be critiquing the video not the shop, so there's a pretty annoying noise in the background of the audio.  Otherwise I can't see anything wrong with it as far as a shop tour goes.

I dont hear the background noise but am hard of hearing.

 

Great video and shop. I would think this will be your hardest video to make talking about the shop, talking about a project or technique should be easy for You. Good luck

 

Also My 2 cents is more excitement in your voice, not boasting but upbeat, like Marc sounds upbeat talking about Glue (haha)

 

I was just joking about the 2 cents, I need it I'm saving for a PM tape measure.

 I agree Im pretty monotone in general.

 

PB it's very good.  .

Your voice is fine really it's fine. Sadly I think we all hate how we sound on a recording  :)

For my benefit what did you film it on? Did you use a mic? Will we see your face?

Already looking forward to more.

Thank you, I didnt use a mic, well sort of. I recorded it while talking and was very boring just listing off tools no descriptive. I seperated the video from the audio and deleted the origonal and just sat at my deck and did a voice over using the internal mic on my macbook. I filmed it with a panasonic lx5 little digital camera.

 

Good start Don, thanks for sharing. First the good news - the lighting is perfect, and the length of video is perfect, and the humour is nicely balanced, 'towel holder', 'sagging hose' etc. Just enough for the native speakers, not too much for non native speakers.

 

I have to agree with GS - no need to mention hand tools if you don't use them. It avoids controversy and above all doesn't side track. Positive wording of the script helps incredibly - in discussions I use a simple example; some people finish with 'do you understand?' others with 'did I make myself clear?', the first indicates that the student is at fault, the second the teacher. I know which I prefer when I'm learning :)

 

Don't start with too long a preamble, or if you do then film yourself speaking, a still image isn't that interesting. I think the 7 second rule for web pages applies to videos too - I'll watch maybe 10-20 seconds before moving on.

 

Also agree with GS and Doug, drink the coffee first! It sounded a little funereal, you'll have to change tone occasionally, try to sound a little more enthusiastic.

 

Those machines may be 'middle of the road' to you, after such a rich professional career, but most viewers won't know your background, and (as you've seen from the comments here) are certainly much more enthusiastic about them. Try to put yourself in their shoes, and add a quick positive comment '12" jointer, bigger than most, but can handle all the cabinet stock jointing I do now', something like that...

 

Instead of walking around, wobble wobble, perhaps some panning/zooming shots on the tripod?

 

Last but not least - excellent voice over, no hesitations, no "er's and ah's" - how many times did it take to get that right?

 

I think we're all secretly interested in doing our own videos (at least I am one day) so I'm finding this thread and the others you started about videos very interesting. Keep it up!

 

John

John,

Thanks for the honest opinion. I did the voice over in one try so maybe could have been alot better if it was scripted. I am very mono tone I guess I could fake it but dont want to come off sounding like a fool. I agree with the hand tool thing. Really I just added it because folks tend to give me grief about the shop being to clean and lack of hand tools hanging all over the walls. Gonna have to get Duck a smoking money. :)

  • Author

Nice set up.  Question: What type of stuff do you build.  You reference the shaper as the work horse of the shop.  I imagine that for miles and miles of custom trim.  LOVE the 24" bandsaw!!  Someday!

 

Vic, 

I do cabinets, chairs and tables for the most part. The shaper is really resal not for trim, cheaper to just buy trim from a millworks place, thats a job for a moulder. Shaper is just a router table on steroids but it cant do blind cuts like dado's far from the edge. They do perform petter than a router in general for pretty much every operation. The motors are reversible so can change direction to avoit tearout. Add the power feed they will safely climb cut a raised panel in a single pass. They also offer full face profiling. For example cabinet door sticking I run a back fence and the shaper cuts the stick profile and adjust the stock size to final width at the same time. Shapers also cut many times smoother than a router. Im sure youve seen the William Ng flush trim bits they are good sized to help with a cleaner cut. A shaper will take cutter many times that diameter and come in varieties like standard carbide to spiral 4" in diameter. Cutting patterns on a shaper with a cutter and bearing is much cleaner than any router.  Really this is where the whole spirals for jointers and planers got its start. Throw on a couple start cutters and you can mass produce tenons. Just to many uses to list. I personally thing everyone needs a shaper at least a small one.

I dont have sound on my computer but a nice shopbut do you actually do any work? Way to clean of a shop. :) Can you show us what your working on now or some of your customer work?

  • Author

I dont have sound on my computer but a nice shopbut do you actually do any work? Way to clean of a shop. :) Can you show us what your working on now or some of your customer work?

 

Im not working on anything at the moment, thus why I have time to play with videos. Really the only thing Ive done in the past month is some dirt cheap aquarium furniture. 

 

I'd like to do a video series on this table as soon as I can figure out the how to's of recording.

 

Dirt cheap aquarium furniture for a local fish shop. Ive done two dozen of these i the last month and a few other ugly red oak versions.  Really pretty boring.

Im not working on anything at the moment, thus why I have time to play with videos. Really the only thing Ive done in the past month is some dirt cheap aquarium furniture. 

 

I'd like to do a video series on this table as soon as I can figure out the how to's of recording.

attachicon.gif002 (Medium).JPG

 

Dirt cheap aquarium furniture for a local fish shop. Ive done two dozen of these i the last month and a few other ugly red oak versions.  Really pretty boring.

attachicon.gifIMG_0116.jpg

 

Thought you had a lot going on being a pro and all. would really like for you to show us your pro shop if thise insnt your pro shop. are you going to sell your videos you make. too many out there say they are pros and really not pros and the videos are bad. I bet yours will be fine you know what your are talking about.

 

I think showing us your pro ways give us better insight how thing are really done and not becauses of tool manufactures pushing stuff at us.

  • Author

Thought you had a lot going on being a pro and all. would really like for you to show us your pro shop if thise insnt your pro shop. are you going to sell your videos you make. too many out there say they are pros and really not pros and the videos are bad. I bet yours will be fine you know what your are talking about.

 

I think showing us your pro ways give us better insight how thing are really done and not becauses of tool manufactures pushing stuff at us.

Mike,

I'm done. Officially retired what you see is what you get. No I wouldn't make videos for money, just a new thing to keep me busy. They may be terrible but I'm willing to give it a shot.

If I paid for it I'd critique maybe. It was free, that makes if perfect. Those who take your tidiness as cold are just jealous that they (like me) cannot escape clutter (tongue firmly in cheek.) Telling me about your hand tools and shop in this way is a Huge insight into your personality and need not be avoided during an introduction to you and your shop. Thank you for putting yourself out there.

Do you have an idea of what type of videos you are going to produce? Just basic blog type videos, thorough project run downs, or updates/reviews/etc?

 

Maybe, all of the above?

 

I love woodworking videos, no matter what they are about. I'll tell you what, nothing would get me more excited then to see a video of your process of squaring up a piece of lumber. Yeah, I know Marc has one (coincidentally this is the one I learned from), but it doesn't hurt to watch another.

Mike,

I'm done. Officially retired what you see is what you get. No I wouldn't make videos for money, just a new thing to keep me busy. They may be terrible but I'm willing to give it a shot.

 

 

Retired??? from watching your comments thought you were full time pro not an old fart, who is doing all your jobs?

Well done Donny Boy......when ya gonna start making some saw dust? Can't wait for more action! This should be good! You sounded good! Even with the old choppers missing... was hardly noticible!  :D :D :D

 

-Ace-

  • Author

Retired??? from watching your comments thought you were full time pro not an old fart, who is doing all your jobs?

I quit last year. I only do enough to stay busy. I'm not old 53 is young.

Retired??? from watching your comments thought you were full time pro not an old fart, who is doing all your jobs?

Really!? is that necessary?

nice looking shop, a bit to clean for me... kinda looks like it doesnt get used enough, mine is clean but not that clean. but nice looking shop either way....

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.