Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A Trilogy of Boxes

Featured Replies

I've been entertaining myself recently making a few small boxes from oddments of timber.  The first is a little box in Brazilian Walnut:

 

DSC_0043_zps36f89041.jpg

 

DSC_0046_zpse9104d0b.jpg

 

...with 50p piece shown for a size comparison.  I then went onto a box with a lift-off lid, made in English Walnut and given to my daughter as a birthday present:

 

DSC_0003-9_zpse9c94f9c.jpg

 

DSC_0005-17_zpse7d089e6.jpg

 

and with the lid off, showing the rosewood lining:

 

DSC_0004-17_zps95b2449f.jpg

 

 

The last little box has a tale to tell.  Last year I paid a visit to Japan and went to see a Japanese swordsmith, Masahira Fujiyasu-san who, when he realised at the end of my visit that I was a bit of a wood mangler :ph34r: , gave me a small billet of an unknown timber.  It's very hard, very heavy, brittle and with a distinct lemon/peppery smell when worked.

 

DSC_0001-22_zps6754fef8.jpg

 

DSC_0002-18_zpsb9acd31b.jpg

 

 

...with the final shot showing:

 

DSC_0003-9_zps6f3e6804.jpg

 

...a corner detail with the lid slightly proud of the front and sides - Rob

 

Very nice, Rob.  I think the first one is my favorite.  The third one looks like it could be bocote.

I like all of them.  The joinery looks flawless.  English Walnut is a lot more blonde than anything around here, I really like it.   I have no clue on the wood for the last box.

Did he say if the wood on #3 was native to Japan?  Looking online, I think it might be Japanese Persimmon. It's certainly hard, and looks like it could be a match. I don't see any notes about odor, though.

 

Could be also be camphor, but I wouldn't describe camphor as smelling like lemon/pepper. Distant third is "urushi" - aka Japanese Laquer Tree or Japanese Sumac (often used for urushiol extraction).

  • Author

Thanks for the nice words about the boxes.  The English Walnut used here was in fact very light as it's normally much darker, but I thought the oddment I had would make a decent box, especially the bookmatched grain on the lid.  I have no idea if the wood in the third box was a native of Japan, but I assume it was.  When I was given the billet, it was covered in urushi lacquer so obviously came from something that had been dismantled.  The smell isn't overpowering but is quite distinctive...definitely slightly peppery with a hint of lemon.  i'll have to look up bocote and see what it's like - rob 

This is some beautiful work!!!  I especially like the first box.  Very simple and elegant.  

Is there a name for this type of swivel lid?  I've never seen it before and would love to do a search to see how it's made.  

Is it just a metal pin that's glued into the frame and then fits into the lid that the lid then swivels on (if that makes sense)?  

Obviously there would also need to be a slight gap between the lid and the back of the box so that it has room to swivel open.

 

Thanks!

 

-EG

  • Author

This is some beautiful work!!!  I especially like the first box.  Very simple and elegant.  

Is there a name for this type of swivel lid?  I've never seen it before and would love to do a search to see how it's made.  

Is it just a metal pin that's glued into the frame and then fits into the lid that the lid then swivels on (if that makes sense)?  

Obviously there would also need to be a slight gap between the lid and the back of the box so that it has room to swivel open.

 

Thanks!

 

-EG

I don't know what the correct name is, 'pivot pin hinge' maybe?  The sides and lid need to be drilled 'in situ' (fairly tight fit by the way) and the pins (one each side, about 20mm long) are left over size for easy removal with a pair of pliers. The back of the lid can then be relieved and test fitted until it opens smoothly.  For the final fit, the pins are cut to the right length, the ends polished and then pin punched under the surface...once they're in for the final time, they're not coming out again! - Rob

I don't know what the correct name is, 'pivot pin hinge' maybe?  The sides and lid need to be drilled 'in situ' (fairly tight fit by the way) and the pins (one each side, about 20mm long) are left over size for easy removal with a pair of pliers. The back of the lid can then be relieved and test fitted until it opens smoothly.  For the final fit, the pins are cut to the right length, the ends polished and then pin punched under the surface...once they're in for the final time, they're not coming out again! - Rob

 

Thanks for this, Rob.  I appreciate it.  

Thanks!

  • 2 weeks later...
  • 2 weeks later...

Nice work on your boxes! I like the last one the most. My vote is for Bacote as well. Not sure, I don't recall a lemony smell when I used it last. :)

I think my favorite is the second one.  The figure on the lid is amazing.

Really beautiful work Rob!

 

I've not made a box with an alternative wood lining on the inside.  Do you laminate the two woods together and then cut the box parts, or insert the lining pieces after the box is built?

 

Pete

  • Author

Really beautiful work Rob!

 

I've not made a box with an alternative wood lining on the inside.  Do you laminate the two woods together and then cut the box parts, or insert the lining pieces after the box is built?

 

Pete

Pete, the lining is fitted after the main box has been made - Rob

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.