Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Anchoring a workbench

Featured Replies

I plan on remodeling my basement to use as a workshop.  The floor will be finished with epoxy over a concrete slab.  The heating will be radiant heating with tubing embedded in the slab.  Does anyone have any ideas on how I can securely anchor a workbench to the floor to prevent movement while, say,  planing a board, without having to drill into the floor which may inadertantly puncture the heating tubes?  Any help would be appreciated.

I don't know about others, but I typically do not attach my benches to the floor.  If I need the extra stability, I would mount to wall studs.  Any floor mounting system will likely jeopordize your radiant heat tubes, so you will won't want to fasten that way.  Non skid feet may help too. 

 

If you are serious about using hand tools, you may want to consider a beefier bench that will stay stable from it's own weight.

You could Liquid Nail some cleats to the floor around each leg once set up it shouldn't slide around anymore

post-2926-0-57809100-1376507291_thumb.jp this stuff holds like dynamite.

Agree with PB.  Attaching a light weight bench to the wall or floor is not going to make up for the fact it is a light weight bench when it comes to hand tools.  I think your goal should more be of getting/building a bench that will be heavy enough to take the rigors of hand tool work.

A heavy bench needs no anchors. It shouldn't budge when you use your tools, especially handplanes. Concrete is infamous for being "slippery"; this is the reason most people put their washing machines on a piece of ply or carpet scraps, or whatever to stops the washing machine from dancing all over the floor.

Maybe try putting your bench on a mat or high friction surface.

My bench sits on concrete that is coated with epoxy. I have some theatrical stage weights that help add mass to it as well as a tool cabinet slung under it. It doesn't move when I plane anything and I have just tonight flattened it with my jointer plane. Agian it was solid and nothing moved. So the trick is weight.

Person A: What was it that attracted you to me darling?

 

Person B: I thought I could use you as workbench ballast

When your friends ask you why you have a black eye and a bag of ice on your lower region, you just say, "You should see the other guy."

I thought my bench was light.  once I finished putting the tools on it, it wasn't so light.  to be fair, my bench is a light duty bench, but the lathe doesn't move on it or move the bench when I'm turning, so I know it's not underweight.

 

If you're thinking that you want one fixed place for the bench to stay, remember that most shops evolve over time, and the location of the bench needs to move periodically.  anchoring it to the floor permanently, even just long term, reduces your options exponentially for rearranging.

 

If anything, think of this as an excuse to begin every woodworker's dream quest/ rite of passage: building a solid/ functional workbench.

If your plane is taking a big enough bite that it's causing the bench to move when you plane it's time to adjust your plane, not the weight of your bench.

Notwithstanding advice already givin, I noticed you used future tense "will be". Is there a chance of measuring anchor points to avoid hitting the heating coils?

Other than glue like liquid nails which is good but permanent, here are some options:

-anchor bolts/j-bolts: you set these before you pour the cement, very strong but slightly challenging to insatall. These are for permanent installation, you will have to cut them flush if one day you decide you don't need them.

-wedge or shields- wedge anchors are stronger, but if the slab is shallow, wedges will not work (the mechanics of the bolt are on the tip of the bolt), but shields will. Both are permenant installation.

-large diameter tapcon- strength of a wedge, but installs like a lag screw, depth of your slab not important. If you change your mind on the install, easily removed only leaving a hole behind.

-lead lag shield- don't go there unless you are about 105 years old and like things done the hard and ineffective way.

-tapcon screws- small hole, moderately strong, easy to install

-toggler alligator anchor-looks like a plastic conical anchor, but it ain't. While driving the screw the heat molecularly bonds the anchor to the concrete, creating redidulously strong anchor in a small package. Screw is easily removed, but good luck getting the rest of the anchor out of the hole.

-Zamac nail in anchors (like hammerset)- light duty, easy to install, moderately difficult to uninstall.

-masonry adhesive-super strong, but permenant and requires $50+ tools to install

Among all these options, the best for this purpose (if you choose to anchor) are:

1. Large diameter tapcons (heavy duty-like lifting a hummer)

2. Tapcon screws (medium duty)

3. Toggler alligator anchors (medium duty)

If your bench is scooting during planing then perhaps

 

a.) The bench is too light

b.) Your blade is dull

c.) You're too strong

d.) All of the above

 

My bench is pile of construction lumber tipping the scales at well over eighteen stone with the drawers empty.  I couldn't imagine needing to anchor it to the floor because a.) I keep my plane irons sharp and b.) I'm a scrawny wimp.  Beyond that, change is the one constant in shop layout.  The moment you bolt your bench to the floor, I guarantee you'll need to move it.

Build the roubo bench from the guild.

It weighs a metric ton.

 

Another option I haven't heard mentioned here is to put one or two double thickness MDF shelves in the bottom of the bench. That stuff's pretty heavy. You may also consider those little rubber no-slide pads they make for furniture. 4 of them cost like 5 bucks at any hardware store.

  • Popular Post

If your bench is scooting during planing then perhaps

 

a.) The bench is too light

b.) Your blade is dull

c.) You're too strong

d.) All of the above

 

My bench is pile of construction lumber tipping the scales at well over eighteen stone with the drawers empty.  I couldn't imagine needing to anchor it to the floor because a.) I keep my plane irons sharp and b.) I'm a scrawny wimp.  Beyond that, change is the one constant in shop layout.  The moment you bolt your bench to the floor, I guarantee you'll need to move it.

18 stone?

Come on, Rob. I am an American. I can't even understand the metric system. Nothing less this ancient unit of measure.

 

Just curious, to get an idea of the density of your bench, how many stone per furlong is it?

Can you also tell me how many hands high is your bench?

How many cubits wide?

How many leagues from your table saw did you set your bench?

Just so I understand the area, how many perch does it take up?

 

Most Americans think that a light year is a unit of time, not length.

  • Author

Thanks everyone!  Looks like I will be building my heavy workbench sooner rather than later.  It will be my first project once things are set up.  Thanks again for your advice and humor.

If your bench is scooting along the floor, with some creativity, you can use a scrap piece of wood to brace your bench against a solid object or a wall. This is a surprisingly effective way of immobilizing a bench.

This worked so well when I used it on my first temporary workbench, which was a 12/4 poplar beam sitting on sawhorses, my "temporary" workbench wound up lasting me 8 months.

Once you've immobilized your workbench in this manner, you can then use it to build a proper workbench. ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.