Popular Post brooklyngohardwood Posted October 22, 2013 Popular Post Report Posted October 22, 2013 1. Make sure your hand is out of the way when scoring lines with a sharp knife 2. You really can plane a board square with the help of a cambered blade on a #7 3. Even a tiny nick in your plane blade will show up as a small track on your workpeice 4. Make sure you're not wearing a nice dress shirt while sharpening a plane iron 5. Don't try to clean an iron stain off your shirt while your pinky is bleeding 6. As a beginner, it's amazing how much you learn every day. 6 Quote
Tpt life Posted October 22, 2013 Report Posted October 22, 2013 I am incredibly sorry to admit you have me laughing so hard I feel tears. I hope this post is cathartic for you! 1 Quote
Freddie Posted October 22, 2013 Report Posted October 22, 2013 I read this to my girlfriend, she laughed, I didn't. I am sorry for the day you had, tomorrow will be better I promise 1 Quote
Tpt life Posted October 22, 2013 Report Posted October 22, 2013 FWIW I used to score 24" coil stock with a knife along a framing square. I cut part of my thumb off when the knife hit a burr. The older I get, the more I find the "rains it pours" statement to be true. 1 Quote
Popular Post Trip Posted October 22, 2013 Popular Post Report Posted October 22, 2013 ==> nice dress shirt while sharpening a plane iron not just when sharpening... BTW: long sleeves and woodworking machines don't mix... 3 Quote
mikem Posted October 22, 2013 Report Posted October 22, 2013 Man! We have all had days like that. The good news is that those will be lessons you will NEVER forget! 1 Quote
Freddie Posted October 22, 2013 Report Posted October 22, 2013 Have you ever drilled a cabinet door pull hole in the wrong spot on the job site?!?! I only did it once haha, that was all it took to never do it again! 1 Quote
Ozwald Posted October 22, 2013 Report Posted October 22, 2013 Have you ever drilled a cabinet door pull hole in the wrong spot on the job site?!?! I only did it once haha, that was all it took to never do it again! Or routed the dados on the wrong side of the piece? 1 Quote
pghmyn Posted October 22, 2013 Report Posted October 22, 2013 Can't learn everything from YouTube videos We all find that out the hard way. 1 Quote
brooklyngohardwood Posted October 22, 2013 Author Report Posted October 22, 2013 Ha ha, thanks guys. These responses made me feel better. I'm sure I have plenty more days of learning lessons like these ahead of me but that's what makes it fun! Quote
brooklyngohardwood Posted October 23, 2013 Author Report Posted October 23, 2013 Can't learn everything from YouTube videos We all find that out the hard way. Yes, that's part of my problem. I've only been into this for less than a year and I've spent most of that time doing research. I *feel* like I know *everything* but when I actually start doing things I realize I know next-to-nothing. 2 Quote
chrisphr Posted October 23, 2013 Report Posted October 23, 2013 Yes, that's part of my problem. I've only been into this for less than a year and I've spent most of that time doing research. I *feel* like I know *everything* but when I actually start doing things I realize I know next-to-nothing. Amen to that, brother. Quote
..Kev Posted October 23, 2013 Report Posted October 23, 2013 Yes, that's part of my problem. I've only been into this for less than a year and I've spent most of that time doing research. I *feel* like I know *everything* but when I actually start doing things I realize I know next-to-nothing. What an absolutely classy statement! 1 Quote
CessnaPilotBarry Posted October 23, 2013 Report Posted October 23, 2013 #1 earned me an Emergency Room visit in late August... Hope you feel better soon, and things go better! Quote
Tony Wilkins Posted October 23, 2013 Report Posted October 23, 2013 Yes, that's part of my problem. I've only been into this for less than a year and I've spent most of that time doing research. I *feel* like I know *everything* but when I actually start doing things I realize I know next-to-nothing. That pretty well describes me as well. You are not alone. Quote
Byrdie Posted October 26, 2013 Report Posted October 26, 2013 I have more clothes that are "ok for woodworking" that used to be "not ok for woodworking" prior to the thought that went along the lines of, "I'm just going to do this one quick thing. I won't need to change." 1 Quote
Tom Crawford Posted October 26, 2013 Report Posted October 26, 2013 I have more clothes that are "ok for woodworking" that used to be "not ok for woodworking" prior to the thought that went along the lines of, "I'm just going to do this one quick thing. I won't need to change." OH Yes! Bet we have all been there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.