Recommended Posts

Posted

I'm about to pull the trigger on a domino 500. Despite looking all over the internet I can't get a solid answer to these questions so I'm hoping someone here can help.

 

1) does the domino come with the DC hose or is that sold separately or with a CT style vac only?

 

2) assuming it does come with the hose what adapter would I need to hook it to my 21/4 hose coming off my dust deputy?

 

 

I was thinking of buying a festool vac but I have a nice hepa vac already attached to the dust deputy and really don't see the point unless its a hassle to hook this thing up to it.

Posted

To answer the first question, the hose comes with the DC, not the tool

 

As for the second question, I'll have to let someone else chime in as I don't use the Dust Deputy as I have the CT,

 

Enjoy your new Domino, they're awesome!

Posted

==> what adapter would I need to hook it to my 21/4 hose coming off my dust deputy?

 

The FT hose fits over the DD inlet... Most folks chop 1cm off the DD inlet to better accommodate the FT 50mm connector... There is a thread or two on this -- search for DD or UDD...

Posted

Thanks guys. I guess the big question now is.....Do I buy the hose for $110. and adapt it or do I use that $110. toward a package deal with the CT? Gotta give it to festool for that marketing scheme!

Posted

I did the package deal and never regretted it.  

 

That becomes really easy to say when it's someone else's money.  I do remember it was a much tougher decision when it was my money!

Posted

==> Do I buy the hose for $110. and adapt it or do I use that $110

If you're current vac doesn't have variable speed and/or HEPA, put the $110 towards a CT26/Domino package... Yea, you're spending about $400 more, but long-term, you won't regret the CT26.

 

Now if you happen to have a few extra $$

...get Oneida's UDD package for the CT-series vacs...

...and the boom-arm...   :)

...and the work center... :)

Posted

I'll throw a wrench into the fan.....another option for u would be to purchase a fein step adapter. They're around $10 shipped. It allowed me to hook up my shop vac to my domino, as I don't yet have a CT vac. However, as I'm acquiring more festool, I'm seeing that a CT would be beneficial.

Posted

Decisions decisions!  My current vac is a hepa .5 micron but alas it does not have auto start or variable speed. Some good stuff to chew on here. If I do go with the CT package what do y'all recommend size I buy? I'm thinking the CT26 or 36 would be sufficient because I plan to use a DD with it regardless.  

Posted

So I ordered the Domino 500 set and domino systainer assortment today and decided to go with the bosch vac005 hose for now (thanks for the tip cochese). I'll let you know how it works out.

Ur gonna love the domino! Great tool!

Posted

Are the trim stops and cross stops important accessories ($75 if I buy them with the unit, more if I buy them later).

Cheers,

Brian

The cross stops are useful. The trim stops have their place, but i would survive fine without them. I'd put the money into cross stops and a domiplate (Seneca woodworking). It makes the domino super accurate on referencing 1/2" and 3/4" sheet goods and stock. It all really depends on the work you're planning to do with it.

Posted

Personally, I haven't used the cross-stops that much, though I've occasionally used the trim stop on smaller pieces. Honestly, Domino calibration (google it) went a long way into setting up exact references with pencil lines, and I use the practice of a single exact width referencing mortise followed by looser ones when it makes sense.

 

Besides looking into the Domiplate, if you see yourself cutting all kinds of mortise sizes, I would suggest putting the money towards the Domino systainer collection. Not just for the Dominos, but because it comes with a kit of all cutters.

Posted

My Domino joiner was at my house when I got home from work yesterday! I tested a few different sizes and joints and was impressed with the accuracy of the factory settings. Still waiting on the Bosch vacuum hose but I was able to rig up a temporary setup to try it. Just don't tell my wife one of her vacuum accessories has be hack saw'd! shhhh!

  • 2 weeks later...
Posted

I suggest that you if you can go to a Festool dealer and play with the machine it self. They are suppose to have someone there that can walk you through using the tool step by step. It is part of every dealers contract to send people to training's so that they can then educate the end user. As for what hose to get you do not need the green anti static hose if you do not have a CT. There are two 27mm hoses that Festool makes that will work with any shop vac. The 5m non-anti static is $85.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined