Recommended Posts

Posted

Needed a few things for my upcoming Joinery Class and projects.  Trying to build a nice minimal hand tool collection to supplement my power tools.  

 

Lie-Nelson Low Angle Jack Plane - I have had a used Stanley Jack Plane for several months.  New handtool users and refurbished Jack Planes are a tough combination.  I am edge jointing so much better with the new tool.  Building a shaker table, and really needed this for the top.

 

2 Lie-Nelson Chisels - 3/8" and 5/8" - to fill in size holes in my current set of Narex chisels.

 

Hamilton Marking Gauge

 

Veritas Sliding T-Bevel

 

 

So ready for my new Table saw to show up so I can get back to work on the Shaker Table project.  

post-14301-0-84397000-1398513399_thumb.j

Posted

That bevel gauge has a beautiful handle! They are an under appreciated tool in my opinion - gives the user the ability to measure and transfer angles with no math :-)

Posted

It was on the tool list for the Joinery class I have coming up.  It is a good looking tool!

 

 

 

That bevel gauge has a beautiful handle! They are an under appreciated tool in my opinion - gives the user the ability to measure and transfer angles with no math :-)

Posted

==>Joinery Class

Who's class?

 

I've got the LN-LAJ. Funny, it's such a versatile tool, but I don't use mine as often as I should... I've also got the BU smoother and probably use it more than I should :) I'm just so lazy, that I prefer the smoother because of the adjuster... Talk about being lazy... However, my BU-Jack gets used at least once a month... I make a lot of shaker-style occasional tables with bastard grain Hard Maple bases, Aspen drawers and figured-maple tops. I plane a 2" shallow bevel on the underside of the top to lighten the look... When dealing with birdseye, tiger, or pillowed maple -- I get so much less tearout going BU... I could go BD with a back-bevel, but I'm two lazy to maintain a bevel on two faces... So I'd rather just buy another tool :)

 

I've got the chisels as well -- think you'll enjoy those. I've got several different chisls sets from a couple diferent manufacturers, but the LN's became my goto in very short order... I think it's due to the nice balance... One hint -- if you sharpen with waterstones, the chisels ship with only a light application of gunstock oil... I managed to get some watermarks on my handles after just two or three sharpenings... So if you're a waterstone guy, I'd apply a coat or two of a drying oil...

 

Good luck with the class...

Posted

Mark Adams, the school is only an hour and half from my house.  5 day class.  Figured I could cut down the learning curve significantly.  

 

 

==>Joinery Class

Who's class?

 

I've got the LN-LAJ. Funny, it's such a versatile tool, but I don't use mine as often as I should... I've also got the BU smoother and probably use it more than I should :) I'm just so lazy, that I prefer the smoother because of the adjuster... Talk about being lazy... However, my BU-Jack gets used at least once a month... I make a lot of shaker-style occasional tables with bastard grain Hard Maple bases, Aspen drawers and figured-maple tops. I plane a 2" shallow bevel on the underside of the top to lighten the look... When dealing with birdseye, tiger, or pillowed maple -- I get so much less tearout going BU... I could go BD with a back-bevel, but I'm two lazy to maintain a bevel on two faces... So I'd rather just buy another tool :)

 

I've got the chisels as well -- think you'll enjoy those. I've got several different chisls sets from a couple diferent manufacturers, but the LN's became my goto in very short order... I think it's due to the nice balance... One hint -- if you sharpen with waterstones, the chisels ship with only a light application of gunstock oil... I managed to get some watermarks on my handles after just two or three sharpenings... So if you're a waterstone guy, I'd apply a coat or two of a drying oil...

 

Good luck with the class...

Posted

==>Figured I could cut down the learning curve significantly.

Ya think??? :)

 

I've always wanted to take a hand tool class, but I never seem to make the time... Have fun...

Posted

Mark Adams, the school is only an hour and half from my house.  5 day class.  Figured I could cut down the learning curve significantly.  

Massively jealous!!! You will enjoy, I am sure!!! I had the chance years ago to go for a 7 day with someone of note and I enjoyed it thoroughly. I am surprised that you haven't emptied your pockets yet with that school being so close to you! My drive was over 10 hours one way!

Posted

Massively jealous!!! You will enjoy, I am sure!!! I had the chance years ago to go for a 7 day with someone of note and I enjoyed it thoroughly. I am surprised that you haven't emptied your pockets yet with that school being so close to you! My drive was over 10 hours one way!

 

 

I am going to try to do one a year.  Maybe in a couple years I can fit 2 in a year.  

 

There are some weekend programs that I may try to do yet this year.  

 

I figure this will be more impactful on my skills than $800 worth of tool upgrades.

  • Like 1
Posted

I am going to try to do one a year.  Maybe in a couple years I can fit 2 in a year.  

 

There are some weekend programs that I may try to do yet this year.  

 

I figure this will be more impactful on my skills than $800 worth of tool upgrades.

Game changer really... Once you learn how good you can be with hand tools, all the inadequacies of your power tools become things you can tweak by hand a lot quicker than building a jig. Hybrid woodworking is truly a great way to go :-)

Posted

Nice tool additions.  Curious as to your opinion of the LN chisels versus the Narex.  I've not tried the Narex but always heard they were the best bang for the buck; I do have a full set of LN and really love them.

Posted

Nice tool additions.  Curious as to your opinion of the LN chisels versus the Narex.  I've not tried the Narex but always heard they were the best bang for the buck; I do have a full set of LN and really love them.

 

I have not had a chance to use the LN chisels yet so it is hard to compare.  On first impressions, as one would expect, the LN seem to be better quality.  With that said the Narex chisels are pretty good as well and I do enjoy using them.  

Posted

Funny, just two days ago I posted that LN's Low-Angle Jack is a versatile tool, but I just don't seem to use it much... In fact, it was heading to eBay next week... Got to be careful what you post --- used it for three hours today, but not in any planned...

 

This morning, noticed something really odd... The weather stripping on the bottom of our garage doors disintegrated over night... Found three large piles of foam-rubber weather sealant... Strange... Figure some furry creature must have been trapped in the garage over night and tried to chew it's way to freedom... Sort of a Great Escape without the motorcycle, baseball or Germans... Now what does this have to do with a low-angle jack plane... We'll get to that...

 

Removed the damaged stripping and noticed the door edges are in terrible shape -- got a choice, fix-in-place or remove the lower panel from each door and lug them to the shop... These are big heavy solid wood doors, so it's fix-in-place. I'm sitting there wondering how to deal with this mess when I realize the LAJ is perfect. The low center of gravity allowed me to spend a couple of hours planing at awkward angles and overhead while still getting full-width-full-length shavings... Worked great.. Got everything trued-up and now waiting for the CPES to dry...

 

A few weeks ago, I planned to sell my LAJ as part of my quest to shed unused-tools... But it's a really great DIY plane... So it keeps it's spot in till... for now...

Posted

I used mine extensively for the first time yesterday, what a great tool.  I face joined several wide but short boards.   First time ever, and got them flat enough to run through my planer without ripping them down first.  

 

Says a lot for a tool to be that user friendly, literally the first time I have ever tried to do that.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 70 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined