Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

walnut and purpleheart wine rack

Featured Replies

Hello all.

 

Kind of out of the blue, I started a cabinetry/furniture course last September and shortly after, I discovered Marc's site and have slowly devoured all of the vidoes and almost all of the articles. I recently ventured into this part of the empire and am looking forward to learning from everyone here. Anyway, I recently finished my year-end project and am looking for some constructive criticism.  It's constructed of walnut and purpleheart with brass inlay. Finish is sprayed lacquer.  Joinery is pretty much all screws with glue. I toyed with the idea of using sliding dovetails to connect the spreaders to the front and back, but to keep the grooves hidden, I would only get half the height or less, so decided to go the quick and easy route of puting pocket screws on the top and bottom, then capping them off with a strip of purpleheart.  It occurred to me after I had it all assembled that I probably should have run the grain vertically on the spreaders to allow them to move but the horizontal placement was left-over from when I was considering the sliding dovetails. Each of the supports are screwed to the legs and filled with filler. I wanted to chisel out square holes and fill with homemade caps, but there being 42 of them, I just didn't have the time. One of the things I wish I'd done is alter the angle of the outside "legs."  We didn't have wide enough walnut stock to cut the shapes I wanted with the grain running straight up and down so it splays out.  I continued to use the original design, but wish I'd changed it to run the grain completely vertical (though it's not quite as noticable in person as in the pictures.)  I also had a problem with the inlay.  After setting it in (using epoxy) I sanded it to get it nice and flush with the wood, but after finishing I noticed some discolouring of the purpleheart around the brass - it's kind of brownish and less purple.  I figure it must be the brass dust getting worked in/reacting to the wood from sanding.  Overall, I'm fairly pleased with the final product.  There were certainly some challenges (I destroyed a couple of supports trying to cut them out entirely with a pattern bit on the router table when coming up the curves, against the grain. I finally went and bought a bit with the guide on the shank which made life much easier.)

 

If anyone has any thoughts on the project, I'd be delighted to hear them.

Cheers.

post-15501-0-80282500-1398637767_thumb.j

post-15501-0-67351200-1398637776_thumb.j

post-15501-0-02954100-1398637784_thumb.j

Man, that's a beautiful piece!  Why is it empty?  Is that how the design was inspired?

  • Popular Post

==>Why is it empty?

Boy that should have been obvious... The design called for straight lines... But after that first glass of Merlot, everything started to get a bit wavy... Kind of went downhill from there...  :)

  • Author

Thanks for the kind words.

 

wtnhighlander - yup - it's a wine rack. As for why it's empty, being a poor student, the only way I could fill it at the moment is if I were to sell it.

Beautiful, hopefully you MDF'ed some templates to flush trim more when you're friends/family ask for one (and purchase all the wood)

Super nice. I've been playing with wine rack designs lately too, but not yet settled on one.

 

It invokes fish, paddles and a river, very fluid. I'd love to see this design expanded into a larger version. Perhaps 6' x 6'

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.