Recommended Posts

Posted

I'd probably put opposing curves with the same radius as the inner curves. and maybe a 1/4" chamfer all the way around.

however, it might be interesting to try to do something with the underside edge of the top. not sure what though, perhaps just a half the thickness chamfer, with a similar sized chamfer on the front of the backsplash.

the piece has simple lines and curves, so probably shouldn't do anything too wild. or, maybe...

Posted

I though about that. Right now the piece has only internal radii. I'm inclined to keep the external corners as right angles.

You are correct that the underside needs a chamfer.

Sent from my iPhone using Tapatalk

Posted

I hope you don't mind me saying, but the high part of the backplash seems too tall to me. perhaps it's the perspective.

Easy enough to make it shorter...

Only got two hours of shop time today and all of it was spent playing with the DT jig. It's an older and probably cheaper version of the Porter-Cable I have at home.

u7uga9yb.jpg

No surprises here. A long train of test cuts. Test, crosscut a fresh end and then test again.

apupuhe5.jpg

And in the end you have the jig mostly set. I got everything dialed in and then walked away for the evening. Back tomorrow to see how it still looks and potentially make some cuts.

Sent from my iPhone using Tapatalk

Posted (edited)

Good thing I decided to bag it yesterday and come back afresh today. Went so much easier this morning and I got all nine drawers DT'd.

amumaput.jpg

Biggest time consumer was the lateral adjustment. This particular DT jig has separate stops for the top (pins) and face (tails) clamping surfaces. Infinite adjustability means an infinite number of ways for things to be wrong. Once I had them set to each other, I made spacers to get the stock in the right place.

5aqu5y3u.jpggepe8ejy.jpg

Ten or eleven test joints later, it was time to cross the Rubicon.

Sent from my iPhone using Tapatalk

Edited by Rob Horton
Posted

Probably so. About two hours yesterday plus another two and a half today. Pinned rabbets would have taken less time overall but there would have been some down time waiting for glue to dry.

Sent from my iPhone using Tapatalk

Posted

equ2abeh.jpg

This'll be the last time I have the piece together here. Got the drawers roughly fitted and now it's time to pull everything apart and start finishing. The oak needs to be in a vapor tent by Monday.

Sent from my iPhone using Tapatalk

  • Like 1
Posted

post-211-0-31254500-1402015764_thumb.jpg

 

Oak parts into the vapors

 

http://youtu.be/gAr1aYjFiEY

 

...and the table top and other beech parts getting a head start on shellac.

 

post-211-0-26696500-1402015760_thumb.jpg

 

It looks pretty in this shot but up close it's a brushy-streaky mess.  Brushing it on full strength, straight from the can trying to build a film.  We'll scrape and sand it flat later.

Posted

More work on the drawer pulls and another layer of shellac on the top. I'm going away for a few days and will be back on Friday with the results on the oak as well as wet sanding the top.

etyruny6.jpge7utejym.jpg

Sent from my iPhone using Tapatalk

  • 2 weeks later...
  • 2 weeks later...
Posted

Quick note to let you all know that this build hasn't totally gone dark. I'm heading out of town next week; so, with any luck, I'll have shots of the finished piece.

qujeny8u.jpg

Sent from my iPhone using Tapatalk

Posted

Now that's what I'm talking about!!  You took a bunch of boards, that looked like they were milled by a drunk sailor, and turned them into a beautiful piece if work!  You should be proud.... I'd love to help clean up a shop like that, with that sort of end result!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 44 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined