Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

James-inspired Dutch Chest with a Llama

Featured Replies

Deep knife lines (several passes) and a little patience, you'll be fine. :)

  • Replies 62
  • Views 14.7k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • wtnhighlander
    wtnhighlander

    Anyone have some banjo music to go along with this awesome dueling tool chest thread? This is getting to be as exciting as the last 5 laps of a NASCAR race!

  • Ripping is only scary if you are whackadoodle enough to insist on doing it by hand ! I think 2- 6" boards will look better than a wide/ narrow combo.

  • ==>I've got tools strewn hither and yawn across my shop Oh thank God -- someone with a shop as messy as mine... I'll just print out that photo for the wife as proof that I'm not alone... Thanks...

Great progress Mel!

 

Tony just cut your angles a little oversized put them in you Moxon vise and plane down to your lines at the same time.

  • Author

Taking a break for a moment but sawed to rough length (left myself about an inch on each board).  Found that a deep line helped me follow.  Biggest thing that helped me was the v-nick against the knife-wall at the entrance to the cross cut.  It helped me start, start straight, and get the cut close to what I need it to be.

 

14548161683_f37db5a58f_s.jpgDSCF1824 by Texchappy, on Flickr

 

The Sellers' double knife wall:

14341587277_27cf5e471c_s.jpgDSCF1829 by Texchappy, on Flickr

 

The Wearing-esque nick in the corner:

14524642781_0bbdbcdf4e_s.jpgDSCF1830 by Texchappy, on Flickr

I did some work on mine today, here's some pics.

Cleaning up the endgrain on the case sides.

u2yvygam.jpg

musu5ama.jpg

Dado time:

y6asenuv.jpg

9y5u8ame.jpg

yre2a2aq.jpg

7usutuvu.jpg

Dovetailing the case bottom:

4y9utuga.jpg

hypyneta.jpg

It's together...

buvu9ate.jpg

  • Author

Worked a little more and got both sides sawed out.

 

14525256041_0bba35a7e4_s.jpgIMG_1854 by Texchappy, on Flickr

 

The nick in the corner is helping get my saw started.  Funny thing is that my biggest saw (Disston D8) is the easiest to start (and to use).

 

Didn't do to bad off the saw on the angles:

14548770833_67d4655b01_s.jpgIMG_1855 by Texchappy, on Flickr

It's not a race. Sorry, I don't get much time to work on my own stuff. But when I do I don't stop till it's done.

Here's some pics from today...

ydaqydat.jpg

pyzy4ahu.jpg

ety5y4ab.jpg

u3yvaren.jpg

tanugury.jpg

tusa8y8u.jpg

- But when I do I don't stop till it's done.

Wait, then what the hell happened to the work bench! :)

- But when I do I don't stop till it's done.

Wait, then what the hell happened to the work bench! :)

 

 

I knew you were here somewhere!

 

Didn't take long to get you or Kiki to take the bait!

did the work bench ever get started?

I started mine last November or so. The truth is that being so darn cold and making reindeer during my spare time I had no time to finish the bench. I built the carcass, installed the leg vise and the top. So it is a functional and very capable bench. But it's not painted, tail vise isn't installed and has no drawers. Which is why I get razzed about it every time I make something. It's all in good fun, and is more of a running joke. I don't mind. :) I'll actually finish it eventually :)

Here's to bench in it's current state.

uqe2abun.jpg

  • Author

Looks like it works to me Mel.  Difference between Mel and Me working = him, work tills it’s done; me work till I’m done.  Was hoping to work this afternoon after church but after a late night scorpion hunt I came home and slept from 2 to 7 lol.

  • Author

Well, I'll just say this - sitting barefoot on the toilet in the middle of the night as a medium size scorpion saunters by isn't fun.  And now I have the image of my wife on the bed in her nighty wearing her cowboy boots and holding a yardstick.  In the end I got to some shoes, stepped on the critter, and used my grabbers to get him to the toilet to flush him down.

 

Fortunately, apparently they are rare in this part of the country.

  • Author

Mel - looks way better than the banquet table that serves as my workbench.  If you did not tell me what was missing, I would not know.  Those other guys are just jealous :)

Yeah, reminds me I need to start thinking deciding on how to do my bench.  I started out thinking BC roubo but now I'm leaning heavily toward a construction lumber Nicholson.

  • Author

Glued up my side panels today with liquid hide glue. I either need more clamps or start using hot hide glue.

Glued up my side panels today with liquid hide glue. I either need more clamps or start using hot hide glue.

I guess that'll be more clamps then :)

  • Author

I guess that'll be more clamps then :)

So not in favor of Scotch Glue then (as a Wearing calls it).

Very in favour of it ever since I saw Kevin McCloud make some from rabbit skins and pee  :wacko:  He then tested it and it was able to hold the weight of 2 men so that got my seal of approval.

 

I also like the idea of going out and catching dinner then using the leftover bits for some woodwork :D However this seems like it may be an opportunity to help boost the global clamp sales market.

  • Author

Got a 24" Jorgy CM clamp and one of their i-beam clamps to try.  I had ordered another CM clamp but haven't used it yet; 48" was just a bit more than 24" - more for the money right.  D'oh the things massive.

 

Got a face side on one of the side pieces done.  I just couldn't decide what plane to use on it - started out with the #7 but it was a little hard for me to push today (especially on a wide surface), tried my #62 and got most of it done, finally got out the #4 and gave it a go to finish it up.  If I use the #7 much on surfaces I'm either going to need a longer bench or at the very least a less cluttered bench.

Yeah, reminds me I need to start thinking deciding on how to do my bench.  I started out thinking BC roubo but now I'm leaning heavily toward a construction lumber Nicholson.

 

You'd be wise to do that :-)

 

4.jpg

 

empire.jpg

 

DSC_0116.jpg

T03668_10.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.