Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

wood for mallet

Featured Replies

just used thinned BLO, easy to refinish if I want.  

The same with WDO.

  • Author

yes but I would have had to go to the store, pick up the WDO, take it to the counter, pay for it, drive home..etc.  already had the BLO in the shop so ... heh heh. 

  • Author

if I can make a handle, anyone can.  plus, it was fun, just like everything else in this craft, right?

digging this thread. I've been too lazy and was looking around to buy one, but seeing this has me inspired to try my hand at making one. Keep those pics coming, I need some good styles to bite

This might be crazy but I have found a article on the web for using your drill press and a flat wood chisel to turn wood. I think that I will try to make a handle tomorrow after the glue dries...

 

 

Chef

attachicon.gifimage.jpg

Here you go Nod. I am still messing with some contour and the head shape but have been using it as is for the time being.

Thumbs up!

This might be crazy but I have found a article on the web for using your drill press and a flat wood chisel to turn wood. I think that I will try to make a handle tomorrow after the glue dries...

 

 

Chef

everywhere I've read has said to not do this.. something about the bearings on the DP not being made to handle those lateral forces, where as a lathe is built to handle just that. Buuuut... that's just what I've read around here. No practical knowledge on my part.  :ph34r:

  • Author

i made mine by taking a long piece of wood (16 inches or so) and cut a long miter at 1 degree down both "wide" sides, then used a rasp and sandpaper to round the handle starting about 4 inches from the fat end to the shape that I liked.  the very slight "V" shape to it lets it sit nice and tight in the mortise of the hammer head.   no turning involved.  i have seen some plans that call for a round mortise though, that may be what he's doing. 

  • Popular Post

I am probably under thinking this, but I just used a 5/8" round over bit on all four corners and ta-da... handle.

  • Author

i think for something like this, whatever works ... eh... works!  i actually enjoyed slowly shaping the handle with a rasp, I could hear paul sellers in my head (we're really working the wood now!).  but if I were in a bigger hurry, the roundover bit probably works perfectly.  also, I had fun rigging clamps and stopblocks on my sliding miter to make the long 1 degree cuts too.  probably didn't win any contests but every little thing I do, I learn something, which = FUN, and for a hobby, one can't beat that.

Chef, Looking good. Hope you don't have problems later because you didn't use enough clamps :D

  • Author

dayum I only used 2 clamps lol, although I did 2 separate glue ups so there is that ... can't wait to see the finished hammer tho. 

 

I've had this stuck in my head for a couple weeks now LOL

  • Author

I used thinned BLO, 3 coats.  someone suggested watco danish oil as well. i am guessing anything but straight up poly would do tho

Watco has a shelf life but I have a can that's 8 or 10 years old but was fine when I used it a year ago. Another can that was slightly older dried up. Obviously not a product I use very often.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.