Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood for Adirondack Chair build

Featured Replies

Hello!

 

I am just a beginner and thought I would try to build a pair of Adirondack chairs. I have a pile of shadow box fence 5/16 " stock, Is that too thin for this type of chair?

 

Also..Anyone have any plans for a curved back Adirondack chair?

 

Any help would be greatly appreciated.

Thanks,

Harley

 

 

5/16 is way to thin in my opinion . 1/2 would be the thinnest I would use. I rarely use plans other than my own, and those are sketches and pretty rough ones at that.

The WWG’s G&G Adirondack Build is non-trivial and rather tool intensive for a new woodworker -- if you've got a few projects under your belt, then have at it... But since you're asking about 5/16" stock, I'm thinking this is a first project... Don't get me wrong, it's a great build... But it’s a large step-up from the ‘traditional’ build as seen in Norm’s write-up…

 

I would strive for something closer to Norm’s build… You might look at this video to get a flavor for a chair build: http://www.finewoodworking.com/woodworking-plans/video/assembling-an-adirondack-chair.aspx

 

 

One other point – I’ve got a bevy of outdoor furniture -- way more than any sane person would contemplate -- including several versions of Adirondack chairs… There are a lot of good styles of outdoor chairs other than Adirondack… As a side note: my dad curses mine -- after a few beers, they can be hard to get out of… :)   It should be noted that these are the least occupied of the four or five styles of chairs available... If you made an Adirondack, make it a bit taller and without a steep seating angle -- they can be hard to get out of even without the beers... :)

 

 

To answer your question – South Florida can subject outdoor seating to serious abuse – you need thick stock to take a licking and keep on ticking… If you get a rot-resistant species, I’d stick with 3/4, give or take…

 

Good luck.

One other point – I’ve got a bevy of outdoor furniture… Way more than any sane person would contemplate -- including some Adirondack… There are a lot of good styles of outdoor chairs other than Adirondack… My dad curses mine -- after a few beers, they can be hard to get out of… :) It should be noted that these are the least occupied of the four or five styles of chairs available

I made mine from 3/4 cypress and fashioned them by borrowing 1 ea. from 3 neighbors. I ended up making them with less slope in the seat and back and made them about 2.5" taller. Sure makes getting up to get another beer a whole lot easier!

I did one out of cypress milled to 3/4.  The second time I left it 7/8.  I like them sturdier.  Used Norm's plans too.  

Give a thought to using vinyl decking material. My sis in law bought a few made of this because they are heavy and don't get blown over in the high winds in montana.

I use 1" poplar, with thicker stock for the load bearing areas (but not the seat).  1" poplar flexes in the seat, which is kind a nice effect.  

 

Bear in mind I consider outdoor furniture to be disposable, so I don't care that the chairs only last 3-5 years. Poplar being free for me, all I lose is time.

  • Author

All I can say is WOW!!!

Thank you all for the fast response and great information. I really appreciate the help.

I am already learning, just from this one post.

Thanks again,

Harley

I am pretty sure that Norm's revised plan is a little higher than a typical adirondack chair to make it easier to get in and out of.  But if there is a style of wood outdoor chair that you really like,   My wife hates wooden chairs so if I ever build one it better be comfortable.  The bent lam chair that FWW had on its cover last year was really nice.  

 

Was that the swoopy almost chaise-longue thing that Michael Fortune did? If so, absolutely great looking!  The gaps between the slats would let it breathe too...

HARLEY!!! Welcome if you've not already officially been welcomed! Good place to hang out. No dumb questions here....as Blue the bear said, "Fall apart in my back yard".....and some of us actually build things!!!  My wife said if I built as much as I talked about it, our house would be full of stuff. :(

I got my plans from Woodcraft marked beginner and as a beginner the more I made the more I modified them as my experience grew. As stated 3/4" is the minimum cuz there will be sanding. Also you can change the degrees the seat back is set at. My harder to get out of as stated above is at 100 degrees. The other chair I did for myself is at 90 degrees and very easy to get out of.

I put cup holders on both arms because sometimes a man needs two drinks! LOL

The one complaint from my mother who is elderly and has bad knees is they are to hard to get out of and lean back to far, as I've put on a few years and a few pounds I am starting to agree...

Eizzle the angle is totally up to the builder and 90 degrees seems the best I've tried.

Eizzle the angle is totally up to the builder and 90 degrees seems the best I've tried.

I'll give that a shot if I make more, there's several little tweaks I'd like to make, especially raising the arms a couple inches.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.