Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A close shave for this guy

Featured Replies

http://m.bbc.co.uk/news/uk-wales-32717232

 

If you can't see the video basically this Welsh DIYer cut off his hand from the wrist with a 12" mitre saw. He went out into the street shouting for help. Neighbors rallied around and phoned for paramedics. They arrived really quick. In the meantime his neighbor went upstairs where he had been working wood and retrieved his hand still with his watch on. He then put it into a plastic bag and plunged it into ice while the paramedics reassured the victim that he wasn't going to die. He didn't and doctors reattached it and the video shows some movement of the reattached limb.

 

If you can see the video the guy is speaking English with a strong Welsh accent!

 

And here is the story of reattachment

http://m.bbc.co.uk/news/uk-wales-south-east-wales-32713364

 

Obviously CA glue is not gonna work all of the time :)

He's very fortunate indeed. I wish it would have told the circumstances that led to the accident. It might help prevent the same from happening to one of us. So many times I've looked that blade straight it the eye and hoped I had a firm enough grip on it.

Thanks Terry for sharing.

Not to sound insensitive and I'm glad the chap is doing well but, how in the world??? He lopped it off way above the wrist. Did he mistaken his arm for colonial molding? Is it just me, or does anyone else agree this takes serious talent?

 

Even if he had a small piece and it pulled him in, how the hell did it pull him in that far!

Not to sound insensitive and I'm glad the chap is doing well but, how in the world??? He lopped it off way above the wrist. Did he mistaken his arm for colonial molding? Is it just me, or does anyone else agree this takes serious talent?

 

Even if he had a small piece and it pulled him in, how the hell did it pull him in that far!

 

I could conceivably see it catching on a shirt sleeve and pulling his arm in. 

I could conceivably see it catching on a shirt sleeve and pulling his arm in. 

from the article "The sleeve of his top got caught and dragged his left arm under the blade."

 

That would make for a bad afternoon in the shop.

There are some things in life that should require a special test and license. Using power tools, making children and marriage are just a few.

 

Marriage already does require a test and license but a lot of good it does.  My first two were suspended :wacko:

First rule of the shop... No loose fitting clothes... Second rule of the shop, no long sleeves, long hair or anything that can get caught in a machine. Third rule of the shop, obey the first two rules before touching any machine!

First rule of the shop... No loose fitting clothes... Second rule of the shop, no long sleeves, long hair or anything that can get caught in a machine. Third rule of the shop, obey the first two rules before touching any machine!

My job, the industrial maintenance part anyway, requires long sleeves all the time no exceptions.

If I were guessing what happened, I would say, the area was cluttered, he was in a rush and stumbled into the machine putting his arm up to catch himself

My job, the industrial maintenance part anyway, requires long sleeves all the time no exceptions.

 

 

+1 on the long sleeves.  You just gotta be careful about the sleeves; not to baggy & snug cuffs.

My job, the industrial maintenance part anyway, requires long sleeves all the time no exceptions.

If I were guessing what happened, I would say, the area was cluttered, he was in a rush and stumbled into the machine putting his arm up to catch himself

 

Why would the machine be on in that case?

 

As for long sleeves, it depends a lot on what kind of maintenance and such you are doing.  Electrical welding it is important to block the UV light for example.  And of course all maintenance should be done with the machine properly locked out.  I would suspect this was more an issue of improper use and not maintenance strictly.  I remember someone talking about losing a finger to a jointer because they did not unplug it while performing maintenance.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.