wouldwurker Posted June 19, 2015 Report Posted June 19, 2015 When my uncle bought his shore house back in 99 the standalone garage was full of woodworking tools. My priorities at the time mostly revolved around playing music and chasing girls....not so much woodworking. Most of it, has since been pilfered extended family members... But I did come across an old rasp set. Some are Nicholson and there appears to be a few old craftsman in there. Pretty cool stuff ...all shapes and sizes. Square, triangle, tapered, etc... What's my best strategy for rust cleanup? Thanks all. -VJ Quote
TerryMcK Posted June 19, 2015 Report Posted June 19, 2015 Some of those handles look a bit chewed up Vin - the bottom 8 handles look like sections of dowel or broom handle. A few of them look like metalworking files as opposed to rasps - the fourth one from the bottom seems to have shiny sections where bits of swarf are still remaining on the teeth. I would just get to work with a file card to clear out any remaining bits from the teeth and call it done. Quote
wtnhighlander Posted June 19, 2015 Report Posted June 19, 2015 I've read that old rasps can be "sharpened" by a soak in mild acid solution, like vinegar. Never tried it, though. Quote
Eric. Posted June 19, 2015 Report Posted June 19, 2015 Vinjo - I think I recall you own an Auriou modeller's rasp...am I right? Which means you're gonna be really disappointed in the performance of those things even if you take the time to clean them up. I inherited a bunch of Nicholsons from my grandfather...they just sit in a drawer. My advice to you...spend ten minutes trading a couple more stocks...take the profits and buy another Auriou or two. It looks like you only have a couple rasps there anyway...the rest are files...they're for metal. Quote
wouldwurker Posted June 19, 2015 Author Report Posted June 19, 2015 Eric..you have a scary good memory. I do indeed have that Auriou modelers rasp. Thanks all for the detailed input. Seems like I have some shop wall decorations here...which is also ok. 1 Quote
Guest Posted June 19, 2015 Report Posted June 19, 2015 put some fake blood on them, get some life sized Statler dolls, and use them for Vinny JoJo's Halloween House of Hotlanta Horrors come this fall. Quote
Barron Posted June 19, 2015 Report Posted June 19, 2015 Files and rasps of different sizes are always handy to have around. I'd soak them in citric acid for while, brush them off then rinse them off and spray them with WD-40, or what ever rust preventer you like, and turn some new handles. Older Nicholsons are OK rasps and files and making handles is actually kind of fun. You don't even need a lathe. 2 Quote
Brendon_t Posted June 19, 2015 Report Posted June 19, 2015 I'm confused, did VJJ change his name too? Quote
xxdabroxx Posted June 19, 2015 Report Posted June 19, 2015 I don't even know who this person is anymore... Some strange new guy with 1800 posts? Quote
wouldwurker Posted June 20, 2015 Author Report Posted June 20, 2015 I'm confused, did VJJ change his name too? I did indeed. It was time to reinvent myself...like Madonna...on Bruce Jenner -VJJ Quote
Brendon_t Posted June 20, 2015 Report Posted June 20, 2015 well thanks for the heads up kaitlyn Quote
Eric. Posted June 20, 2015 Report Posted June 20, 2015 I did indeed. It was time to reinvent myself...like Madonna...on Bruce Jenner -VJJ Madonna ON Bruce Jenner? Somehow you found a way to make things even worse. Congrats. Quote
Llama Posted June 20, 2015 Report Posted June 20, 2015 I did indeed. It was time to reinvent myself...like Madonna...on Bruce Jenner -VJJ I suppose you want an award too... Quote
Tom King Posted June 20, 2015 Report Posted June 20, 2015 If the teeth still have any depth to them, send them to Boggs or SaveEdge to have them sharpened. One has a minimum quantity, but I don't remember which. Quote
wouldwurker Posted June 20, 2015 Author Report Posted June 20, 2015 Madonna ON Bruce Jenner? Somehow you found a way to make things even worse. Congrats. Hahahahhaha Quote
Brendon_t Posted June 20, 2015 Report Posted June 20, 2015 May just be the pictures butt all except one of those look like metal files to me, the guy who's never owned a rasp.. What's the difference? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.