JosephThomas Posted September 28, 2015 Report Posted September 28, 2015 I'm in the market for a better table saw (on a budget) and I'm wondering if anyone has experience with the Jet jwts-10cw. It's a contractor style saw, and the owner is asking $350 for it along with a few accessories: exacta fence, attached 46" side table, a couple old spare forrest and diablo blades, an old 8" dado stack, a tenoning jig, a roling base (already installed on the saw), and an outfeed roller. The seller also noted that it has PALS trunnion adjustment brackets installed and its the model that has the V-belt to reduce motor vibration (see 3rd photo below).What do you guys think, any thoughts on this model, and does it sound like a decent price? Also, thanks in advance to anyone that takes the time to reply and help me out, I appreciate the input. Quote
wtnhighlander Posted September 28, 2015 Report Posted September 28, 2015 From what I see selling in my area, that is a pretty good deal. And a fairly nice setup, even though it is a contractor saw. Quote
estesbubba Posted September 28, 2015 Report Posted September 28, 2015 I had that Jet contractor saw for many years and it worked great. That one has better fence and belt and thinks it's a pretty good deal. You can clean up the cast iron using WD40 and massaging using green scotchbrite and finish sander. Quote
Brendon_t Posted September 28, 2015 Report Posted September 28, 2015 If it was just the saw, no. With the saw and all the extras, blades, and so on. That looks like a pretty good price. Quote
CharlesC Posted September 28, 2015 Report Posted September 28, 2015 Apparently we are neighbors...lol. I had to talk myself down from making an offer (I really don't have the space). Seems like a great deal from what you can usually find on our craigslist. Quote
Tom King Posted September 28, 2015 Report Posted September 28, 2015 I hope you've bought it by now...16 hours after your post. Quote
Tom Cancelleri Posted September 28, 2015 Report Posted September 28, 2015 I had the model street that saw, was a good saw, the xacta fence is a great fence system. I had no complaints with mine. The link belt is definitely a must for that saw. Sent from my 831C using Tapatalk Quote
JosephThomas Posted September 29, 2015 Author Report Posted September 29, 2015 Hey guys,It was sold within ~8 hours of him posting it and I didn't get it I guess it was a good deal. Quote
Tom Cancelleri Posted September 29, 2015 Report Posted September 29, 2015 While I'm not a huge Delta fan, this is a good price for the saw, I believe it's only 1 HP though. Think about what it is you're looking to build, and what you are going to be cutting.http://sfbay.craigslist.org/nby/tls/5243378859.html You're in California right? If not let me know your area, I'll keep an eye out for stuff. Quote
JosephThomas Posted September 29, 2015 Author Report Posted September 29, 2015 Yes, but southern california in the San Diego area. Thx for the help. Even giving examples of reasonable deals like this help me out even if I can't buy that specific one, teaches me slowly what models are decent and what prices are fair, so thanks. I'm mostly building smaller-medium sized furniture. I have to take a break for a while to have knee surgery, but after that here's the next few things I was planning: a buffet table for our dining room, some nightstands that match our bedroom furniture, and some patio furniture. Quote
knotscott Posted September 29, 2015 Report Posted September 29, 2015 (edited) That Jet did look like a pretty sweet deal....oh well....wasn't meant to be. From a glance of CL in San Diego, I spotted a couple of Ridgids and a PM contractor saw that both looked reasonably priced. The "patina" should clean up pretty easily.PM w/Vega fence - http://sandiego.craigslist.org/csd/tls/5243697444.htmlhttp://sandiego.craigslist.org/csd/tls/5232664996.htmlR4511 - http://orangecounty.craigslist.org/tls/5179004745.htmlCman w/updated fence - http://inlandempire.craigslist.org/tls/5205302773.html Edited September 29, 2015 by knotscott Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.