d8nk Posted January 3, 2016 Report Posted January 3, 2016 I screwed mine down, no bubbles. Perhaps the piece is warped... Quote
..Kev Posted January 3, 2016 Report Posted January 3, 2016 I used screws on mine as well so that it would be replaceable. I just don't have issues seeing screw heads in my outfeed table. Quote
Chet Posted January 3, 2016 Report Posted January 3, 2016 That looks like it finished up real nice Shep. I thought I had seen a video on the Wood Whisperer were he was building a new assembly table and if I remember correctly, he used a masonite top but I forget how he attached it. You might check that out. Quote
sheperd80 Posted January 3, 2016 Author Report Posted January 3, 2016 Yeah i saw that vid. Not sure he mentions exactly how he attached it but he did say he didnt bother to make it removable this time. So he probably glued it down. Thanks all. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
estesbubba Posted January 3, 2016 Report Posted January 3, 2016 On Marc's last assembly table he skipped the hardboard and just used MDF for the top. Quote
jdbrown1998 Posted January 3, 2016 Report Posted January 3, 2016 I like the build - this is towards the top of my shop builds. DId you put it on wheels? Mine would need to be because my wife kicks me out of the garage when there is snow outside. I think I even have the same table saw! The only thing I would add to mine for functionality would be to have a place where I could put a bench top tool station. Something like this except I would only have the front lip with holes to "loosely" bolt it into threaded inserts on the assembly table. http://www.woodstore.net/plans/shop-plans/tool-bases-stands/1366-Bench-tool-System.html Quote
sheperd80 Posted January 4, 2016 Author Report Posted January 4, 2016 Thats a cool idea. You could use that for certain jigs too i bet. . No wheels. I considered it but decided id rarely if ever move it, and i want the stability. It is scribed to the floor right now so its got full toe-kick contact and feels very stable. I ordered leveler legs but now i dont know if i want to use them. Its a shy 16th below the tablesaw and almost perfectly parrallel. So id have to modify it to use the levelers and sacrifice some stability. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
sheperd80 Posted January 16, 2016 Author Report Posted January 16, 2016 Made a small addition to the table today. A removable shelf for 1/4" shank router bits right in reach of the router table. I'll make another for 1/2" stuff later. . Next up is drawer organizers, tills etc for the handplanes, chisels, rasps, etc. Maybe today if i feel like it but work has been rough so im lacking motivation. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
estesbubba Posted January 16, 2016 Report Posted January 16, 2016 Looking great! Might want to put a piece of acrylic on the outside in case something falls into your router bits to protect the carbide. Quote
TerryMcK Posted January 16, 2016 Report Posted January 16, 2016 Great work. Almost too nice to be in the shop. Quote
wdwerker Posted January 16, 2016 Report Posted January 16, 2016 I have had good luck screwing 1/4"MDF or Masonite down from above. If you sealed the torsion box with a couple coats of varnish and let it dry good you could use Wilsonarts H2O contact cement to apply the 1/8 skin. When you want to replace it a putty knife and some mineral spirits in a glue bottle squirted in will release the bond. Scrape up the residue, let it dry and you can go back with a new 1/8 skin. Wasn't " Shep " George of the Jungles pet elephant ? 1 Quote
Brendon_t Posted January 16, 2016 Report Posted January 16, 2016 5 minutes ago, wdwerker said: Wasn't " Shep " George of the Jungles pet elephant ? Indeed it was. Quote
sheperd80 Posted January 16, 2016 Author Report Posted January 16, 2016 What the heck is up with tapatalk!?! It made a duplicate post, so i deleted it, then both dissapeared... Anyway i decided to add this today as well. Looking great! Might want to put a piece of acrylic on the outside in case something falls into your router bits to protect the carbide. I have had good luck screwing 1/4"MDF or Masonite down from above. If you sealed the torsion box with a couple coats of varnish and let it dry good you could use Wilsonarts H2O contact cement to apply the 1/8 skin. When you want to replace it a putty knife and some mineral spirits in a glue bottle squirted in will release the bond. Scrape up the residue, let it dry and you can go back with a new 1/8 skin. Wasn't " Shep " George of the Jungles pet elephant ? Great ideas, i might have to do them both. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.