Recommended Posts

Posted
36 minutes ago, Tom King said:

I just poked around the whole Southeast on craigslist, and pickings are slim, and prices are high.  If you need one soon, looks like a new Grizzly will be the best spent money.  An 8" is many times more useful than a six inch.

This looks like a good deal, but too far:   https://lancaster.craigslist.org/tls/5376504106.html

Tom are you offering? 

Posted

That would be a def no, tons of better deals out there, just gotta be patient.  I got an 8" grizzly jointer with a byrd head in it for $800, can't remember how old it is, 5 years old I think but looked brand new.  Not a spectacular deal, but I was pretty happy with it and happy with the machine.

Posted

Next week might be better.  I look at craigslist fairly often, and there might be six good deals on one type of machine one week, and none the next.  I was looking for a 2 hp dust collector a few weeks ago, and there were a bunch available.  Ended up getting a Grizzly that might have been turned on once for $175 a mile out of the way when I rode with my daughter to look at a house she was thinking about buying.  Out of curiosity, I looked again a couple of weeks later, and there was nothing but junk listed.

I was thinking about that 12" for myself, but it's too far away.  I really want a bigger one anyway.

This thing has really caught my eye too.   I could probably sell the 24" Centauro for enough to buy this one with, and it's only a couple of hours away.  I'd pull the trailer to move that one on.

https://raleigh.craigslist.org/tls/5348178124.html

that same seller also had a 12" Northfield jointer for sale, but looks like it's gone.  I would have been on my way if it had been a 16" or 20".  I could have hauled both of them at the same time.

 

 

Posted
15 hours ago, Tom King said:

Next week might be better.  I look at craigslist fairly often, and there might be six good deals on one type of machine one week, and none the next.  I was looking for a 2 hp dust collector a few weeks ago, and there were a bunch available.  Ended up getting a Grizzly that might have been turned on once for $175 a mile out of the way when I rode with my daughter to look at a house she was thinking about buying.  Out of curiosity, I looked again a couple of weeks later, and there was nothing but junk listed.

I was thinking about that 12" for myself, but it's too far away.  I really want a bigger one anyway.

This thing has really caught my eye too.   I could probably sell the 24" Centauro for enough to buy this one with, and it's only a couple of hours away.  I'd pull the trailer to move that one on.

https://raleigh.craigslist.org/tls/5348178124.html

That one recently sold on Ebay: http://www.ebay.com/itm/Northfield-36-Bandsaw-/231776267142?hash=item35f6f12b86:g:iRYAAOSwp5JWZMIX

Looks like they are trying to flip it.  I have the same model saw in my shop.  It weighs ~2400 lbs, so it will not be quite as easy to move as the Centauro.  FWIW, I got mine on ebay fro $1150.

15 hours ago, Tom King said:

that same seller also had a 12" Northfield jointer for sale, but looks like it's gone.  I would have been on my way if it had been a 16" or 20".  I could have hauled both of them at the same time.

 

 

 

Posted
4 hours ago, minorhero said:

I bought a similar grizzly used and newer then that one for 200 in maryland a few years ago. 400 is way too much for a used 6" jointer with flat blades. 

I appreciate the information

Posted
8 hours ago, andrew-in-austin said:

That one recently sold on Ebay: http://www.ebay.com/itm/Northfield-36-Bandsaw-/231776267142?hash=item35f6f12b86:g:iRYAAOSwp5JWZMIX

Looks like they are trying to flip it.  I have the same model saw in my shop.  It weighs ~2400 lbs, so it will not be quite as easy to move as the Centauro.  FWIW, I got mine on ebay fro $1150.

 

I think that was their own bid in the middle of December to set a reserve.  I know sellers are not supposed to do that, but I often see a sale like that with one bid, and then it comes right back up later. The pictures are the same. I expect there is some wiggle room in the CL price.  No problem to move it if they have a forklift.  I can back the trailer in the shop I'd keep it in, which is really our farms mechanic/metal shop with a tall ceiling and chain hoist.  I don't really need it right now, since the Centauro is doing what I need it to do, but if they had also had a wide jointer, the temptation would probably have been too much to resist.  I've seen some go cheap too, but nowhere near me, and this is only a couple of hours away.post-14184-0-42784200-1422140941_thumb.j  This trailer can carry a little over 10,000 pounds. (already had that picture in here)

Posted

Tom, yeah, you will have no problem with that trailer.   I had a 7 foot garage door clearance at my house which made moving it a little more difficult.  If you do check it out, check the tires closely.  They last a super long time, but they are something like $300 each.  I have not really pushed my saw hard yet, but rest assured, it is in a completely different class of saw compared to the non-cast iron saws.  It will handle anything you can throw at it.

Posted
19 hours ago, Brendon_t said:

Tom how did the centauro do with the cypress shingles?

3 seconds to resaw a 6" wide 24" long board into two shingles. It's running a 1" Woodmaster CT 1.3 TPI, and makes the cut really smooth.  I had one helper put a piece against the sled, I push it through, other helper stacks on pickup backed up to the door that we have the saw in.  None of us have to take a step.  I had originally thought I might run them on site and stack directly into the loader bucket, but the tractor would have torn the yard all to pieces with all the rain we've had.  It took us two hours to run 8' boards into a heaping pickup truck load of shingles.

We've had a lot of rain, and only one or two days a week to work on that roof, so it's still in process.  I have movies saved, but not up anywhere yet.

Posted
11 minutes ago, Tom King said:

3 seconds to resaw a 6" wide 24" long board into two shingles. It's running a 1" Woodmaster CT 1.3 TPI, and makes the cut really smooth.  

That's is quite impressive. It takes me about 3 minutes to resaw a 24" boats if I want a nice surface.

Posted

Thread hijacking runs rampant!

Buy once cry once!  If the used stuff is crap, wait till you can afford what you want.  If you buy crap 2 or 3 times, you end up paying way more than what you wanted in the first place!

Good luck.

Posted

I am not buying from an individual. The lumber dealer and local furniture maker here in town bought out a whole shop and is offering this for sale. He stated he would sell it to me only of it checked out after he ran it today. Seeing as how he has a reputation and would like to keep customers being a small outfit I feel like he will be honest. I hope it works out like I think 

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 67 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined