Recommended Posts

Posted

Always discovering new and fascinating tools.

A while ago someone mentioned a miter knife.  If I were doing any quantity of frames or trim work -- what a nice addition.

Then I came across one of these -- the Jyden.

http://www.skylinepictures.com/Frame_Moulding_Cutting_Joining_Equipment_ufe1693_full.htm

I'm finding new gizmos every week.  Maybe someone should write the book "Everything you never wanted to know about woodworking and didn't know enough to ask."

Posted

Actually been thinking about putting one of those in my shop.  I don't do frames very often but, would be nice to have when I do.  Pretty sure Rockler carries one as well.

Posted
2 hours ago, TIODS said:

Actually been thinking about putting one of those in my shop.  I don't do frames very often but, would be nice to have when I do.  Pretty sure Rockler carries one as well.

Those I've seen before now are benchtop and hand operated.  The floor mounted units, being foot operated, would be able to trim heftier material.  The blades appear much larger.

Posted

I have not seen this nibble workflow. I am used to oversize (1/8") SCMS and stop blocked trimming. Do people actually advocate starting with square stock and cross cutting a whole board this way??

Posted

used the floor model, foot operated, at my last job, the wood shop had one. you don't cut square stock with it just trim already cut mitre to final length. it would trim a 4 inch board. cool to use but i wouldn't buy one, the one i used had to be 75 years old and still worked great with sharp knives

Posted

Those guillotine trimmers are probably the best thing for cutting pre-made picture frame moldings, but pretty specialized for that use. Most frame shops will have the floor stand, foot pedal operated version. Perfect corners every time, no flipping of stock or tool.

Posted
12 hours ago, Eric. said:

Not sure why anyone other than a professional picture frame maker would need one of those.

For everyone else, this works fine (not my pic)...

 

Setting%20Up%20and%20Using%20a%20Shootin

 

 

All it needs are clamps for the stock and vertical handles.

But novice that I am, I have to ask ... won't that plane start cutting into its (not knowing the right term) platform and that miter as well as the stock? Looks to me like a design that will need to be replaced regularly.

Posted

As long as you use a plane that doesn't have a blade extending all the way through the side of the body (think rabbet block), the plane will ride on a small strip of material left at the bottom of the step and will not eat into the fence...very much.

Even still, yes you do have to replace them from time to time after they get chewed up.  They also take a few minutes to make...and they're free.

BTW, FYI...it's called a shooting board and it can be found in every hand tool woodworker's shop...

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.