Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Purchase or Rent Shop Space?

Featured Replies

Hi Everyone - New here. In the Seattle area, been woodworking for 5 years but have been spending a lot more time in the shop the last year. Starting to use a lot more hand tools which is fun. 

I'm  looking for opinions on pros/cons of making a couple significant tool  purchases or instead renting shop space in a cabinet shop. 

I have a two car garage shop with a decent selection of all power tools (table saw, router table, drill press, band saw, mortiser, 6" jointer, 13" planer). 

I feel it's time to upgrade to at least an 8" jointer and 15" planer with spiral cutterheads. The 6" jointer is limiting and generates waste since most of the boards I purchase are wider  than 6" but not wide enough to justify ripping, jointing and gluing back together. Also hate setting the knifes. 

The downside of purchasing is my shop isn't huge and these will take up significantly more space then the tools they'll be replacing. 

I was talking to another customer at the lumber yard and he mentioned that there was a cabinet shop that rented out shop hours to hobby woodworkers. I looked into it and they offer various subscription levels - 20 hours a month for $150 or 8 hours a month for $75. Its a full selection cabinet shop with 8" and 12" jointers, 20" planer, drum sanders and panel saw.

This got me thinking, now I'm considering renting 8 hours a month and using it just to mill my wood. Would still do the joinery and finish work in my shop so 8 hours a month should be sufficient. It would also give me access to drum sanders which could come in handy. 

The biggest downside I see is convenience. Its nice to  have the tools in your own shop. The rental shop is 10 minutes from my office and the lumber yard but 45 minutes from my house. 

Has anyone ever done anything like this? Were there other major drawbacks you found that I'm not considering?

Thanks!

Welcome.  I don't think I would like this option, unless I only had an apartment or some situation where power tools couldn't be used.  2 things come to mind that could be issues, 1) what are the places hours of operation, and feesable with work schedule 2) if you have to wait in line to use the machines, is that really good investment or will you need to go up to more hours.

The other thing I would look into is can you buy a block of time just when you need it.  8 hours a month may be good for one project but the next month you may not need any time at all so it becomes $75 wasted. 

The idea of it sounds cool to be able to use those big tools but 8 hours can be used up quick.  I'm in a 2 car garage, I've got an 8" jointer, 15" planer, cabinet saw and more crap, mobile bases is key.  It does suck because I have to move my jointer and planer around to use them on long stuff, but it's better than spending money on using tools that aren't mine and having to drive somewhere to do it.  And screw going back to a 6" jointer haha.

I personally see this as a horrible idea. What happens when you mill your wood, get it home and find out you need one more piece...or it's just a little to thick/thin. You can't turn around and run it back through the machine one more time. So many other issues that can arise. The machines aren't maintained well and your boards are not square...now your paying for the use of broken crappy equipment and you have unusable material. The guy leaves a stack of lumber 5 foot tall in front of a machine you were hoping to use to finally get this project done. You don't have a key to get in and he is having back surgery and won't be around for the next 2 months and you left your wood there. The list goes on and on. Just say no.

  • Author
1 hour ago, Woodenskye said:

Welcome.  I don't think I would like this option, unless I only had an apartment or some situation where power tools couldn't be used.  2 things come to mind that could be issues, 1) what are the places hours of operation, and feesable with work schedule 2) if you have to wait in line to use the machines, is that really good investment or will you need to go up to more hours.

Good point about waiting in line. I didn't think about that and it would be a deal breaker. 

They're open until 10PM. At some of the higher subscription levels you can use the shop 24/7.

17 minutes ago, Chet K. said:

The other thing I would look into is can you buy a block of time just when you need it.  8 hours a month may be good for one project but the next month you may not need any time at all so it becomes $75 wasted. 

You can buy or rent blocks by the hour but it is like $50/hour. With the 8 hours a month subscription you have to commit to at least 3 months and give 1 month notice of termination.

 

11 minutes ago, Gixxerjoe04 said:

The idea of it sounds cool to be able to use those big tools but 8 hours can be used up quick.  I'm in a 2 car garage, I've got an 8" jointer, 15" planer, cabinet saw and more crap, mobile bases is key.  It does suck because I have to move my jointer and planer around to use them on long stuff, but it's better than spending money on using tools that aren't mine and having to drive somewhere to do it.  And screw going back to a 6" jointer haha.

Great points. I can make it work in the space buying these tools but it gets challenging if I continue to add tools at this rate ;)

 

Appreciate all the feedback. Lots of things I hadn't considered. While I think it would be nice freeing up the space by milling at a shop I am starting to think the inconvenience won't be worth it.

I used a 2 car garage for years and many others have too and it will handle an 8" jointer and 15" planer just fine. Guess how many projects I've done and didn't have to mill another board in the middle of it? Zero! That alone would be a big PITA to jump in your truck and drive just to mill one board. Then you get to do that after some dude just got done milling 200 BF of hickory and the knives are duller than a steak knife at Outback. 

My 2 car garage/shop is about 23' x 25'. In it I've got a cabinet saw /w 36" fence, 14" band saw, 17" drill press, 6" jointer, 13" planer, SCMS station, 32" x 72" workbench, 24" x 48" workstation & various storage shelves & racks. And I park 2 cars in it every night. Most machines don't have to be moved more than a foot or 2 to be used, although I can't do a lot without moving at least 1 car out.

It's not ideal, but it works fairly well. But it would have to be a lot, lot worse for me to want to have shop space elsewhere. I often work out there as little as 1/2 hour at a time. That & what Mike & Janello said are right on.

.Like  said its best not to  do this and I would get a sander first and you wont need to worry about a spiral head cutters for now....I sand the face and edj sometimes .I have a 8in jointer but rip most glue ups to 4in or less..

My workspace is similar to DrZaius, (with somewhat less nice machines!), but I park a Chevy Avalanche and a Nissan Murano in the garage. The only time I have to move a car is for milling. Occasionally for assembly, if it is a big piece. Of course, my wife PREFERS that I move her car to keep dust off of it, provided it isn't raining!

A draw front or door panel and top seem to stay flatter when not using wide glue ups..Just my opinion with the work I do Mike..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.