ncfowler Posted February 21, 2016 Report Posted February 21, 2016 Last night I was waken up by a thumping pain in my thumb, After close inspection I found a small splinter no bigger than head of a pin, and just under the skin, after picking out with a needle the pain went away, it is always surprising to me how such little things have such an impact, Heck I did not even know I had a splinter. now here is the part I don't under stand, I was finishing sanding by hand yesterday, using my the hand opposite the one the splinter was in, It must be one of them ghost splinters. Quote
Chestnut Posted February 21, 2016 Report Posted February 21, 2016 It could have been there a while until it got slightly infected my splinters that i don't get out right away take a day or so to start throbbing. That feeling though once you finally get it out is refreshing though. Sent from my VS986 using Tapatalk Quote
woodbutcher74 Posted February 21, 2016 Report Posted February 21, 2016 You have to watch out for some of those exotics, they can shoot splinters like a porcupine can shoot their quills. Quote
Rapid Roger Posted February 21, 2016 Report Posted February 21, 2016 I worked in a sheet metal shop for 12 years before I went into the mobile tool business. (for 20 years) For the first 3 years of driving a tool truck, I was always removing little slivers of steel from my hands. They didn't bother me or my hands until they would surface and then I would use tweezers to pull them out. My customers were always amazed when I would grab a pair of needle nose pliers or something to remove a small sliver of steel. Some times I would grab a magnet just to prove that it wasn't wood or something else. Quote
Coop Posted February 22, 2016 Report Posted February 22, 2016 I've found that if you have a difficult splinter, one that requires digging with a pocket knife, apply a band-aid and leave it for several days, thru showers and all. It'll suck it out! Quote
Tpt life Posted February 22, 2016 Report Posted February 22, 2016 My dad still has mortar shrapnel working its way out like splinters after getting hit in 71 or 72. Unless it causes infection, it can be there awhile before it erupts. 1 Quote
Popular Post wdwerker Posted February 22, 2016 Popular Post Report Posted February 22, 2016 Keep " Splinter Out " disposable sterile lancets around for digging out those irritating tiny splinters. They are cheap ( Amazon) and work better than a needle. I keep one in my wallet just in case.b Give me a bigger splinter that I can pull out with a pair of needle nose pliers any day . 3 Quote
Tom Cancelleri Posted February 22, 2016 Report Posted February 22, 2016 I used to work with fiber optic cabling and I got a really fine splinter from that, and it couldn't be seen because the cable is made from glass. It hurt so bad, but wasn't infected. My dad came up with the idea of using a colored flashlight to see it and dig it out. Quote
Rapid Roger Posted February 22, 2016 Report Posted February 22, 2016 I just remembered of a tip that I read some time ago.... To remove a wood splinter from a finger just put a dab of glue on it and after the glue dries in a few minutes just peal it off of your skin and the splinter comes out with it. Of course the wood has to be exposed at the surface for the glue to stick to it but, it is much less painful than using tweezers or digging it out with a sharp instrument. 1 Quote
Tom Cancelleri Posted February 23, 2016 Report Posted February 23, 2016 7 hours ago, Rapid Roger said: it is much less painful than using tweezers or digging it out with a sharp instrument. 1/4" forstner bit spun at 400 works like a charm! 1 Quote
Tom King Posted February 23, 2016 Report Posted February 23, 2016 If it's tiny, but doesn't require an incision: http://www.ebay.com/itm/301860447540?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT I threw away all the old tweezers out of the house, and replaced them with Tweezerman tweezers off ebay. Quote
ncfowler Posted February 24, 2016 Author Report Posted February 24, 2016 I like the glue idea, here is something I learned from some installers, when working with fiberglass flex duct, or any fiber glass in that matter, if you get baby powder and powder yourself up real good first, it will keep the fiberglass out of the pours. Quote
wdwerker Posted February 24, 2016 Report Posted February 24, 2016 Just keep that talcum powder out of your crotch, might lead to cancer ! Quote
ncfowler Posted February 25, 2016 Author Report Posted February 25, 2016 9 hours ago, wdwerker said: Just keep that talcum powder out of your crotch, might lead to cancer ! dang, I use baby powder all the time, I guess I need to find something new, I wonder if I have any saw dust in my sander? Quote
wdwerker Posted February 25, 2016 Report Posted February 25, 2016 Johnson & Johnson lost a $72 million lawsuit that the talc in the baby powder leads to cervical cancer. Apparently they knew about it for many years. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.