Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

First Trip to Lumber yard

Featured Replies

Making my first trip to the lumber yard tomorrow. I've watched a few videos and have done a little research, but I'm sure I will look clueless in there…learning experience.

I understand 1 BF = 144 cubic inches and know the difference in 8/4 6/4 etc questions I do have…

1) What is the smallest piece lumber yards typically sale? I want to make a cutting board so don't need a ton of material.

2) Most prices online have several different prices for the same wood i.e. Iroko cost $9.74 bf (1-99), $8.77 (100-999), $8.28 (1000+). I'm guess that has to do with a) the quality of the lumber and 2nd guess b ) quantity of lumber. Gut is going with "a". If i am correct with "a" and I'm doing a cutting board do I need high quality?

3) Video I watched used 2 types of wood hard maple and walnut. I want to go with a light and dark wood and plan is to get those 2 but I want to have a back up incase they don't have one of those and don't look stupid in front of them asking about every wood there. What are some good substitutes for both maple and walnut that would look good together?

Yes I know to some I sound like an idiot always asking the "easy" questions on here but honestly don't care. Everyone started somewhere.

Thanks in advance.

You're doing fine..  As you know and stated, it's a learning experience.

I'm sure if they're a reputable hard wood dealer, they'll have maple and walnut..  Those are pretty much standards along with cherry and mahogany.

It's perfectly ok to ask the sales people for help, that's part of their job.  Ask them if they'll give you 2' of that board.  Mine will but, yours may not.  All you can do is ask.

As for pricing, you'll find different pricing everywhere you look.  Once you learn your local dealer, you'll know what's a good deal and what isn't.  Once you use your local dealer for a while, you'll probably find that they give you a break in the prices as well.  That's a pretty standard practice.

  This is just a suggestion, it doesn't always work!   Find the manager, tell him the truth, that you don't have a clue! and see if he's willing to help.  If he's not, I'd find a different source!  Tiods [kev] gave you almost the same advise.. it never hurts to be honest! In fact, it may help in the long run!

  • Author

I think we only have one lumberyard in the area that sales hardwood. So what are those numbers 1-99 100-999 1000+?

Is cherry and mahogany a decent price as well?

If you're trying to make friends at the yard (recommended) you'll just buy the whole board and use whatever you have left over for another project down the road.  If you don't care about friends, go ahead and ask them to cut it.  They very well might do it for you, but they don't want to.

The different numbers are variable pricing based on how many board feet you buy.

  • Author
2 minutes ago, Eric. said:

If you're trying to make friends at the yard (recommended) you'll just buy the whole board.

The different numbers are variable pricing based on how many board feet you buy.

Guess it wouldn't be too expensive buying 1 of anything.

Thanks for info on numbers.

one more question for y'all. For a cutting board does it matter about flat, rift, or 1/4 sawn? I'm guessing you can ask for specific cuts or do they just give you what they got?

  • Author
3 minutes ago, wdwerker said:

The quantities you need put you in the highest price range. Maple, soft and hard, walnut,& cherry work well for cutting boards.

What about Mahogany?

When you're looking for smaller quantities, that's what put's you in the higher price range.  It's all relative.  A small amount of 8/4 walnut or maple (or mahogany) probably isn't going to break anyone's bank.

As for your question, no, I would not spend extra on specialty cuts.  Assuming you'll do your cutting board in end grain, you'll never see those cuts anyway.

Yeah what they said. .

Especially, buy the whole board.  You will use it, that's about a dang guarantee.  Walnut and maple they really should have in Stock.  Keep in mind that you don't want cool looking swirling grain and "rustic" knots that seem to bring a premium these days in walnut for a cutting board. It is burried when you flip the ends. 

I have used maple, walnut, cherry, qswo,purple heart, padeuk, mahogany, and a few others when making end grain boards.  Effectively sealing the larger pored species is a bear but they sure look cool. 

  • Author

I am doing end grain. Wanted to do Marc S. end grain with Purple Heart and maple but didn't know if they had Purple Heart and wanted to keep it as simple as possible first time in there.

 

thank you everyone for your help

The mill I go to usually has what they call shorts. They are the cutoffs from trimming longer boards. They are usually discounted to get rid of them. In my neck of the woods the guys that work at the hardwood places are wood workers as well and are more than glad to help. Don't sweat it you'll be fine.

Everyone has given great advice so far.

Going to the hardwood lumber dealer for the first time does seem a bit intimidating. However, as others have said, just ask for help and ask your questions. If they are rude and don't want to deal with you, leave and go somewhere else. Its just not worth your time and money to deal with rude people. Hopefully they will be kind and you can start to establish a good relationship with them.

Take your time, look through all of the species of lumber they carry, their thickness, length, quality (grading). You will start to get the lay of the land and each trip after will get more familiar and easy. As woodbutcher mentioned also, shorts are always a good way to save some money if you don't need a long piece.

A

The place I went to today will cut off as much of a board as you want so long as they still have 6 feet left afterwards. Me being me, the only cut I asked for was to cut a 10' curly maple piece in half so it would fit in the truck better. I had to find an "affordable" piece of purpleheart at only 4 bf or else I'd have had to do some more cuts. They had zero problems making as many cuts as I wanted. Now whether that was because I had $200 in other stuff (it was a woodworking store like Rockler on steroids) already at the counter and was buying $100+ in wood and advised them that I'll be in next month to buy the Festool 150/3 - or they are just super nice I cannot say. We hung out talking for about an hour so I think they are just very friendly. I asked to move in. 

The other place I go to doesn't cut anything as far as I know. 

If you are just going to be making cutting boards I would ask them if they have any "shorts" in what ever your looking for. I know where I get my lumber he will sell shorts for a whole lot cheaper per board foot then say a cherry 5/4 board 8 ft. long. At his place anything under 3 ft. long he sells as shorts...................

We were all lumber yard virgins at one time. There are some places, damn them, that will take advantage, and others thank goodness, that will be understanding, gentle and helpful. You'll remember which is which in the future. Screw the bad guys and develop a relationship with the helpful ones. I went to a grass farm one time and told them I wanted some grass patties. They all looked at me and said we don't sell patties, we sell sod. Good luck to Ya!

27 minutes ago, Gary-ks said:

If you are just going to be making cutting boards I would ask them if they have any "shorts" in what ever your looking for. I know where I get my lumber he will sell shorts for a whole lot cheaper per board foot then say a cherry 5/4 board 8 ft. long. At his place anything under 3 ft. long he sells as shorts...................

All the "shorts" in my local store are 4/4 and usually 5' long..  Good point tho!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.