treeslayer Posted March 26, 2016 Report Posted March 26, 2016 my son is looking for a new TS after his current one died, he's looking at a Laguna Fusion 36" 110 volt model. just wondering if anyone has any feedback, info on this machine. i don't think he has unlimited funds, much like the rest of us but something south of $1500.00 is where he's at, thanks in advance Quote
wtnhighlander Posted March 26, 2016 Report Posted March 26, 2016 I hope you meant BS, not TS....a 36" tablesaw would be downright scary! ? Quote
Brendon_t Posted March 26, 2016 Report Posted March 26, 2016 11 minutes ago, wtnhighlander said: I hope you meant BS, not TS....a 36" tablesaw would be downright scary! ? That's called a sawmill. But the fusion is indeed a table saw with a 36" rip capacity. I saw one at rockler the other day and it seemed like a nicely put together tool. Never used one or heard a review. Just checked it out. Quote
treeslayer Posted March 27, 2016 Author Report Posted March 27, 2016 my bad ross, 36" rip, standard 10" saw, not enough coffee to be thinking straight Quote
RichardA Posted March 27, 2016 Report Posted March 27, 2016 25 minutes ago, treeslayer said: my bad ross, 36" rip, standard 10" saw, not enough coffee to be thinking straight Is it still morning in Iowa Dave? Quote
minorhero Posted March 27, 2016 Report Posted March 27, 2016 No experience with the saw at all but here is a pretty thorough review: https://www.canadianwoodworking.com/laguna-fusion-table-saw Quote
treeslayer Posted March 27, 2016 Author Report Posted March 27, 2016 1 hour ago, RichardA said: Is it still morning in Iowa Dave? i drink that stuff all day rick, would use an IV drip but the tube would get in the way when i'm woodworking! 26 minutes ago, minorhero said: No experience with the saw at all but here is a pretty thorough review: thanks minor that's a great review, will pass it along to my son Quote
jussi Posted March 27, 2016 Report Posted March 27, 2016 My local Rockler has them on display. You may want to see if your branch carries it. I didn't inspect it very thoroughly but it seemed very light weight. Perhaps it wasn't set up properly but the one rocked with very little pressure on either of the wings. Quote
knotscott Posted March 28, 2016 Report Posted March 28, 2016 The Laguna Fusion hybrid and the Baileigh hybrid look to essentially be the same saw. The Jet Proshop has nearly identical trunnions under the hood....he can take a look at the online parts diagrams to check for himself. Worth noting is that the Fusion and the Baileigh offerings use a t-square fence that has a two-piece aluminum front rail. The Jet Proshop offers a t-square fence with a single piece steel front rail, which is a better design IMHO. I'd opt of the Jet over the Laguna for the steel rails and their better CS track record. Jet might have a longer warranty too. If he has 220v, the Grizzly G0690 or G1023RL are in another league....every aspect of an industrial cabinet saw will be more robust than the hybrid saws. He doesn't necessarily need a beefier saw, but since they're in a similar price range, the Griz cab saws offer a much better value IMO. Laguna fence: Quote
Eric. Posted March 28, 2016 Report Posted March 28, 2016 I find it difficult to justify any new saw purchase these days other than the Grizzly 0690 on the low end and the 3hp SawStop PCS on the high end. Nothing else in between seems to make sense with those two models in the equation. 1 Quote
Ronn W Posted March 28, 2016 Report Posted March 28, 2016 I have a Laguna 10" Fusion saw. 36" rip capacity. If has been a good saw for the money. Laguna support is excellent - Actually it is awesome. My main reason for choosing the Laguna was that other saws seems to have either 30" or 54" rip capacity. I did not have room for 54" and 30" was not enough for cabinet work. I have been happy with it. Do get a zero clearance insert though. The standard insert is too flexible. 1 Quote
Ryan Grondin Posted August 2, 2016 Report Posted August 2, 2016 I have one and love it. No complains so far, once you go through and adjust it right, mine was close to perfect, I was just being picky, but it is dead on now. If he gets one I think he'll enjoy it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.