Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Douglas fir box

Featured Replies

  • Popular Post

Here's a nice Fir box with coopered lid.This is reclaimed wood from the doors i posted about in the wood section.I though the vg grain was going to be my favorite but i kinda like the small cathedral grain in the flat sawn.So much more character.The wood was so dry it was a pain to work.I have enough to make 2 or 3 more the same size if i don't goof up.Anyways the finish is spar varnish mixed with turpentine 50 /50.    

Thanks for looking Aj

 

Fir box.jpg

Dougfir box.jpg

  • Author
3 hours ago, shaneymack said:

Very nice AJ ! What are the dimensions ?

The box measures 8 1/2 tall 10 3/4 front to back and 14 wide.Its a odd size I just wanted to use up as much of the wood as I could.Thanks everyone for the replies.

 

Good job. How did you get the curve in the top?

Good job. How did you get the curve in the top?

The original post says the lid is coopered, which means that it was a flat board that was cut into strips with a slight miter along the length. It's similar to a barrel. Looks like it was sanded smooth once it was glued up.

17 minutes ago, Arrdenet said:

The original post says the lid is coopered, which means that it was a flat board that was cut into strips with a slight miter along the length. It's similar to a barrel. Looks like it was sanded smooth once it was glued up.

Thanks sir. Being a Cooper, you would think I would know my background better?

  • Author

Now that's funny Mr Cooper.This was my first box with a coopered lid.Im not sure if it was my glue or the dryness of the wood but I had to remake it 1 1/2 times.Its hard to get good pressure on the pieces wih the angles.I used the same tech as segment turning.Using packing tape.

The top was handplaned and the side were scraped.Sand paper is the last resort.

2 hours ago, Arrdenet said:

The original post says the lid is coopered, which means that it was a flat board that was cut into strips with a slight miter along the length. It's similar to a barrel. Looks like it was sanded smooth once it was glued up.

I figurd he meant he Kcooper'd it also being he glued up a flat panel and that's how it turned out.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.