Ronn W Posted June 3, 2016 Report Posted June 3, 2016 I just made a zero clearance insert out of 1/2" baltic birch with set screws threaded into the plywood for ht adjustment. All looks well but I was wondering what finish I could use so that my work slides easily? I was thinking Arm R Seal and then wax. Whaddaya think? I don't have enough depth to glue some plastic laminate unless I remake it using 3/8" plywood. Quote
Popular Post ..Kev Posted June 3, 2016 Popular Post Report Posted June 3, 2016 I usually just wax them.. Frankly, I don't really care what they look like.. 7 Quote
rodger. Posted June 3, 2016 Report Posted June 3, 2016 I used three coats of minwax wipe on poly, followed by wax. Works great! Quote
Chestnut Posted June 3, 2016 Report Posted June 3, 2016 I usually use the end of the poly from what ever project I'm working on at the time and then wax. Quote
toddclippinger Posted June 3, 2016 Report Posted June 3, 2016 I use Bostik GlideCote directly applied to solid wood and plywood fences all the time. You can do the same with wax, I just happen to use GlideCote, the finish underneath is optional. It's builder's choice! Quote
drzaius Posted June 3, 2016 Report Posted June 3, 2016 I just used some left over rattle can lacquer followed by GlideCote. Any kind of wax will do, as long as it contains no silicone. Quote
pkinneb Posted June 3, 2016 Report Posted June 3, 2016 No help on the finish but nice job on the insert!! Quote
wdwerker Posted June 3, 2016 Report Posted June 3, 2016 +1 for rattle can laquer and Glidecoat. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.