Recommended Posts

Posted

Next up, 60 volt shoes, pick up any tool and use it, as long as you got your power boots on.

I'm kinda happy for DeWalt, since Milwaukee goes around strutting their stuff like they are the king of innovation all the time. 

  • Like 1
Posted

I'm a bit surprised that battery tools are moving into 60 volts and higher. OSHA requires a great deal more protection for the user when voltages exceed 48. Of course, that is general industry rules, construction is often a lot more lax. I guess construction workers are disposable. ?

Posted
56 minutes ago, wtnhighlander said:

I'm a bit surprised that battery tools are moving into 60 volts and higher. OSHA requires a great deal more protection for the user when voltages exceed 48. Of course, that is general industry rules, construction is often a lot more lax. I guess construction workers are disposable. ?

I think it's a trick of the series parallel of individual cells in the battery and there is a computer that switches between them In the fine print it says that each battery when tested across the electrodes registers 20V, 18V nominal. There is something fishy going on here but if it works, cool.

  • Like 1
Posted

Certainly the cash flow in cordless tools is the batteries; like printers and ink cartridges.  I enjoy seeing any advances in battery technology since I think this will be key to alternate power sourcing in our future.  For folks on the job site with an array of battery powered tools I could see this helping them consolidate what they have to haul to work.

Posted
Next up, 60 volt shoes, pick up any tool and use it, as long as you got your power boots on.

I'm kinda happy for DeWalt, since Milwaukee goes around strutting their stuff like they are the king of innovation all the time. 

I'm thinking more along the lines of an exoskeleton with CNC abilities, and detachable tool "gloves". Drill, drive, and route with fingers on one hand, Saw or plane with the other.

Stark industries should have the "Woodworker Mark I" to market in a couple years!

Then Festool will release a green & black model, with belt-mounted domino attachment, just for Shane!

Don't laugh too hard, this stuff is becoming real pretty quick. http://www.army-technology.com/projects/raytheon-xos-2-exoskeleton-us/

  • Like 1
Posted
11 minutes ago, Tom King said:

Pretty soon, they'll probably be making tools that use a high enough voltage that they can be plugged directly into a wall outlet.

Apparently these new Dewalts CAN be plugged directly into a wall outlet if you run out of batteries, using a especial cable.

From: http://www.popularmechanics.com/home/tools/how-to/a21450/dewalt-flexvolt/

"Dewalt wants to eliminate any battery charging downtime, so it has launched a corded adaptor that slides into the battery terminal on the Flexvolt tool and plugs into a 120V AC wall outlet. This handy accessory removes any fear of running out of battery and provides the most flexibility of any cordless tool available. "

Posted
13 minutes ago, Tom King said:

Pretty soon, they'll probably be making tools that use a high enough voltage that they can be plugged directly into a wall outlet.

Touché! Imagine that! Unlimited power and no recharge time!

Uh oh, here come.the Excessive Use of Exclamation Point Police....

Posted
54 minutes ago, Robby W said:

Touché! Imagine that! Unlimited power and no recharge time!

Uh oh, here come.the Excessive Use of Exclamation Point Police....

I don't think we need these tools. But contractors will love them. Imagine being able to use a table saw or a 12" miter saw anywhere at the work site. Because running long extensions cords maybe against the regulations and subject to increased liability. In short, if a baby chews the extension cord, you go to jail. If someone confuses the extension for twine and attempts to build a quantum particle analyzer with it, you go to jail, etc, etc, you go to jail :o

Posted

If I was still a contractor I would buy these. My concern is that there is only a certain amount of energy in a battery. If the power is pulled out at three times the voltage ie. 20 volts at 60 volts then my simple mathematics says the battery will last 1/3rd the time and also the discharge being faster should heat the cells and possibly damage them? I am not a chemist so can not say this is definite. 

The cord is a very good idea. 

Now all we need is for Festool to create a shop vac that has banks of batteries plugged into it and it could be used to power the hand tool. We still need to be connected via dust hose so the tool can stay corded. The shop vac could also be a charging station so when you stop for lunch, all of the batteries would be ready when you get back into it.

 

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 66 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined