collinb Posted June 28, 2016 Report Posted June 28, 2016 As I shop every so often I find one of those things that I've never seen before. http://columbus.craigslist.org/tls/5641220555.html Anyone here use/used one? Opinions? Saw some discussion in another forum and it was generally positive, along with the need for extra caution based on the design. Quote
midtnwoodworker Posted June 28, 2016 Report Posted June 28, 2016 I have never used or even seen one for that matter. Just looking at it though my biggest concern would be the lack of infeed/outfeed support. Quote
Immortan D Posted June 28, 2016 Report Posted June 28, 2016 That's for edges and only for edges, right? Quote
collinb Posted June 28, 2016 Author Report Posted June 28, 2016 19 minutes ago, Immortan D said: That's for edges and only for edges, right? Seemingly not. Quote
Immortan D Posted June 28, 2016 Report Posted June 28, 2016 5 minutes ago, collinb said: Seemingly not. I thought edges because pushing the face of a board against that fence doesn't seem practical or even safe. Quote
Tpt life Posted June 28, 2016 Report Posted June 28, 2016 31 minutes ago, Immortan D said: That's for edges and only for edges, right? Sure seems that way. Maybe end grain too. 1 Quote
Andy Wright Posted June 28, 2016 Report Posted June 28, 2016 looks like you can slice deli meat with it too... Quote
Immortan D Posted June 28, 2016 Report Posted June 28, 2016 Looks like something you may wanna use after ripping with your RAS LOL 1 Quote
gee-dub Posted June 28, 2016 Report Posted June 28, 2016 Makes me cringe but, a lot of the things I do make other people cringe. If you are familiar with the tool and use the established safety methods, all should be well. So the edge quality is reliant on the miter gauge or is the stock resting against the cutter supposed to be part of the guiding system? Quote
Janello Posted June 28, 2016 Report Posted June 28, 2016 I dunno much about it, but it looks like an invention to fix a problem that never existed. Quote
wdwerker Posted June 28, 2016 Report Posted June 28, 2016 I saw a demo way back in the day. They were able to trim the end of matchstick sized pieces . I even considered getting one but they weren't on the market that long. Limitations on size and length was what made me hesitate . Seems like I remember it wasn't cheap either. Quote
Tom King Posted June 28, 2016 Report Posted June 28, 2016 I remember seeing them in advertisements, but they never caught on. I never wanted one. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.