Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Getting the most of domino 500

Featured Replies

Received my used domino kit in the mail yesterday, and clearly been messing about with it the last two nights. I'm not so much looking for videos or info on how to change bits etc, but effective methods of using the machine to its fullest potential. Paul marcel had a bit of this when it comes to installing plywood shelves and centering the mortises, but I would like more. Also, does everyone use this tool south paw? I can't fit my right hand in between the dust port and the body of the tool. 

I hold the thing down with my left hand, with my right hand near where the power cord attaches.

I'm guessing you've seen this based on your thread title...

But.. http://www.festoolusa.com/Web_files/Getting_the_most_from_the_Festool_Domino_Machine.pdf

The Paul-Marcel videos are great, watch some of his builds for other ideas...

 

I'm with you.  Even with a project and 40 something dominos, I'm still getting the hang.  Learning how to line it up and keep it there through turning it on took a few trials.

I had the same problem with the dust port. I constantly get half way through a plunge and then have to adjust my hand back.

I can't quite figure out how the centering attachment is supposed to help me in rail and style construction. If i can't use the guide on the edge grain piece how is the centering thing helpful? I guess there is end to end joining but how many people actually do that?

14 minutes ago, Chestnut said:

I can't quite figure out how the centering attachment is supposed to help me in rail and style construction. If i can't use the guide on the edge grain piece how is the centering thing helpful? I guess there is end to end joining but how many people actually do that?

I agree.  I have used this feature a few times, and i like it, but it's uses are very limited.  In the previous version, the paddles were pins, and a pin could be inserted into a previous mortise for repeat cutting.

I guess the dust port takes some getting used to.  I grip the barrell with just my finger tips.  Its more inportant to have a good grip on the fence handle.  If you have that nice and sturdy, you shouldn't need a death grip on the barrell.  

46 minutes ago, Mike. said:

death grip

Not sure why so many people are gripping so far up. Most people that have problems with the Domino either grip too far up, or use the death grip. Plant the fence, and plunge in softly with your hand on the rear of the tool. Any other method has the potential for inaccuracies. 

  • Author
10 hours ago, Llama said:

I hold the thing down with my left hand, with my right hand near where the power cord attaches.

I'm guessing you've seen this based on your thread title...

But.. http://www.festoolusa.com/Web_files/Getting_the_most_from_the_Festool_Domino_Machine.pdf

The Paul-Marcel videos are great, watch some of his builds for other ideas...

 

I havent, a mere coincidence with the title! I will have to read that PDF thoroughly. I guess i was looking for ways to use the machine besides the basic fence positions. For example, if the machine maxes out at a fence depth of 20-25mm, how would you accurately position a mortise in 2-3" wide/thick stock? Thoughts on using the domino in a vertical position? So far, I already learned to lock in the on switch prior to even lining things up. The machine jumps anyways when you turn it on, so it usually requires repositioning. After it is on, it is easier to grip it towards the cord and plunge. I am getting better results with my left hand plunging.

 

It seems nice so far, but i feel like the 700 might have been the better purchase. Owell, $650 for the kit and a decent systainer of dominoes. No 8mm or 10mm dominoes though : (

Also, this wrench has to be the easiest thing to lose. it is beyond tiny. 

IMG_2850.JPG

IMG_2849.JPG

1 hour ago, Llama said:

Not sure why so many people are gripping so far up. Most people that have problems with the Domino either grip too far up, or use the death grip. Plant the fence, and plunge in softly with your hand on the rear of the tool. Any other method has the potential for inaccuracies. 

I know i end up gripping so far up because it's where the machine widens out. I loosely grip the point where i don't have to death grip it. I can't really call it a criticism for the designer but the widening part could have been a bit further back to prevent this issue. Also it's the same hand position from when my thumb hit the power button.

1 hour ago, Pwk5017 said:

It seems nice so far, but i feel like the 700 might have been the better purchase. Owell, $650 for the kit and a decent systainer of dominoes. No 8mm or 10mm dominoes though : (

Also, this wrench has to be the easiest thing to lose. it is beyond tiny. 

 

Thought that about the 700 as well but then i remember how  BIG the 700 is. They have one on display at acme and it's a beast. I keep the wrench in the systainer along with the centering attachment. The biplane wings and the bottom face are almost always on my bench and being used.

Jealous of that price btw.

To use the Domino in a vertical position you clamp a board along a line, put the machine against the board and cut the mortice. I,turn the machine on then position it.

To place a panel in the middle of a board you clamp it flat along a line for one side of the panel. Then plunge cuts into the board. Next you cut into the end of the panel at the same marks. When the panel is swung up to 90 degrees the bottom of the panel will locate along the line. You are using the bottom of the machine as a reference surface instead of the fence.

Buy a Domiplate by Seneca !                                                                          Great accessory for using 1/2 " and 3/4" thick material. I add 2 pieces of Formica under it and use it for 5/8 Baltic birch ply drawers. 5/8 Baltic is actually 15 mm, use a 5 mm domino and it's almost perfectly centered.

14 minutes ago, Chestnut said:

Also it's the same hand position from when my thumb hit the power button.

I turn it on, plant my fence hand and kind of hold the power cord and push. 

2 minutes ago, Llama said:

I turn it on, plant my fence hand and kind of hold the power cord and push. 

Agreed.  I really haven't had a problem with the machine jumping around when plunging into the end or edge of a board..  As long as you plant the fence firmly, turning the machine on should not cause it to jump.  

I hold end of the machine around the cord end. Repeated flexing and stress will  kill the cord eventually, that's how I found out how much a new one costs ! It did take a few years and I use my Domino almost daily except when finishing. 

I almost always turn on the machine then put it in place on the mark, hold firmly then push in a very straight motion. Any Angled  pressure upwards or downwards on the tail of the machine will very slightly affect the cut.

I'm left handed.  I use the right hand up by the switch and plunge with my left hand at the very back of the tool. It helps to push slowly but with steady pressure. There used to be a number of videos on the Festool web site with tips on using the Domino. While you are limited,on the depth and thickness, if you make your own dominos you can get quite a bit wider than the standard sizes. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.