Recommended Posts

Posted

Needing a new brad nailer. Tired of borrowing...

I got to use a senco and loved the oil free design. I've used others in the past that needed oil but I don't have time for the upkeep of them or do I always remember to oil or remember where it is. So oil free won me over haha.

I was thinking maybe this one?? Unless others have feelings on oiled nailers or other non oiled nailers.

720a13c2dc8611e34aafb37029c48cb8.jpg

Thoughts?

Posted

Senco is a good way to go.  One of the nice things about Senco is they are designed to be easily repaired by the consumer.  If down the road you are having problems with the performance of the brad nailer, other then a jammed brad, they have these kits you can purchase that allows you to do a simple tear down of the gun and the kit has all of the parts that should be replaced to get you up and running again.

  • Like 2
Posted

I bought a few hitachis during the Prime day sale where the 21 and 18 were 50%+ off. I agree, I think senco is considered among the top in the nailer world. Assuming you dont want to spend $200+ on a grex. I dont use a nailer often, so i wanted OK and as cheap as possible. for $40 a piece, the hitachis served that need for me. 

 

For the record, the oil really isnt a pain to apply or remember to use. Drop or two before you connect the gun and you are good to go for awhile. 

Posted

Will the Sencos shoot themselves dry?  My rigid 16ga gun always leaves the last like 10 nails in it waiting for you to feed it more and that drives me a bit nuts.  My big framing nailer doesn't act this way. 

Posted
Will the Sencos shoot themselves dry?  My rigid 16ga gun always leaves the last like 10 nails in it waiting for you to feed it more and that drives me a bit nuts.  My big framing nailer doesn't act this way. 

This. Dry fire lockout is always on top of my list when buying a finishing gun

Sent from my SM-N910W8 using Tapatalk

Posted

They all need oil, some just need more then others. once every few uses put a couple of drops in, it avoids problems .  if you don't you will notice more jams. this has been my experience with all nailers.

Posted
They all need oil, some just need more then others. once every few uses put a couple of drops in, it avoids problems .  if you don't you will notice more jams. this has been my experience with all nailers.

Oiless nailers do not require any oil from what I understand. I think you can actually mess them up by oiling them.

Sent from my SM-N910W8 using Tapatalk

  • Like 1
Posted
40 minutes ago, xxdabroxx said:

Will the Sencos shoot themselves dry?

Yes, and sometimes that is a pain because you don't notice it and you have to go back over it

 

10 minutes ago, minorhero said:

 

They all need oil,

 

No, Senco's do Not use oil.  

Posted
Oiless nailers do not require any oil from what I understand. I think you can actually mess them up by oiling them.

Sent from my SM-N910W8 using Tapatalk

That was my understanding too. Otherwise they couldn't call it oiless nailers

Posted

FYI Senco has a 3 gun combo with a 15ga, 18ga and 18ga stapler and with Acme's 15% off sale today it is $170 shipped.  Now they are out of stock but it should ship within a couple of weeks.  

I said $170 shipped but it would be just over $176 shipped, they offer free shipping at $199 and I had something else in the cart and was thinking free shipping started at $100

Posted

In actual practice I have found that ALL nailers use oil. My friend has a senco, swears by them but also puts a few dots of oil in every so often. Well used nailers jam more often without oil.

Posted

Point of fact, oil in an oiless nailer can cause catastrophic failure. I have seen it. Gamble if you like. Tool oil is made to blow through and will leave oil on your product for the first hundred nails or so. I have run oiless Senco and Dewalt for 16 years (ten of which as daily users shooting trim) with no reliability issues. Rebuilds after five years or so are super easy and cheap as well. One further thought, if you oil an oiless and suffer a failure, you voided the warrantee. 

  • Like 2
Posted
1 minute ago, bushwacked said:

Didn't even know there was such things as these rebuild kits but every 5 years or so sounds good to me!

Yea  I had mentioned it up in my first post here Drew. ;)

Carus is correct, and unless I am mistaking it states in the manual not to oil.  My guns or over 20 years old never had a problem but I don't use them on a daily basis but they have gotten used. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 53 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined