Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Epic Craigslist Score!

Featured Replies

Snagged this router table/cabinet tonight for $20. A little cleanup and a new fence and this thing will be nice to have!

4be4f967b512b4706c7908772c90c7f2.jpg

Looks like it has been around the block once or twice but, it's a killer start for 20 bucks!

  • Author

It's a little rough around the edges but for $20, I can rehab it a bit and get good use out of it

Nice snag! We use to say that back in the late 60's when a buddy didn't have to go home by himself:)! How times have changed! 

  • Author

It's set up for a porter cable router. My router has a bigger base so I'll need to route the recess underneath a bit and drill some different holes for mounting but I'm just happy to have a cabinet where I can organize my router bits and stuff.

Or just pick up the PC router..  Super nice router in a table and you did save a few bucks ;)

 

Coming form someone that uses what ever he has on hand for shop stuff I like it for $20. 

Looks like it might be Norms design... Or something not far removed.

Sent from my Nexus 5 using Tapatalk

  • Popular Post
7 hours ago, MisterDrow said:

It's set up for a porter cable router. My router has a bigger base so I'll need to route the recess underneath a bit and drill some different holes for mounting but I'm just happy to have a cabinet where I can organize my router bits and stuff.

Nice.

It's hard to tell what the top is made out of but I would cut a hole for a  router plate.  That way you would be set up for a lift in the future. 

  • Author
4 hours ago, Just Bob said:

Nice.

It's hard to tell what the top is made out of but I would cut a hole for a  router plate.  That way you would be set up for a lift in the future. 

It looks like part of a counter top... not quite MDF but more dense than particle board. I think I will do the plate instead of adjusting the hole in the underside to fit my router. Are they pretty universal?

12 minutes ago, MisterDrow said:

It looks like part of a counter top... not quite MDF but more dense than particle board. I think I will do the plate instead of adjusting the hole in the underside to fit my router. Are they pretty universal?

I have always used ones that were "blank" and drilled them to fit my router.  Some are proprietry you will have to check.  

18 minutes ago, MisterDrow said:

It looks like part of a counter top... not quite MDF but more dense than particle board. I think I will do the plate instead of adjusting the hole in the underside to fit my router. Are they pretty universal?

There's a couple of different sizes. There's a really cheap black plastic one that a few places sell. I had one, but it wasn't all that flat. The Kreg one is nice, although it'll cost more than your table did - that's what I replaced it with, but I couldn't have put it in the same hole since it was a smaller size.

A big router in a lift is a bigger investment but such a joy to use. Some routers have above the table adjustments built into them. They don't work as good as a lift but so much easier than having to reach under repeatedly t get the height set exactly.

  • Author
4 minutes ago, wdwerker said:

A big router in a lift is a bigger investment but such a joy to use. Some routers have above the table adjustments built into them. They don't work as good as a lift but so much easier than having to reach under repeatedly t get the height set exactly.

Eventually I'll go that route. Gotta work with what I've got for now. I've been adjusting my router under the makeshift table I made a while back for a while now and I don't mind it thus far. I really like the notion of a lift, though, and look forward to that day.

Nice find !

When you pick your plate, use one that is the same size as the lift you will eventually get. That way you won't have a hole that is larger than the lift. Don't ask me how I know this....

Aluminum plates are better than phenolic or plastic - they are more rigid.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.