Greg Short Posted December 17, 2016 Report Posted December 17, 2016 Rollers will not turn my Dewalt planer Quote
Denette Posted December 17, 2016 Report Posted December 17, 2016 Rollers will not turn my Dewalt planer What model is it? And what are the circumstances of the rollers not turning? You'll definitely find good help on this forum, and you'll get it faster with more details. Quote
Brendon_t Posted December 18, 2016 Report Posted December 18, 2016 53 minutes ago, Greg Short said: Rollers will not turn my Dewalt planer Yeah that's not enough info to even say congratulations to. Can you tell us more Quote
mat60 Posted December 18, 2016 Report Posted December 18, 2016 I have a 733. Can a 735 be put in between speeds. Quote
Brendon_t Posted December 18, 2016 Report Posted December 18, 2016 Yes. The 735 has a high and a low speed Quote
wtnhighlander Posted December 18, 2016 Report Posted December 18, 2016 And if you switch the speed lever while it is NOT running, the drive chain will often not engage, so the rollers don't turn. Always switch speeds while it is running. 1 Quote
Greg Short Posted December 18, 2016 Author Report Posted December 18, 2016 OK I was using the plane or the wood started getting stuck and then the plane or turned off I hit the reset button and now the rollers will not turn at all Quote
Greg Short Posted December 18, 2016 Author Report Posted December 18, 2016 1 hour ago, Brendon_t said: Yeah that's not enough info to even say congratulations to. Can you tell us more It's a 735 I was running with through it it started to get hard to come out on the other side and then the machine shut down and the rollers have not worked sinceIt's a 735 I was running with through it it started to get hard to come out on the other side and then the machine shut down and the rollers have not worked since Quote
Greg Short Posted December 18, 2016 Author Report Posted December 18, 2016 Yeah I took the covers off and looked at the chains they were both still in one piece is there anything else I should check Quote
Greg Short Posted December 18, 2016 Author Report Posted December 18, 2016 35 minutes ago, treeslayer said: broken drive belt/chain Is there anything else that turns the roller beside the chains I also read it could be a sprocket or bushing Quote
wtnhighlander Posted December 18, 2016 Report Posted December 18, 2016 Same motor turns blades, rollers, and chip ejector fan. If blades are turning, rollers aren't, but chain isn't broken, you may have a stripped gear, or a bad bushing that prevents gears from meshing properly. Take off the top as for a blade change. You may need to open / remove a cover on the back side of the motor to see everything. Quote
Greg Short Posted December 18, 2016 Author Report Posted December 18, 2016 Ok will see if I can see anything by doin that Quote
Dave's Not Here Posted December 18, 2016 Report Posted December 18, 2016 Clean the rollers and wax the tables. Quote
Tpt life Posted December 18, 2016 Report Posted December 18, 2016 Take a spin through this. You'll see that the sprockets are on shafts with keys. I would suspect some binding due to a partially shorn key or some such. It is also possible you have a wood chip stuck on a hidden part of the system. This is one of several fairly detailed videos of some disassembly and assembly. Quote
Greg Short Posted December 19, 2016 Author Report Posted December 19, 2016 Thank you just wish I could find video on taking out rollers Quote
Popular Post Coop Posted December 19, 2016 Popular Post Report Posted December 19, 2016 1 hour ago, Greg Short said: Thank you just wish I could find video on taking out rollers That would be the stage where my repair abilities stop and DeWalt service center begins. 4 Quote
Greg Short Posted December 20, 2016 Author Report Posted December 20, 2016 Dug into it a little bit more when I pulled the sprockets and the chain off the roller Spohn when I put it back together they didn't spin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.