Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

water based finishes

Featured Replies

hey guys i've been working with baltic birch plywood quite a bit and i've noticed any of the oil based products end up yellowing the wood which doesn't always look that attractive. I don't think that i'm going for a pure white wood, normally I like warmth in the work but the yellow i've gotten from oil based poly and shellac aren't that attractive.  

I've tried water based poly urethane and it didn't yellow it but it's a little to un-natural/heavy duty for my work. Have any recommendations of things to try that will make the wood look rich/dynamic but not yellow it? 

found this list http://www.rockler.com/finishing/finish/clear-water-based-finish never tried general finish top coat but might give that a go next 

  • Popular Post
19 minutes ago, Mike. said:

Blonde or Super Blonde Shellac

What Mike said.  You could also go with the shellac and then follow with a light coat or two of wipe on poly if you want a little more durability. 

Good source for shellac flakes Wellermart shellac

I'm in the same boat.   I have slabs with absolutely wonderful figure that oil just muddies.  So far the only "finish" that doesn't occlude the grain and color is epoxy, which I do not prefer for a number of reasons (bubbles, plastic look...)

I will also try shellac.  To Chet's point, wouldn't the follow-on poly also yellow the piece?  

 

+1 to what Mike and Chet said. Super blonde will and a slight color while highlighting the wood. 

Lacquer is another good choice. Its a pretty easy finish to get nice, and adds just a bit of warmth to lighter woods without yellowing too much.

Sent from my SAMSUNG-SM-G890A using Tapatalk

17 hours ago, Chet K said:

What Mike said.  You could also go with the shellac and then follow with a light coat or two of wipe on poly if you want a little more durability. 

Good source for shellac flakes Wellermart shellac

If the application is for wood with figure and color, do any of these coatings protect against UV caused fading?

General Finishes has a water bourne exterior finish with UV protection. Not many interior finishes will have UV resistance. Marine spar varnish is awful on furniture. It drys but stays soft to cope with the temperature changes and exposure on a boat.

5 minutes ago, wdwerker said:

General Finishes has a water bourne exterior finish with UV protection. Not many interior finishes will have UV resistance. Marine spar varnish is awful on furniture. It drys but stays soft to cope with the temperature changes and exposure on a boat.

Well, I don't suppose I can have everything, and my application is interior on a North facing wall.  I think I'll try the Super Blonde Shellac.  If it fades, I'll learn to appreciate the subtleties.

  • Author
What Mike said.  You could also go with the shellac and then follow with a light coat or two of wipe on poly if you want a little more durability. 

Good source for shellac flakes Wellermart shellac

I've tried the clear shellac and that yellows if. I'll have to order some blonde or super blonde my hardware store doesn't carry it, only clear and amber

Sent from my iPhone using Tapatalk

I already have my order from Wellermart - they were fast (also in my neck of the woods.)  

Of course I won't know about yellowing for a while!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.