Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Zebrawood finish

Featured Replies

This isn't a typical question. I have a phone that has a Zebrawood back. I didn't know when ordering that the wood is unfinished.

I suspect that even with clean hands, the wood will eventually absorb skin oils and discolor in areas it is touched.

I would like to apply some kind of clear finish to prevent that, preferably one that results in the least change of appearance and am looking for recomendations

The wood is not sanded completely smooth and the grain is pronounced.

This back can be removed from the phone and the non-wood edges can be masked off fairly easily.

Attached is a picture if that helps.

 

 

 

 

 

Mozo-zebra-wood-Lumia-950-XL.jpg

If you're touching it constantly and getting scratches, you're not going to find anything better than Polyurethane like Arm-R-Seal. You could also try a water-based poly for minimal color-change.

Most other finishes (Shellac, Lacquer, Wax) are not going to be tough enough to stand up to constant handling like a phone.

Add I've never used zebrawood, I can't comment to the finishes but what kind of phone offers a real wood back?

  • Popular Post

A couple that come to mind

wood phone, 1.jpgwood phone.jpg

1 hour ago, K Cooper said:

A couple that come to mind

 

And just when I think we may possibly stay on track.

62309671.jpg

  • Author
4 hours ago, Eric. said:

Zebrawood with satin Arm-R-Seal...

 

DSC_0175_1.jpg

 

DSC_0167_1.jpg

Gorgeous! 

 

4 hours ago, BonPacific said:

If you're touching it constantly and getting scratches, you're not going to find anything better than Polyurethane like Arm-R-Seal. You could also try a water-based poly for minimal color-change.

Most other finishes (Shellac, Lacquer, Wax) are not going to be tough enough to stand up to constant handling like a phone.

I've never scratched a phone (knock on wood) and was just worried about staining but some extra toughness would be a plus!

Thanks for another vote for Arm-R-Seal

4 hours ago, Brendon_t said:

Add I've never used zebrawood, I can't comment to the finishes but what kind of phone offers a real wood back?

Aside from Cooper's, Several Lumias have replaceable polycarbinate backs and the aftermarket offers various options.

Mine is a 950XL (http://www.windowscentral.com/people-ask-why-i-use-lumia-950-xl-so-here-it)

I'm using my leather back, while deciding what to finish the zebrawood with.

 

 

WP_20170122_17_28_36_Pro.jpg

Some more thoughts.

I guess the only downside to Poly is that you would lose the "feel" of the wood. If you want to maintain that, a butcher block or saladbowl finish would give you just a little bit of protection without changing the texture. Drying oils (Linseed, Danish) would also offer protection, but they tent to change the color quite a lot.

  • Author
6 hours ago, BonPacific said:

Some more thoughts.

I guess the only downside to Poly is that you would lose the "feel" of the wood. If you want to maintain that, a butcher block or saladbowl finish would give you just a little bit of protection without changing the texture. Drying oils (Linseed, Danish) would also offer protection, but they tent to change the color quite a lot.

I would like to retain the feel but that is secondary to stain resistance from handling. I'm not worried about spilling something on it.

I'll research salad bowl and butcher block finish.

Color change from drying oils might be okay as long as I thought it was still attractive and kept a lot of contrast between the dark and light bands.

Thanks for all the ideas, everyone.

Drying oils do not provide much stain protection at all. They look great, but it will still pick up staining from skin oils, dirt, sweat, skittles & whatever else. A couple of coats of wiping poly (NOT glossy) will still look like natural wood & offer good protection.

  • Author
32 minutes ago, drzaius said:

Drying oils do not provide much stain protection at all. They look great, but it will still pick up staining from skin oils, dirt, sweat, skittles & whatever else. A couple of coats of wiping poly (NOT glossy) will still look like natural wood & offer good protection.

Thanks.

Will salad bowl finish protect from skin oil staining? I don't know if they are better than drying oil for stain protection.

I'll look into wiping poly. I assume you wipe it on, like salad bowl finish? Again, not that it would rule it out, but would the poly wipe be thin enough to still feel the grain thru it if you could before the finish?

Watco's Salad bowl finish is quite like a wiping varnish . I think the wiping varnishes are thinner which might let you feel the grain if used sparingly.

9 minutes ago, HoosierDaddy said:

Will salad bowl finish protect from skin oil staining? I don't know if they are better than drying oil for stain protection.

No.

Most salad bowl finishes contain non-drying oils & waxes. Any non-drying oil has the potential to transfer to your shirt pocket and you don't want that.

  • Author
4 minutes ago, drzaius said:

No.

Most salad bowl finishes contain non-drying oils & waxes. Any non-drying oil has the potential to transfer to your shirt pocket and you don't want that.

Sounds like wiping poly has the fewest compromises/downsides mainly it could effect the feel of the wood more. That is not a super high priority.

Do yourself a favor. Don't put any finish on the wood. I don't care what type of finish you apply. The oils/heat/moisture from your hands will break down the finish and you'll have a sticky nasty messy phone.

 

-Ace- 

56 minutes ago, drzaius said:

Drying oils do not provide much stain protection at all. They look great, but it will still pick up staining from skin oils, dirt, sweat, skittles & whatever else. A couple of coats of wiping poly (NOT glossy) will still look like natural wood & offer good protection.

As always, YMMV. I've got a knife block finished with Danish Oil. It gets handled frequently, and often spattered during food prep. I've yet to notice any staining, even from pasta sauce. Not the same use case as a phone, but I've had it a couple years now and haven't had any need to refinish.

5 hours ago, BonPacific said:

As always, YMMV.

Definitely true. A lot of drying oil finishes also have some poly in the blend, which will provide protection.

If you want a protective finsh, that doesn't change the color of the wood (much), is durable and resistant ti skin oils, take a tip from the turners, and use CA glue. It isn't just for pens anymore.

Test on a scrap to see if you like the look, and practice your application technique. I find the thin stuff gives me the smoothest result. Flood it on and just allow the excess to run off.

Good point highlander. Another option would be general finishes wood turners finish. That stuff is tough as nails and I recall when I tested some when it came out. They said It was actually more resistant to human oils than CA glue. But it does have an ever so slight amber to it  hardly noticed.

 

-Ace-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.