Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Quick outdoor finishing question

Featured Replies

About a year ago I made a cypress adirondack chair and applied a couple of coats of boiled linseed oil.  I'm not really happy with how the linseed oil is holding up, as the wood grain has raised a bit and the end grain has been starting to get a little mildewed, so I decided to go ahead and go the varnish route.  I got a quart of Minwax Pro Series Spar Urethane (http://www.minwax.com/wood-products/clear-protective-finishes/interior-exterior/minwax-pro-series-spar-urethane) and am planning to sand the chair a bit and brush it on.  

My questions are:  

1. What concerns (if any) do I need to have about applying the spar varnish over linseed oil?  Do I need a barrier coat?

2. Aside from sanding, do I need to do anything to stop the mildew that's starting to appear on some of the end grain?

Anyone have any ideas?

  • Author

Goodness.  I had no idea about mildew feeding on linseed oil!  Why on earth does it get recommended as an outdoor finish, then?

 

I'll definitely pick up some mildewcide.  What is TSP exactly?

Another thing about deck cleaner & pressure washing is that it removes the outer layer of grey degraded wood fibers, so that means less sanding

  • Author
2 hours ago, drzaius said:

Another thing about deck cleaner & pressure washing is that it removes the outer layer of grey degraded wood fibers, so that means less sanding

Sweeeet.  The chair actually sat in our shed all winter, so it's not nearly as weathered as it could have been.  Aside from the mildew I don't see any discoloration, so that's good.

  • Author

Incidentally, I don't have a pressure washer. Is there a suitable alternative?

21 minutes ago, Denette said:

Incidentally, I don't have a pressure washer. Is there a suitable alternative?

If you have decent water pressure, a Sweeper Nozzle will do in a pinch. It can be a bit of a pain, since the area covered is much smaller, but it only costs $5.

Garden-Nozzles-N547-New-2014.jpg

R

26 minutes ago, Denette said:

Incidentally, I don't have a pressure washer. Is there a suitable alternative?

Rent one at a big box store. Cheap & convenient. There really is no subsitute for the high pressure.

2 hours ago, wdwerker said:

It's a chair, take it to the car wash !

Great idea.

I have an ipe deck & every now & then think I'd like to have it look new again. Deck cleaner & a pressure washer sure do the trick. Can't really take the deck to the car wash though :( 

Clean the wood with the TSP and a brush.

Get a 1 gal bug spray bottle. Add some household bleach with a bit of water or use full strength. Spray the bleach let it soak in -- hit it with the garden hose. Scrub with a brush. repeat and repeat. Be good as new. 

 

-Ace-

  • 2 weeks later...
  • Author

cd664314928256c6890041f11c5ff457.jpg

Just a little update, I let the chair dry out in my garage for about a week so the water that had wicked up into the feet had a chance to dry out. I sanded the living daylights out of the bottom of the feet until all the discoloration, whether mold or just staining, was long gone. I sealed the bottom of the feel with a generous application of thick epoxy, so the chair basically has built-in plastic feet now. The end grain is totally sealed.

 

I realized that what I thought was mold along the end grain of the seat slats was actually rust creeping through from the screws that are concealed underneath some dowels. I assumed that because I had covered over the screwheads with dowels there wouldn't be any problem with rust, but evidently water was working in through the end grain of the seat slats and causing a little rust to seep through. So mildew wasn't anywhere near as bad a problem as I thought it was.

 

I sanded everything back to smooth, then hand-wiped the first generous coat of the finish and let it dry, sanded it back smooth with some 220 grit, and applied the last two coats with my hvlp.

 

The end result is pretty satisfactory. The finish is a nice flat satin sheen that only *kinda* looks like plastic. I'll update again when I see how it fares under duress.

  • Author
3 hours ago, AceHoleInOne said:

Looks awesome, great job. What approach did you use to clean the wood?

 

-Ace-

When I realized it was just staining and not mold I just decided to sand the whole thing down with 80 and work my way up through the grits.  Took things back to a place I was happy with, so I called it good.  

That's a great looking chair!

I love the artificial crotch figure in the back. 

I think that would be an awesome design if you could do the backs and arms from one live edged slab, keeping the live edges on the outsides of the arms, and then having each slat in the back be matching grain all the way across. 

  • Author
That's a great looking chair!

I love the artificial crotch figure in the back. 

I think that would be an awesome design if you could do the backs and arms from one live edged slab, keeping the live edges on the outsides of the arms, and then having each slat in the back be matching grain all the way across. 

 

That's not artificial! It's a single v-shaped wide slat with flatsawn cathedral grain. But thanks for the compliments on my design! It's an adaptation/chimaera I put together on my own by looking at some of Tim Celeski's outdoor arts & crafts collection - Google it, it's really nice stuff.

 

Next time I make one I definitely plan on doing a little more grain continuity.

  • 1 month later...
  • Author

Update! A month and a half later, having been spray-coated with the Minwax spar urethane I mentioned earlier in the thread and had its feet encased in thick epoxy, things seem to be going well. It's in direct sunlight about ⅓ to ½ the day, is exposed to rain, and still looks good.

dec15368592b1370f35859b71ff0e50d.jpg

 

The only areas of concern are from wood movement. Arkansas spring is a very wet time with big temperature changes every day. The oak dowels in the armrests have receded a tiny bit, or the armrests have swollen - but it is only maybe 1/32":

b95aefb5bc048846b4d548d3e06982ca.jpg

That picture is a good representation of the finish in general, btw. Smooth and satiny! Sure it looks like the chair has been wrapped in flat-finished Saran Wrap, but I'm not complaining if it is durable. I like the look, especially compared to natural weathering.

 

The other movement I noticed was on the top rail of the backrest. The stiles haven't expanded as much as the crest rail:

909081ec988c2e0a825075b34825df93.jpg

 

The epoxy is looking great. No moisture has wicked into the feet even in spite of a very rainy spring. The epoxy has some scratches because the chair is on concrete, but it is still super thick. It looks darker in the picture, but that's the effect of the epoxy on the wood, not moisture.

0fe833602252e8c6ab6f37ddb149efc1.jpg

 

So far so good! I may spray another coat on again before too long so I can get some coverage over those spots where the wood moved, but overall it appears to be doing well.

The length of the oak dowels won't change much . The armrest will change width some and thickness a little so the combination led to the recess .

 

.

Use SS screws next time. Will not rust.

 

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.