billiam62 Posted May 6, 2017 Report Posted May 6, 2017 Any one had experience with this saw? I don't have 220 in my garage and don't have a "dedicated" 20amp at the moment. I seriously considered the R4512 from Home Depot, the Delta 36-725 from Lowes and the Craftsman model in the same range. I just feel like I want something more beefy. Perhaps this doesn't even get me there. Trying to stay 15 amps or below. I do not want a job site type of saw as my projects require something better than that. I would rather have the Powermatic PM1000 or the 64B but I worry about what I have available in the garage so far as the power is concerned. Any info on the Rikon would be appreciated as well as any suggestions. Quote
..Kev Posted May 6, 2017 Report Posted May 6, 2017 Why not the Grizzly 0715P? Pretty good saw in that price range. 2 Quote
Just Bob Posted May 6, 2017 Report Posted May 6, 2017 Full disclosure, I am not a fan of Rikon. That said I agree with @TIODS, you would be much better off with a hybrid saw, and there are several in that price range. Quote
rrich1 Posted May 6, 2017 Report Posted May 6, 2017 I have the Delta from Lowe's and it has been pretty good for me. I added a router table on one side and a storage box on the other side. Sent from my Pixel XL using Tapatalk Quote
billiam62 Posted May 6, 2017 Author Report Posted May 6, 2017 The Grizzly 0715P has crossed my mind but then I am looking at 16amps in the 110 configuration. That has been a worry of mine. Quote
..Kev Posted May 6, 2017 Report Posted May 6, 2017 1 minute ago, billiam62 said: The Grizzly 0715P has crossed my mind but then I am looking at 16amps in the 110 configuration. That has been a worry of mine. Mine runs on a 20 amp breaker and I can switch it to 220 later if I want. Quote
bleedinblue Posted May 6, 2017 Report Posted May 6, 2017 Is there no possibility of running an extra 20 amp circuit? You'll be happier with the Grizzly, especially if you know you want more mass than the Ridgid, Delta or Craftsman. Quote
billiam62 Posted May 6, 2017 Author Report Posted May 6, 2017 There is but I will have to bring in a certified electrician. I have been told that I can do half breakers and such as my panel is full. That has been presented as the cheaper option. Getting a new panel is the other and that is not an option at all at this point. Quote
knotscott Posted May 6, 2017 Report Posted May 6, 2017 The Rikon is the same as the Steel City 35990. Steel City is now defunct, and I don't think they sold a lot of these...they just weren't around that long, so I'd suspect this particular Rikon could be difficult to source parts for. Otherwise, the saws had cabinet mounted trunnions and a hybrid style design with an internal belt drive motor. The fence had a two-piece front rail and wasn't particularly well received, though it's functional. Other than some initial release growing pains, I think it was a decent saw. How about a Jet Proshop hybrid? Excellent track record, cabinet mounted trunnions, nice fence. The 708492k starts at about $1200: SPECIFICATIONS:• Motor Voltage (V.): 115/230• Maximum Depth of Cut at 45 Degrees (In.): 2-1/8• Motor Power (HP): 1-3/4• Maximum Width of Dado (In.): 13/16• Table in Front of Saw Blade at Maximum Depth of Cut (In.): 10• Table Size with Extension (L x W) (In.): 27 x 44• Motor Amps: 15/7 The Grizzly G0771Z is a bit less expensive. $859 shipped. Has a bit lesser fence, and is less well proven, but gets mostly high marks from owners. Specifications: Motor: 2 HP, 120V/240V, prewired 120V, single-phase, 60 Hz Amps: 15A at 120V, 7.5A at 240V Quote
gee-dub Posted May 6, 2017 Report Posted May 6, 2017 You say you want something more beefy. When making a thousand dollar purchase, I have never understood buying a lesser machine due to existing electrical service. Most garages come minimally provisioned and out on the left coast we often have to add circuits just to be able to run a saw and the lights at the same time without popping a breaker. An under-provisioned circuit can cause many ills. If you're in a rental, that's different. I would research how much space you can recover for the cost of some half-height breakers and string a dedicated circuit for the saw whether 110 or 220 volt. I ran my hybrid on a dedicated circuit and it performed the same at 110 or at 220 (watts is watts) although folks love to argue startup times and other hair-splitting topics. The point is that I would not exclude an otherwise good saw from my short list just because the specs state an additional amp or two. Happy hunting ;-) Quote
billiam62 Posted May 6, 2017 Author Report Posted May 6, 2017 Point taken gee-dub. I will work on the electrical issue first and then get back to the list. Sounds like the Rikon is off the list anyway. Quote
wtnhighlander Posted May 6, 2017 Report Posted May 6, 2017 Gee-dub has a point, that 'watts is watts', and the saw should perform about the same on a 240 circuit as a 120 circuit. But going to 240 means that the amps will be lower for the same watts, and less energy is wasted as heat in the motor. And your circuit requires smaller wire for less amps. If you add a circuit at all, I see no sense in doing anything other than 240. Quote
Ronn W Posted May 7, 2017 Report Posted May 7, 2017 In about the same price range $1299 is the Laguna fusion cabinet saw - 36" rip, 120v. Very happy with mine and I like Laguna customer service. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.