Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

benches/tables/workbench ... discussing three

Featured Replies

  • Replies 64
  • Views 15.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Brendon_t
    Brendon_t

    This is going to come heavily to personal preference so take this fully as mine. I would not want my outfeed surface to also be my main work surface.  Main reason being, I may have parts of a pro

  • SawDustB
    SawDustB

    I know that usually the route people go with the roubo is to go all out, but it doesn't have to be that way. For my vises I'm at about 35% of the cost of having bought all bench crafted, and that's wi

  • I needed a dead flat assembly area that was not my bench.  I built a drawer unit (everything in my shop has storage in it) and added a top that can be adjusted or changed out completely.  It also acts

Posted Images

Just now, gee-dub said:

"Deadman" option. 

59281f6cbfc24_CoDMortisePal6.jpg.25bf967a3d9aad6b1f9a267064fa49b2.jpg

This only works until you run out of bench ;)

 

Where do you put your balls when planing? :D LOL

2 hours ago, Eric. said:

 

Where do you put your balls when planing? :D LOL

That's what the holes in the bench to are for.

Look to be about 3/4" or so... : /

 

If cost and size are the ultimate decision factor, the roubo may not be for you. If you think you will be sticking with this hobby for more than 5 years though, I would reconsider overlooking it.

I'm all for BOD and actually almost built a Shaker for that reason specifically but now that I've had the bench up and running, away from the wall long enough and still have zero regrets.

 

(Except not using a harder wood than ash but no way in hell I'm letting Eric hear that)

11 minutes ago, Brendon_t said:

(Except not using a harder wood than ash but no way in hell I'm letting Eric hear that)

Ash is plenty hard for a bench (1300)...barely softer than hard maple (1450).  If it wasn't for ash's open pores and its propensity to collect more filth (not really a big deal)...I'd rank it basically head-to-head with HM.

That may be so, but I will tell you that my bench is noticably softer than hard Maple. I can actually dig my finger nail in between the grain on the edge grain on the top. I've never seen hm like that.

You ain't lying about the pores either. I spilled a bag of purple powder dye and wiped it off with my hand.. there's a streak of purple stuck in the tiny pores and crevasses. Doesn't bug me but is there.

Just now, Brendon_t said:

That may be so, but I will tell you that my bench is noticably softer than hard Maple. I can actually dig my finger nail in

Weird.  Do you know which sub-species of ash you used, specifically?

5 minutes ago, Eric. said:

Weird.  Do you know which sub-species of ash you used, specifically?

No I don't. If you remembered, this was from a tree that was cut down locally. It was just two logs. No leaves.

5 minutes ago, Brendon_t said:

No I don't. If you remembered, this was from a tree that was cut down locally. It was just two logs. No leaves.

Hmmm...well now my curiosity is piqued.  I wonder if you actually have black ash or pumpkin ash?  The black ash is especially soft (for ash) at around 850 Janka.  Pumpkin ash is just under 1,000.  Both of those species are native to the eastern US...but that doesn't mean someone didn't plant one in California a long time ago.

I kind of doubt if you had white, green, blue or European ash that you'd be able to easily dig your fingernail into it.  They range between 1200-1500 Janka.

Really wish I used ash.  Dumb compromise on my part.  I prefer ash to hard maple only because of aesthetics.  I agree the open pores are annoying, but I just love the look of white ash.  

13 minutes ago, Eric. said:

 Both of those species are native to the eastern US...but that doesn't mean someone didn't plant one in California a long time ago.

 

Yeah, I assumed a while ago that the logs were one of the softer sub species. I love the bench and am splitting hairs.

California has non native trees everywhere. Since essentially it's a desert, very few hardwoods are native. During the big suburban build out in the 60s and 70s, it seems like they just threw darts to decide and planted at random.

  • Author
On 5/26/2017 at 6:32 AM, Eric. said:

 

:)

 

V.jpg

I saw that looking through Roubo Storage pics on google. great looking piece there! 

Also, as far as clamping and being able to hold long pieces like Eric mentioned and most likely needing something like a deadman ... would this  not work for most everything if you get the 2' model?

http://www.leevalley.com/us/wood/page.aspx?p=45114

I would assume you could have about a 10' board in there and be fine ... 4' on each side of the vise ... ??

Just now, bushwacked said:

I would assume you could have about a 10' board in there and be fine ... 4' on each side of the vise ... ??

Yeah it would hold a 10' board...until you tried to plane it.  You need support on both ends.  The offset nature of the fronts of those Sjoberg benches doesn't easily allow for that.

  • Popular Post

Also, if you have four additional feet of available space at the end of the bench...that's a pretty good reason to just build the larger bench in the first place.  I wouldn't consider building a small bench unless I absolutely had to.  People always claim that a table saw is the heart of the workshop...but really it's the bench.

4 hours ago, bushwacked said:

I saw that looking through Roubo Storage pics on google. great looking piece there! 

Also, as far as clamping and being able to hold long pieces like Eric mentioned and most likely needing something like a deadman ... would this  not work for most everything if you get the 2' model?

http://www.leevalley.com/us/wood/page.aspx?p=45114

I would assume you could have about a 10' board in there and be fine ... 4' on each side of the vise ... ??

I have to say, I used the twin screw vise at a seminar I took at Lee valley and I really wasn't a fan. The motion seemed clunky, and having the two handles there just seemed awkward. There was no way to adjust the vise quickly. It could be the one that I was using on a demo bench, since I know some people love them, but it quickly convinced me that it wasn't for me. I'm very excited about the leg vise, and the tail vise is just awesome for working on the faces of boards.

And on the length, as usual Eric's right. Make it as long as you can. Mine's 6 feet because that's all I could fit, and I'm so happy I didn't go with my plan to make it 5. 

On 5/25/2017 at 11:06 PM, bushwacked said:

 

8/4 hard maple is 4.05 BF at my local yard.

8/4 pecan is 3.80 BF

 

Those are the cheapest hard wood I can get.

 

 

Alright, I concede this.  My source I thought I was going to get 8/4 hard maple from for $2 doesn't cut 8/4 enough to have any in stock.  I can't find it that cheap anywhere else. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.