Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Making gnarly maple...less gnarly

Featured Replies

I set out to build my daughter a learning tower and at least minute decided to make one for my sister's daughter.  I'm making ours out of hard maple to match our maple cabinets, so I'm using the same for my sister's just 'cause I have it.

A good bit of this maple has dark mineral streaks or something.  Quite frankly, I cherry picked the better wood for our tower and I'm not wasting the streaky stuff, but I'm starting to feel a tad bit guilty for it

I'm not painting it and I'm not using a stain...is there anything else I can do to make it less ugly?  A dye or oil or something?  It kinda looks like a maple and a poplar had a baby.

*I don't think I have to mention it, but these are not cut to size, so the end checking and knots aren't an issue...*

20170701_142341.jpg

20170701_122136.jpg

20170701_142354.jpg

I can't help you, but I will say if this is a gift for your sister, she should be happy and probably won't care.

Probably silver maple.  Honestly I don't think it'll look too bad if you have consistent streaking throughout the entire project instead of just a board here or there.  Maple could use a little help in the interest department...if it's not figured, a little color isn't really a bad thing IMO.  I prefer heartwood over mineral streaking but something is better than nothing...sometimes.

To answer your question though...without adding color...not sure what else can be done to change it.  Build it well and finish it well...it'll be nice.

(Silver maple sucks though...for future reference.  It basically IS poplar, in terms of hardness and appearance.  Red or big leaf maple are the only soft maples I'll work with.)

  • Author

Red, silver, big leaf....ugh.  Hell, I thought there was just soft and hard, and one of those was silver and one was big leaf.

I agree the maple is boring.  I was pleasantly surprised to find enough light figure in the stock for our tower, and my sister's will have the mineral crap pretty consistently throughout.  This still would have been shop furniture or complimentary stock if our cabinets weren't maple.  I think in the end ours will match our kitchen really well.

That looks like the parts of a tree that were close to the Ambrosia beetle when he was making the tree his home.

  • Author
58 minutes ago, RichardA said:

That looks like the parts of a tree that were close to the Ambrosia beetle when he was making the tree his home.

Man, I'm already paranoid about bugs, that's not helping.  This is the first batch of wood I haven't bought from a lumber yard for a long time.  It is kiln dried though,  and bug holes were minimal.

  • Popular Post
3 hours ago, bleedinblue said:
Red, silver, big leaf....ugh.  Hell, I thought there was just soft and hard

 

There's only one hard maple...sugar maple, aka "rock maple." There are other names for it regionally but there's only one. It's the one the Canutians have on their flag and the one we get syrup from. Hard maple is what typically produces birdseye.

There are several soft maple species, maybe a dozen or more. The two most important to furniture makers are red maple, which is indigenous to the northern, eastern and midwestern US, and big leaf, which is a northwestern species. Big leaf produces quilted maple, and is the most desirable IMO. Red leaf is the hardest of the soft maples (similar to cherry and walnut) and yields most of the curly maple you'll find in our part of the country (red leaf is what we stock at U-Pick, both curly and generic soft maple).

Silver maple is the red oak of the maples...basically a weed and not a great furniture species in terms of hardness or aesthetics. Although ambrosia is more commonly found in silver maple than the others, in my experience...if you happen to like ambrosia for some reason.

Sent from my SM-G930V using Tapatalk

 

@bleedinblue did you considered carving or texture that wood ? Simple routed stripes or brushed surface can catch light and shadows and act as an eye catcher, more important to the eye than the wood grain. Of course, this is more work to do, but it can greatly improve the piece.

waystoaddtexture_2.jpg

waystoaddtexture_8.jpg

glavnyidom.ru-12-uzorov-po-derevu-svoimi

waystoaddtexture_12.jpg

61d64db71c04bfe4ad03986b8aece151.jpg

brosse-structure-bois-2608622130-1.jpg

brett2_10.jpg

There's endless possibilities...

  • Author
5 hours ago, Jean [Fr] said:

@bleedinblue did you considered carving or texture that wood ? Simple routed stripes or brushed surface can catch light and shadows and act as an eye catcher, more important to the eye than the wood grain. Of course, this is more work to do, but it can greatly improve the piece.

There's endless possibilities...

Not for this piece.  I'll likely explore those techniques in the future, but this thing is a fancy toddler step stool, it's gonna get beat to hell for six or seven years.  I'm not going to invest that kind of labor into a piece like this. 

12 minutes ago, wtnhighlander said:

Blue, you're going to finish it with something, right? Why not mix a tint into the finish?

Or did you plan to deliver it unfinished?

 It'll likely get the ol faithful ARS.  I might experiment with some tints. 

On 7/2/2017 at 10:04 AM, bleedinblue said:

Not for this piece.  I'll likely explore those techniques in the future, but this thing is a fancy toddler step stool, it's gonna get beat to hell for six or seven years.  I'm not going to invest that kind of labor into a piece like this. 

 

Don't worry blue, by the time the kid is done with it, it will be textured just like Jean's photos. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.