Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oak Coffee Table India Ink

Featured Replies

  • Popular Post

I just finished this oak piece made from leftover oak flooring and a few pieces of oak lumber from the big box.

Dyed with Speedball India Ink and Shellac. 

coffee table.jpg

slats.jpg

base.jpg

That does look pretty cool. And by finished, I assume you mean the finish is complete and not the project? Keep us posted with the finished project. 

  • Author
18 minutes ago, K Cooper said:

That does look pretty cool. And by finished, I assume you mean the finish is complete and not the project? Keep us posted with the finished project. 

I'll post a picture when we get the granite slab.

  • Author
11 minutes ago, Adam Campbell said:

Hey Glenn, I think Lester was asking, as I was, what methods did you use to do the joining/fastening?  

wood screws under the slats I have a 1" x 6" piece with holes, I'll take a picture  and post it.  I made it this way so it can be taken apart this weighs a ton.

  • Author
9 hours ago, Lester Burnham said:

Interesting design, man. Looks like you've got those miters down pat.

+1 on that and also how did you secure those strips between the Vs?

thanks, miter sled on my table saw helps, dowels and glue

Looks great! I have wanted to try India ink on a project now I really do. Nice car too.

  • Author
7 hours ago, pkinneb said:

Looks great! I have wanted to try India ink on a project now I really do. Nice car too.

Thanks, goes on really easy I used a sponge brush.

I was originally going to ceruse it but chickened out ceruse pic below. 

 

BLACK-CERUSE-2-835x471.jpg

  • Author
9 hours ago, Adam Campbell said:

Looks real nice Glenn.  How are you securing the top to the sides?

Adam, the top will be a 30" x 57" slab of granite, the granite should weigh around 200 lbs.  I'll put some gripper strips on the top of the wood sides.  I believe this should hold it in place.... 

  • Author
9 hours ago, Adam Campbell said:

Hey Glenn, I think Lester was asking, as I was, what methods did you use to do the joining/fastening?  

 

20170731_184624.jpg

  • Author

built to hold a lot of weight top and bottom

gripper on top to keep the granite from sliding

felt on bottom to slide the table on foor

 

20170801_101646.jpg

20170801_105721.jpg

20170801_112831.jpg

I really like this, great job! I look forward to seeing it with granite but glass would be cool too.

  • Author
14 hours ago, pkinneb said:

I really like this, great job! I look forward to seeing it with granite but glass would be cool too.

thank you, the slab will be here next wed.

I like the design too it's not easy to get a even black.Ive tried and I ain't trying anymore.

Im a little bit concerned about the granite not having enough support in the middle. Esp if someone sits there 

Im not a granite scientist so I'm just going by gut.

Good luck

A layer of 3/4" ply under the granite that stops about 2-3" from all edges will never be seen if the edge is black. If the granite has a layer of fiberglass on the back it would help but I still wouldn't sit or stand on it. 

Now it all makes sense. Even a pic (the first one posted) didn't help this old guy as I thought you had it upside down with the slats being on top and then you were putting the granite on top of the slats. That's cool, it just took me a while:wacko:!

  • 2 weeks later...
  • Author
On 8/3/2017 at 9:14 AM, Unknown craftsman said:

I like the design too it's not easy to get a even black.Ive tried and I ain't trying anymore.

Im a little bit concerned about the granite not having enough support in the middle. Esp if someone sits there 

Im not a granite scientist so I'm just going by gut.

Good luck

The India Ink was easy to apply and came out great IMO.  I have thought about that, the guy that dropped off the granite didn't say a thing, he did try and lift the piece up TRY...

 

  • Author
  • Popular Post
On 8/3/2017 at 3:37 PM, wdwerker said:

A layer of 3/4" ply under the granite that stops about 2-3" from all edges will never be seen if the edge is black. If the granite has a layer of fiberglass on the back it would help but I still wouldn't sit or stand on it. 

I wasn't planning on sitting on it and I hope no one else will except for the cats.

20170809_120411.jpg

20170809_120358.jpg

20170809_120328.jpg

Wonderful piece of stone you picked out. It complements the base you made. 

Children and drunk friends at a party come to mind, or someone standing in the middle of it to change a lightbulb. 

  • Author
22 minutes ago, Lester Burnham said:

That looks great, dude. You should reconsider that adivce about reinforcing the top. Low tables become seats easily.

I hear you, I'll give it some thought...thanks!

 

That is a beautiful piece of granite.   If you are not having any huge parties, and dont have small children, I dont think you have to worry about someone sitting on it.

Not too big of a fix, if some concern is starting to creep in.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.