Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Alder Opinions?

Featured Replies

At work the other day, we made a bunch of structural elements for a piece out of alder cutoffs.  We usually just use 1"x1" - 2"x2" x 14' maple pieces, but if our mill has some lumber leftover from a project, they mill that up in to blocking material.  Seen Walnut and Cherry come through this way already. 

Having never seen any, I was kind of impressed with the Alder, nice grain, nice color, similar to cherry.  One guy said he hates working it as it's too soft.  What's your opinions on it? 

Alder is soft but a nice wood to work with. I wouldn't make a table or Roubo out of it but it would be fine in certain applications. It is also great for smoking salmon. 

Left is cherry and right alder finished with super blonde shellac and waterborne. 

1707_wood_016.thumb.jpg.4529fd4b1bc15f81f7284fadad64dc22.jpg

Definitely soft but I think clear alder can be beautiful wood.  Creamy, caramelly color and has nice grain.  I haven't used much of it but it works like butta.  I'd use it more often if it wasn't so soft.  If I do ever put it in an important project it won't be one I expect to get abused.  I think it would make a nice accent wood for a lot of other species...with cherry or walnut definitely.

I like Alder.  I have used it for my coffee table.  Not subject to much abuse. I found out about it when we had our kitchen cabinets built a few years ago.  My entire kitchen is clear alder

I like it too. I've made a few pieces that I'm pretty happy with. It's cheaper than most hardwoods, has great color, and oftentimes it has interesting grain. Arm-r-seal works well with it, which is nice.

This "it's soft" attitude is correct but perhaps a little overstated. I mean, people have pine furniture in their houses, and it gets dented but that's not a total catastrophe. What's a few dents in your furniture amount to? That's called honest wear on the Roadshow...

Of course, if you have kids all bets are off. They destroy anything, so it hardly matters which species you use.

 

Never worked with it before. In my neck of the woods it isnt that cheap. It is more than soft maple, and maybe 5-10% less than cherry or hard maple. I take it this species is more common in the west? Cherry kinda grows like a weed in PA, so my prices might be skewed a bit.

42 minutes ago, Pwk5017 said:

Never worked with it before. In my neck of the woods it isnt that cheap. It is more than soft maple, and maybe 5-10% less than cherry or hard maple. I take it this species is more common in the west? Cherry kinda grows like a weed in PA, so my prices might be skewed a bit.

Yeah you are in cherry heaven.  There's a reason the best cherry in the country is labeled "Pennsylvania cherry."  That doesn't necessarily make it cheap because you live near it (think walnut in MO...still expensive) but it doesn't hurt either.

The alder commonly used for woodworking is red alder, and it's most definitely a western species.  Very western.  It doesn't really grow in that large of a geographical area, but it grows fast and grows big.  It's used as a pioneer species for clear-cut conifer forest.

Just to put its softness in perspective, tulip poplar is 540 Janka...alder is 590.  It's soft.  And unless I'm building a rustic piece, I do not want dents on my furniture when someone breathes on it wrong.  And I'm not building a rustic piece.

45 minutes ago, Eric. said:

 And I'm not building a rustic piece.

If you change your mind, let me know. I can send over some primo quality rustic barn wood for you to try.

It's tough to work with, so I recommend you start off with something simple. Perhaps a bird house.;)

 

For comparison, consider the softer woods which are sometimes used for making furniture:

Eastern White Pine 380 janka

Western White Pine 420 janka

Lodgepole Pine 480 janka

Douglas Fir 620 janka

Red Cedar 350 janka

Alder is used for cabinets and trim, in my neck of the woods (Mountain West).  I acquired a bunch of leftover trim, from a new house construction, and used it to back the modular racks in my garage.  None of the cabinets have acquired dents, just yet while the white oak (engineered) flooring has lots of dents.

Probably just depends on your application.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.